Table of Contents
How do you snake a drain with a manual auger?
Instructions For Using A Drain Auger At Home: Step One: Insert the drain auger into the drain or toilet. Step Two: Turn the handle of the drain snake clockwise and slowly push. Step Three: When you’ve found the blockage with the drain auger, pull it out without rotating the drain.
What is the difference between a drain snake and an auger?
Drain snakes work for smaller drains like your kitchen or bathroom sink. Drain augers tackle larger pipes like your toilet or shower drain. The snake covers lines from 1-1/4″ – 2″ range, and you’ll use an auger for lines in the 1-1/2″ – 3″ range.
How do you get a drain snake past a trap?
The proper way to use a snake is to insert the head into the drain and push very slowly without cranking. If you try to force it, it can bend back on itself and actually come out of the drain. Push gently and slowly, and if the auger is the right one for the job, it should slide smoothly through the pipe.
How do you unclog a drain if a snake doesn’t work?
If the auger still doesn`t work, call a plumber. If you can`t remove an obstruction in a sink drain by using an auger inserted into the drain, tackle the clog through the U-shaped trap under the sink.
Can a drain snake break a pipe?
Drain Snakes Can Damage Pipes While billed as devices that are easy to use by anyone and everyone, drain snakes can be hard to manage, and if used improperly, can damage pipes. Old pipes in many homes are galvanized, or coated in zinc, which was done to prevent the pipe from rusting or corroding.
What does a drain auger look like?
A plumbing auger or plumbing snake is a long, flexible metal cable with a small, uncoiled spring on one end and a handle on the other. The auger head on the snake looks like a corkscrew. Home plumber’s snakes are usually around 50 feet long. The cable coils up when you’re not using it.
How do I get auger past a corner?
How to Get Past Corners With Drain Augers Place the cable of the drain auger at the beginning of the drain opening. Turn the handle for the drain auger clockwise to start the cable through the drain. Pull the cable back a little when you reach a corner by turning the handle counterclockwise.
Can’t get snake past trap tub?
So, why won’t your drain snake go down the bathtub drain? The answer may be that you are either using the wrong kind of drain snake, or you are trying to force it through a P-trap, or you are forcing the snake cable through the pipe too quickly or the clog is just too darn big.
How long of a drain auger do I need?
Because they are designed for the toughest of clogs, the cable should be no smaller than 5/8 inch in size, with a minimum length of 75 to 100 feet in length. This snake is designed to clean out drains that are 3 inches or larger, which typically includes clean outs to the street.
How do you make a snake drain?
A drain snake is available at your local hardware store. You can also make your own drain snake at home with a pipe cleaner or a wire hanger. Cut a 2-liter bottle into a spiral with “teeth” in it, which is a very effective and cheap alternative to store bought drain snakes.
Should I snake my own drain?
Leave sewer line blocks to the pros. Professional plumbing augers are more powerful, but even so, snakes don’t clean the drain. While a snake may dislodge the clog and resolve the immediate problem, accumulating sludge coating the wall of the pipe means clogging will likely recur.
How do you know if your main line is clogged?
Signs Your Sewer Line May Be Clogged Dark Water. One of the signature symptoms of a main-drain clog is water backing up in your tubs or showers. Slow-Moving Drains. Take a minute to think about the drains in your home. Gurgling Sounds. Clogged Plumbing Fixtures. Turn Off the Water. Call a Plumber.
How do you unclog a deep clogged?
How To Unclog a Drain With a Clog Deep in the Line Remove the drain cap. Push the auger down into the drain and begin turning the auger handle clockwise as it goes. Push the auger firmly into the clog when you encounter it in the drain pipe. Pull the auger back to break apart the clog, then push it forward again.
What does snaking a toilet do?
To clear a clog in your toilet without a plunger, or if plunging hasn’t worked, a toilet snake can help you return to a functioning flush (sigh of relief). To get started, put on a pair of rubber gloves and make sure you’ve located the water supply in case you need to quickly restrict the water flow.
