Table of Contents
How do you use an architect’s scale ruler?
How to use an architect scale ruler Determine the scale used for the architectural drawing you’re reading or creating. Find the corresponding scale on your ruler. If you then want to measure out a 4-foot wall at a particular scale, simply begin your line at zero and draw it to the “4” mark on that scale.
How should you read an architect scale?
Using your architect scale, select the face of the tool with the 1/8 mark in the upper left-hand corner. Lay the “0” point at the extreme left end of this line, and read the corresponding value at the right end of the line. You should see the value “32” on your scale.
How does a scale ruler work?
A scale ruler is the three-sided ruler used by architects and readers of blueprints to convert between scaled drawings and the actual dimensions without having to resort to any mathematical calculations. An architect uses the scale ruler to convert dimensions into a smaller drawing of a building plan.
How many scales are on an architect’s ruler?
For accuracy and longevity, the material used should be dimensionally stable and durable. Scales were traditionally made of wood, but today they are usually made of rigid plastic or aluminum. Architect’s scales may be flat, with 4 scales, or have asymmetric 3-lobed cross-section, with 6 or 12 scales.
How do you read scale drawings?
The scale is shown as the length in the drawing, then a colon (“:”), then the matching length on the real thing. Example: this drawing has a scale of “1:10”, so anything drawn with the size of “1” would have a size of “10” in the real world, so a measurement of 150mm on the drawing would be 1500mm on the real horse.
How do you use a 1 50 scale ruler?
You could also say, 1 unit in the drawing is equal to 100 units in real life. So, if we were drawing a table that measured 100cm wide by 200cm long at a scale of 1:50, you would draw the table 2cm wide by 4cm long on your piece of paper. This is worked out by dividing the real life size (100cm) by 50 (1:50 scale).
Can you use a normal ruler as a scale ruler?
You could measure with a normal ruler (metric or inches) and multiply the measurement by the scale. If you measured 51 millimeters on a 1:50 drawing using a normal metric ruler, the length of the actual object would be 51 x 50 = 2,550 millimeters.
How do you convert an architectural scale?
To convert a measurement to a larger measurement, simply multiply the real measurement by the scale factor. For example, if the scale factor is 1:8 and the measured length is 4, multiply 4 × 8 = 32 to convert.
Can a standard tape measure be used to scale a drawing with an architectural scale?
A standard tape measure can be used to scale a drawing with an architectural scale.
What is the importance of scale in architectural drawing?
Scale allows us to understand the relationship between a representation – a drawing or model – and reality. Being able to draw accurately to scale, and to shift fluidly between scales, is one of the most important aspects of architectural drawing and spatial design.
What is architectural scale mean?
: a scale of rule usually of triangular section made of boxwood and having a variety of graduations on its edges, one edge usually being graduated in inches and sixteenths of an inch, the other edges graduated in twelfths and fractions thereof for lengths of 3 inches, 1¹/₂ inches, and 1 inch so that dimensions of.
What is the difference between an architect’s scale and an engineering scale?
The architect’s scale is used by architects and builders for obtaining measurements from scaled drawings of buildings and other structures. The engineer’s scale, also known as a civil scale, is used for measuring length and transferring length measurements at different scales or proportions of actual length.
How do you use a 1 100 ruler?
A scale of 1 to 100 is indicated on a drawing using the code 1:100. This can be interpreted as follows: 1 centimetre (0.01 metre) measured with a ruler on the plan would need to be multiplied by 100 to give the actual size of 1 metre.
What is a 1/10 scale?
A scale of one to ten, or scale from one to ten, is a general and largely vernacular concept used for rating things, people, places, ideas, and so on.
Do you start measuring from 0 or 1 on a ruler?
Line up the start of your tool with 1 end of whatever you’re measuring. Place the starting end of the measuring tool where it says “0” against the closest edge of the object or distance you’re trying to measure.
Why do we measure ruler?
Desk rulers are used for three main purposes: to measure, to aid in drawing straight lines, and as a straight guide for cutting and scoring with a blade. Practical rulers have distance markings along their edges.
What does a scale of 1 20 mean?
What does a 1:20 scale mean. The same goes for a 1:20 scale, which when used, represents a subject at a size 20 times smaller than its real word dimensions.
What does a 1/4 scale mean?
Example – Blueprint Drawing Scale 1:50 An actual length of 1 cm is measured on a 1:50 blueprint floor plan. The physical length can be calculated as. (1 cm) 50 = 50 cm. Imperial Units – US. A 1/4″ scale means that each 1/4″ (inch) on the plan counts for 1′ (feet) of actual physical length.
How do you convert scales to drawings?
Converting using a scale factor To convert from a scale drawing to real life, measure a line in the drawing and multiply it by the scale factor to find the real length. To convert from real life to a scale drawing, divide the real life measurement by the scale factor.
