Table of Contents
Can you use a snake on a kitchen sink?
You can simply unclog your blocked kitchen sink using simple tools. You’ll only need a plumber’s snake and a plunger to get the job done. These two tools can clear most drain clogs.
What is the best way to unclog a kitchen sink?
Pour one cup of fresh baking soda down the drain, followed by one cup of white vinegar. Place a rubber stopper or other sink hole cover over the drain opening. Wait 15 minutes to allow the vinegar and baking soda to unclog your drain, Then take out the drain cover and run hot tap water down the drain to clear the clog.
How do you use a drain snake effectively?
Steps for using a drain auger Push the end of the snake into the drain opening and turn the handle on the drum that contains the coiled-up snake. Keep pushing more of the snake into the drain until you feel resistance. Rotate the snake against the blockage until you feel it feed freely into the pipe.
Should I snake my own drain?
Leave sewer line blocks to the pros. Professional plumbing augers are more powerful, but even so, snakes don’t clean the drain. While a snake may dislodge the clog and resolve the immediate problem, accumulating sludge coating the wall of the pipe means clogging will likely recur.
How do you get a snake out of a drain trap?
The proper way to use a snake is to insert the head into the drain and push very slowly without cranking. If you try to force it, it can bend back on itself and actually come out of the drain. Push gently and slowly, and if the auger is the right one for the job, it should slide smoothly through the pipe.
How do you unclog a drain if a snake doesn’t work?
If the auger still doesn`t work, call a plumber. If you can`t remove an obstruction in a sink drain by using an auger inserted into the drain, tackle the clog through the U-shaped trap under the sink. Set a bucket under the trap.
Can a drain snake break a pipe?
Drain Snakes Can Damage Pipes While billed as devices that are easy to use by anyone and everyone, drain snakes can be hard to manage, and if used improperly, can damage pipes. Old pipes in many homes are galvanized, or coated in zinc, which was done to prevent the pipe from rusting or corroding.
Why is my drain still clogged?
Most bathroom drain clogs result when dirt, skin flakes, and especially hair binds to soap scum on the walls of drain pipes. Over time, this gunk accumulates and reduces water flow. Troubleshooting: Remove and clean the drain stopper. If that doesn’t work, remove the drain elbow joint and clean it out.
Why is water backing up in my kitchen sink?
When you use the kitchen sink frequently, it is inevitable that food, gunk, grease, and hair get washed down the drain. Some of this debris will pass through the pipes without obstruction, but other bits and pieces could also get stuck. This will cause the water to back up in the kitchen sink.
Why is my kitchen sink filling up with water?
Possible Cause: Clogged Sink A clog in the sink itself is one of the more common reasons for water to back up. Using sink cleaners and snakes in the drain can often unclog the sink drain. You can also schedule a professional drain cleaning to see if you can unclog the sink drain.
Can plunging make a clog worse?
Take the plunger and position it directly over the drain and firmly plunge down and up several times. Too much pressure can damage the drain line connection and ruin the trap. DO use a plumber’s snake if plunging didn’t work. When you encounter resistance, you’ve found the clog.
What is the difference between a snake and an auger?
Drain snakes work for smaller drains like your kitchen or bathroom sink. Drain augers tackle larger pipes like your toilet or shower drain. The snake covers lines from 1-1/4″ – 2″ range, and you’ll use an auger for lines in the 1-1/2″ – 3″ range.
How do plumbers unclog drains?
The plumber inserts the hose deep down into the drain, and then high-pressure water blasts out the nozzle to clean out all parts of the drain. The pressure is enough to completely wash away all debris clinging to the drainpipe walls, making it hard for debris to build up again.
Can you snake main drain?
A main sewer line can be snaked with a professional drain snaking machine using a heavy duty cable and motor to push through the blockage. Main sewer snaking can be done through a ground level accessible cleanout, a roof vent, or by pulling the toilet and snaking through the flange.
Can a drain snake break a PVC pipe?
If the bottom of the pipe or fittings are missing this can cause the snake to catch and break the pipe. It can also cause the equipment to get stuck. Broken PVC pipe is another issue with drains. If PVC is installed correctly there is usually no issues.
How long should a drain snake be?
Because they are designed for the toughest of clogs, the cable should be no smaller than 5/8 inch in size, with a minimum length of 75 to 100 feet in length.
How do you unclog a severely clogged drain?
Simply pour some hot water down your clogged drain and follow it up with equal parts baking soda and vinegar (baking soda first), cover the drain with a plug if you have one, let it sit for 20-30 minutes, then follow it up with more hot water to clear the clog.
