Table of Contents
Can you use Sawzall to cut metal?
Reciprocating saws can churn through metal, masonry, wood, plaster, fiberglass, stucco, composite materials, drywall and more. The key to a successful cut is using the right type of blade for the material you are cutting. This guide highlights the teeth, dimensions, composition and uses of reciprocating saw blades.
How thick of metal can a Sawzall cut?
There are different types of metal cutting blades that you can apply depending on the metals’ thickness. Reciprocating saw blades are highly suitable for cutting thin to thick metal (1-8 mm), coarse wood, firewood, green wood, branches, and gardening work.
What kind of Sawzall blade cuts metal?
In general, the best sawzall blades for cutting metal have a higher TPI (Teeth Per Inch) and are bi-metal or carbide tipped. The right TPI and blade material depend on the type of metal being cut and its thickness. Cutting thinner metals, including sheet metal, requires a finer cut. Use 18-24 TPI bi-metal blades.
Can you cut metal with a wood Sawzall blade?
With the right blade, your sawzall can cut through wood, nails, fiberglass, branches, plaster, masonry, and metals including aluminum, cast iron, steel, and even high-strength alloys.
Can a Sawzall cut hardened steel?
Carbide tipped blades cut harder, denser metals like hardened steel, cast iron, alloys including boron steel, and higher grades of stainless steel. Diamond Grit blades also cut hardened steel, however they are expensive and take longer to cut through the material.
How can I cut metal quickly?
An angle grinder fitted with an abrasive metal-cutting disc works well to cut all kinds of metal, including bolts, angle iron, rebar and even sheet metal. But the discs wear down quickly, cut slowly and shrink in diameter as you use them. Instead, we recommend using a diamond blade that’s rated to cut ferrous metal.
What is the best tool to cut metal pipe?
Heavy-duty steel pipe and tube cutters are usually the easiest to use, but for tight spaces, an angle grinder or reciprocating saw may be needed. When using a metal pipe cutter, align the tool around the marked place on the galvanized pipe and rotate so that the wheel cuts deeper into the pipe until severed.
Can you Sawzall steel?
Sawzall is another name for a reciprocating saw. It is a trademark of Milwaukee, a renowned Wisconsin-based power tools manufacturer. This tool is perfect for cutting steel, cast iron, aluminum, copper, and almost every type of metal. You can also use it on wood and PVC materials.
Is a Sawzall the same as a reciprocating saw?
Sawzall—though a registered trademark of Milwaukee Tool—is the term often used to describe any brand of reciprocating saw. It’s not hard to see how the nickname developed since a reciprocating saw indeed “saws all” materials.
Can a Sawzall cut through rebar?
The Reciprocating Saw A reciprocating saw is another option. As with a hacksaw, you will need a suitable blade for cutting rebar – one with fine, sharp teeth.
What blade Do I need to cut metal?
Ferrous blades are ideal for cutting metals that contain iron, such as stainless steel or cast iron. Choose a non-ferrous blade when cutting softer metals, like aluminum or copper. For the best results, use a diamond blade that’s rated to cut the type of metal you are working with.
Do all reciprocating saw blades fit?
Yes, reciprocating saw blades have a universal shank that is standardized to fit all reciprocating saws.
What does TPI stand for on saw blades?
TPI is the number of teeth the blade has per inch. If you’re looking to cut wood or other soft materials, you’ll need a blade with a TPI of 6 up to 20. For harder materials like metal, a TPI between 14 up to 36 is more suitable.
What is 14 TPI for cutting?
A blade with 14 TPI is coarse whilst a blade with 32 TPI is very fine. They do not last as long a High Speed Steel blades. These are much more expensive but keep their cutting edge for longer and are suitable for cutting hard materials such as stainless steel and alloys.
What is the difference between a wood cutting blade and a metal cutting blade?
The main differences are in teeth per inch (TPI), blade material, and/or blade shape. Wood Cutting Blades normally have 5 to 10 TPI and are best for cutting most types of wood, branches, and softer materials. They will also cut nails. Metal Cutting Blades have more teeth per inch for cutting harder, denser materials.
What is HCS blade?
High Carbon Steel – the softest of the blade materials. HCS blades are flexible to allow bending without breaking, which also makes them the least durable. They are best suited to cutting softer materials. They are used to cut thicker pieces of metal including cast iron, stainless steel, and high-strength alloys.
What will cut through hardened steel?
If a clean cut is desired when cutting through hardened steel, or if the steel’s hardness must be retained, a fine toothed hacksaw will work wonderfully, though the process is long and will require a great deal of intense effort.
What is a carbide tipped saw blade?
With something like a carbide-tipped saw blade, the main body of the blade is made of steel. The small tips of carbide are brazed on to the body. A good carbide tip might hold an edge ten to twenty times longer than a tool steel tip. The carbide tip on a typical circular saw. Carbide tips do get dull eventually.
How much is a Milwaukee Sawzall?
Compare Similar Reciprocating Saws current product Exclusive Best Seller Milwaukee RIDGID Milwaukee 12 Amp SAWZALL Reciprocating Saw with Case Fuego 10 Amp Orbital Reciprocating Saw M18 FUEL 18-Volt Lithium-Ion Brushless Cordless HACKZALL Reciprocating Saw (Tool-Only) $11900 $11900 $15900 (730) (330) (1489).
