Table of Contents
Operate the Snow Blower Wear safety glasses. Start the snow thrower and position it for the first pass. Adjust the direction of the discharge chute. Engage the drive control to begin forward motion and the auger lever to begin throwing. At the end of the first cleared path, disengage the auger and drive lever.
How many inches of snow before you use a snowblower?
Snow Blowing Tips This Old House recommends using a snow blower if there’s at least 2 inches of snow on the ground. Speed is also a factor for snow blowing, according to Consumer Reports.
How do you use a snowblower on a driveway?
2. Center Yourself. As you’re rolling your snowblower out of your garage, you should immediately head for the middle of the driveway. By starting in the middle, you can work your way outward in a circular motion and blow the snow away from where you’ve already been.
How do you start a cold snow blower?
Electric start snow blowers plug into an extension cord. Once plugged in, push the small button near the plug until it starts, then unplug the cord and you’re good to go. Some models have an automotive-style ignition, which starts like a car or truck. Just turn the key and clear some snow.
When should you use a snow blower vs shovel?
A snow blower will clear snow off your driveway and sidewalk for you. A snow blower clears snow faster than a shovel. The wider the intake housing of the blower is, the quicker you will finish clearing your driveway. Single-stage snowblowers clear 12 to 21 inches wide.
How do you turn a snowblower on?
Many people purchase snow blowers with the power steering option. This allows you to slow down or stop one wheel while making a turn. To make a proper turn, disengage the augers, then squeeze the steering lever handle on the side you want to turn into.
Can snowblower remove ice?
Yes, a snowblower can also remove ice, but how well it goes depends on the thickness of the ice and the size and weight of the snowblower. The snowblower needs to break the ice into chunks that can be pickup by the augurs. A bigger, heavier and more powerfull snowblower will be able to break thicker ice.
When should you start shoveling snow?
Shoveling should be done early in the morning and frequently throughout the day to prevent snow accumulation. When there is a modest amount of snow on the ground, the sun can quickly melt it once the snowstorm has passed. You should shovel to one side and straight ahead.
Does a snow blower work on heavy wet snow?
A single-stage blower doesn’t do much to break down chunks of snow and ice, so it isn’t ideal for wet snow. Additionally, in a single-stage snowblower, the auger touches the ground. Despite being the simplest kind of snow blower, a single-stage snow blower can handle a little wet snow.
Will a snowblower work on a gravel driveway?
The simple answer to this question is yes, you can snow blow a gravel driveway properly if you have the right equipment. A two-stage blower is much better, while a two-stage blower with self-propelling is even better as you wouldn’t need to push them, while a 3 stage snow blower is simply perfect for the job.
Can I use snow blower on grass?
Although the answer is yes you can use a snowblower on grass and gravel, it does actually depend on the snow blower and setup you have. However, certain types of snow blowers are equipped with skids and these are the snow blowers that can be used on grass, uneven, or unbound surfaces.
How long does it take to clear a driveway with a snowblower?
Each one took an hour to an hour and a half. That’s using two 8 horsepower two stage snowblowers and 3 men. An average storm say one foot of snow with about 2 to 3 feet at the end of the driveway, 2 people 45 minutes to an hour per drive. One person an hour per drive.
How do you start a snowblower after sitting?
To start a snowblower after sitting, you first need to drain the tank and add fresh fuel and stabilizer to it. 1.1 Check If All Switches Are In The Right Position. 1.2 Change The Gas And Add Stabilizer To It. 1.3 Prime The Engine. 1.4 Clean The Carburetor. 1.5 Check The Fuel Line And Fuel Filter. 1.6 Replace The Spark Plug.
How do I get my snow blower ready?
INSTRUCTIONS: Prepare your snow blower for maintenance. Place your snow blower on a flat surface. Change the engine oil in your snow thrower. Install a new spark plug if necessary. Inspect belts for wear. Drain the gas tank and replace with fresh fuel. Lubricate the drive and chassis.
Where should choke be when starting snowblower?
Check Choke Position Always use the choke to start a cold engine, turning to “Full Choke.” Check your Owner’s Manual for proper choke positioning. If the temperature is above 32 degrees, priming the carburetor may flood the engine easily so try only choking the engine.
Should I put fuel stabilizer in my snowblower?
Stabilizing the gas in a can should be done before filling up your snowblower to ensure that your engine will continually run clean and start reliably during the winter and after off-season storage.
What does the choke do on a snowblower?
The choke on a gasoline-powered snowblower engine is designed to help the motor start when it is cold. The choke works by shutting the air intake to produce a richer gas mixture in the engine’s combustion chamber.
