Table of Contents
Which way do you turn a plumbing snake?
Place the snake cable down the drain. As you push the snake into the drain, rotate the handle clockwise. You may need to use both hands on the handle if you are having trouble pushing. To feel for the clog, it is a good idea to move your hands lower on the cable, about three inches above the opening of the drain.
How do you use a drain snake?
Steps for using a drain auger Push the end of the snake into the drain opening and turn the handle on the drum that contains the coiled-up snake. Keep pushing more of the snake into the drain until you feel resistance. Rotate the snake against the blockage until you feel it feed freely into the pipe.
Can a drain snake break a pipe?
Drain Snakes Can Damage Pipes While billed as devices that are easy to use by anyone and everyone, drain snakes can be hard to manage, and if used improperly, can damage pipes. Old pipes in many homes are galvanized, or coated in zinc, which was done to prevent the pipe from rusting or corroding.
How do you unclog a drain with a snake?
Pour 3/4 of a gallon of cold water into a mop bucket, and then add 3 cups of caustic soda. Stir the mixture well, and it will soon begin to fizz. Next, pour it into the clogged drain and leave for 20-30 minutes, then flush it with pure hot water – repeat as necessary.
How do you get a snake past the bend in the pipe?
The proper way to use a snake is to insert the head into the drain and push very slowly without cranking. If you try to force it, it can bend back on itself and actually come out of the drain. Push gently and slowly, and if the auger is the right one for the job, it should slide smoothly through the pipe.
How do you unclog a drain if a snake doesn’t work?
If the auger still doesn`t work, call a plumber. If you can`t remove an obstruction in a sink drain by using an auger inserted into the drain, tackle the clog through the U-shaped trap under the sink.
Can you snake your own drain?
For smaller clogs, snaking your own drain is possible. Routine, minor sink clogs from hairballs or food remnants are typically located in the U-shaped trap directly below the sink or only a few feet deeper in the drainpipe. They may be cleared by using a light-gauge, hand-operated auger.
How do plumbers unclog drains?
The plumber inserts the hose deep down into the drain, and then high-pressure water blasts out the nozzle to clean out all parts of the drain. The pressure is enough to completely wash away all debris clinging to the drainpipe walls, making it hard for debris to build up again.
Can a drain snake break a PVC pipe?
If the bottom of the pipe or fittings are missing this can cause the snake to catch and break the pipe. It can also cause the equipment to get stuck. Broken PVC pipe is another issue with drains. If PVC is installed correctly there is usually no issues.
Will a plumbing snake go through a toilet?
A drain toilet snake is a long wire coil with a corkscrew-like tip that you feed into your pipes until it encounters the clog. Even the least expensive toilet snake will clear a toilet. A toilet snake can also be used on clogged bathroom sinks.
Can you use a snake on PVC pipe?
PVC pipes are an improvement over cast-iron pipes, because they have smooth walls that don’t allow debris to cling, so if you have to clear a clogged drain deep in the pipe, you can usually do it with a plunger or drain snake.
How do you know if your main line is clogged?
Signs Your Sewer Line May Be Clogged Dark Water. One of the signature symptoms of a main-drain clog is water backing up in your tubs or showers. Slow-Moving Drains. Take a minute to think about the drains in your home. Gurgling Sounds. Clogged Plumbing Fixtures. Turn Off the Water. Call a Plumber.
How do you drain a snake at home?
A drain snake is available at your local hardware store. You can also make your own drain snake at home with a pipe cleaner or a wire hanger. Cut a 2-liter bottle into a spiral with “teeth” in it, which is a very effective and cheap alternative to store bought drain snakes.
How do you unclog a severely clogged drain?
Simply pour some hot water down your clogged drain and follow it up with equal parts baking soda and vinegar (baking soda first), cover the drain with a plug if you have one, let it sit for 20-30 minutes, then follow it up with more hot water to clear the clog.
Why cant I get my snake down the drain?
If you’re using a drain snake and it won’t go down the drain, don’t force it. Call a plumber near you. Wrong size drain snake – If the drain snake you’re using won’t fit down the drain, then you may be using the wrong kind of drain snake. For general drain clogs, a small drum auger will generally do the trick.
How do you unclog a 90 degree pipe?
Snake the piping with a bent hanger for close-by clogs. If the clog isn’t too far down the pipe, a hanger might work! Find a wire coat hanger, straighten it out, and bend the tip to a 90-degree angle using a pair of pliers. The length of the hook should be small enough to fit through the drain.
