Table of Contents
What is a circular pattern?
Use circular patterns to create multiple instances of one or more features that you can space uniformly around an axis. Pattern instances inherit the feature color of the original feature when the: Pattern is based on one feature.
How do you add a bolt circle in Solidworks?
Drafting. First, create center marks by selecting the center mark creator from the Annotations tab. Select the bolt circle center mark, then select all holes in the bolt circle in a single view to create a center mark and bolt circle radius construction line.
What tool allows you to create a pattern in a circle Onshape?
Tap Circular pattern tool. Specify Pattern type: Part – To pattern an individual part. Feature – To pattern a specific feature (or features) listed in the Feature list (an extrude, fillet, sweep, sketch, etc.).
How do I create a circular pattern in Solidworks assembly?
You can create a circular pattern of components in an assembly. To create a circular pattern of components: Click Linear Component Pattern > Circular Component Pattern (Assembly toolbar) or Insert > Component Pattern > Circular Pattern.
What is pattern seed only solidworks?
Pattern seed only option selected. The seed feature only is replicated in Direction 2. The entire linear pattern is replicated in Direction 2. Search ‘Example of Linear Pattern Seed Feature’ in the SOLIDWORKS Knowledge Base.
How do you do a hole callout in Solidworks?
To add a hole callout: Click Hole Callout (Annotation toolbar), or click Insert > Annotations > Hole Callout. Click the edge of a hole, then click in the graphics area to place the hole callout. Edit the callout in the Dimension PropertyManager. Repeat steps 2 through 4 to insert additional hole callouts, then click .
Can a bolt circle be a datum?
Bolt circle is not a physical feature of the part therefore can’t be used as datum feature to establish datum axis.
What is bolt circle diameter?
Bolt Circle Diameter (BCD) is the diameter of the circle that goes through the center of all of the bolts on your chainring. On bicycle chainrings, this dimension is usually measured in millimeters. On a chainring with 4 bolts, the BCD is the distance between two bolts across from each other.
How do you create a body pattern in Solidworks?
Some bodies and a single direction selected. To create a pattern of patterns: Click a pattern tool (Features toolbar) or Insert > Pattern/Mirror and select a pattern tool (linear, circular, or curve driven pattern). You can also use a pattern you created using X-Y coordinates (table pattern) or sketch points.
How do you center a circle in Solidworks?
To create a centerline: Click Centerline (Sketch toolbar) or click Tools > Sketch Entities > Centerline. Click to start the centerline. Drag, or move the pointer and click, to set the end of the centerline.
How do you move a circle on shape?
Steps Click . Select the sketch entities you want to move. Use the manipulator to drag and orient the sketch. Click in space when the sketch is placed and oriented as desired.
How do you put shapes on shapes?
From within an Onshape assembly tab, click on the insert button to open up the insert dialog. From here, navigate to the desired Document and select the Part Studio or assembly that contains the sketches and surfaces you would like to insert.
How do I create a sketch pattern in Solidworks?
Creating Linear Sketch Patterns In an open sketch, click Linear Sketch Pattern. (Sketch toolbar) or Tools > Sketch Tools > Linear Pattern. In the PropertyManager, under Entities to Pattern, select the sketch entities to pattern . Set values for Direction 1 (X-axis). Repeat for Direction 2 (Y-axis). Click .
What is Hole Wizard in Solidworks?
You can use the Hole Wizard to create customized holes of various types. To create hole wizard holes, create a part and select a surface, click Hole Wizard (Features toolbar) or Insert > Features > Hole > Wizard, set the PropertyManager options, and click .
How do you use a linear component pattern in Solidworks assembly?
Linear Component Pattern Click Linear Component Pattern (Assembly toolbar) or Insert > Component Pattern > Linear Pattern. In the PropertyManager, specify options under Direction 1: Repeat for Direction 2 for a bidirectional pattern. Click in Components to Pattern , then select the seed components.
What is linear pattern in Solidworks?
Use linear patterns to create multiple instances of one or more features that you can space uniformly along one or two linear paths. Click Linear Pattern (Features toolbar) or Insert > Pattern/Mirror > Linear Pattern. Set the PropertyManager options.
What does pattern seed only mean?
Pattern seed only. Creates a linear pattern in Direction 2 using the seed features only, without replicating the pattern instances of Direction 1. Pattern seed only option selected. The seed feature only is replicated in Direction 2.
Where is linear pattern in Solidworks?
The Linear Pattern PropertyManager appears when you pattern one or more features along one or two linear paths. To access this PropertyManager: Click Linear Pattern (Features toolbar) or Insert > Pattern/Mirror > Linear Pattern.
What is a hole callout?
The Hole Callout tool adds driven diameter dimensions to holes created by the Hole Wizard or circular cut features. Best results are obtained by creating holes using the Hole Wizard. Hole callouts are available in drawings. If you change a hole dimension in the model, the callout updates automatically.
What is threaded hole?
Tapped holes are made in sheet metal parts by first starting with a laser cut hole. That hole is then treated with a treading bit to create threads in the hole for use with a screw or bolt with matching threads to hold a component or attaching the sheet metal part to another component.
