Table of Contents
Using your bolt cutter, cut the wrench at the bottom of the Long side L-shape. Make an even cut, creating a flat and even surface to insert into the chunk of the power drill. Test the drill bit: Insert the well-cut Allen wrench drill bit into the nose of the drill. Lock the hex key into place.
Is there an easier way to use an Allen key?
Start by securing the hex key wrench in a vise and cutting off the shorter end of the wrench with a hacksaw or grinder. Chuck the straight piece of wrench in a drill and set the torque on the lowest setting, so it will slip instead of damaging the piece or fastener.
How do you use Allen key screws?
When you need to use the Allen wrench, stick the short end of the L shape into the bolt head and press down on the longer side of the L to turn the bolt. Of course, the Allen wrench will only fit in a hex bolt (a bolt with six sides), so don’t try using the Allen wrench to screw in any other type of fastener.
How do I turn on my Allen key?
An Allen wrench, or “hex key” is tool used to turn Allen screws or bolts. Pick up the Allen wrench. Stick the end into the hole that looks like a 6 sided stop sign. Turn clockwise to tighten and counter clockwise to loosen. Voila! You did it!.
What can I use instead of Allen wrench?
Wrenches Similar to Allen Wrenches Hex Wrench of Hex Key Wrench. Torx Key. Torque Wrench. Things Around the House. In Your Kitchen. Screwdrivers. Nuts and Bolts. Open Ended Wrench or Combination Wrench.
How do I make my Allen key faster?
????To speed up the furniture assembly process, cut off the short L-leg of the wrench with a grinder or Dremel tool, then chuck the remaining long leg into a cordless drill. Now use the speed of the drill to quickly tighten all the hex screws. Allen wrenches come in both SAE fractional-inch sizes and in metric sizes.
How can I open my Allen key without key?
Use a fine hacksaw blade and cut a straight slot in the head of the fastener . Cut it deep but not so deep that you cut through the “shoulder “ or bottom of the head . Take a straight screwdriver and remove or insert the fastener . This works great for fasteners with stripped heads without using a special tool .
Are hex bits and Allen keys the same?
Are hex and Allen keys the same thing? Although there’s always some potential for confusion wherever two different terms are used for the same item, in this case it’s pretty straightforward – to all practical intents and purposes, hex keys/wrenches and Allen keys are indeed essentially the same thing.
Are hex keys and Allen keys the same?
A hex key, also known as an Allen key is a simple tool used to drive bolts and screws with hexagonal sockets in their heads. From standard keys in chrome vanadium steel to extra-long with ballpoint heads in chrome molybdenum steel, there are a wide variety to choose from.
What are Allen key screws called?
Socket Head Cap Screws, which are also known as Allen head screws are stock items at Lightning Bolt in many materials sizes. These screws come with a hexagonal cross-section socket in the head and require an Allen wrench or hex key to drive them into material and secure them into a structure.
What do I do if I get the wrong size Allen key?
6 Answers Find a bolt whose head is the required size. Insert the bolt head half-way into the socket. Find a bolt whose head is the required size. Turn two nuts on and counter-tighten them (jam them together). You can get a decent set of hex wrenches for $10 – $15; possibly much less if you wait for a sale.
How do you open a L key screw without Allen?
How to Remove Allen Head Screws Without an Allen Head Screwdriver Try to find a standard screwdriver that fits snugly between two of the points of the screw. It should fit with no wiggle room. Get your hacksaw. Put a small toothed blade on the saw. Use a standard screwdriver that fits the groove you just made snugly.
How do I know my Allen key size?
Hex keys measurements are done across-flats or AF. This simply means that they are measured from one flat side of the head to the one directly across from it.
Why are they called Allen wrenches?
The “Allen screw” name for the socket head cap screw and “Allen key” for the wrench originate from the products of the Allen Manufacturing Company of Hartford, Connecticut. According to Bates, it is widely reported that the company trademarked the name “Allen wrench or key” for its range of hex wrenches in 1943.
Can you use a drill to drive screws?
Most cordless drills are intended to be used as screwdrivers. Almost all cordless drills on the market have both variable speeds and a clutch, allowing them to drive and remove screws. I also recommend grabbing a drill bit extender. They make driving screws much easier, and only cost a buck or two.
Why is a hammer drill used?
A hammer drill delivers more power in the form of a hammering action. The force of the hammer drill is applied directly to the bit. They are most commonly used for drilling in concrete and masonry. The hammering portion of this motion can be turned off, allowing the tool to function more like a standard drill.
Can you use a drill as a torque wrench?
You use a drill/driver with an adjustable torque setting. You use it to put the bolts or nuts on, but have it set to snug but a good bit below proper torque. Then you just torque them all with a torque wrench.. It will also remove them quickly once you have broken them loose.
