QA

Quick Answer: How To Use 9H Ceramic Coating

Completely moisten the cloth with 9H Ceramics Coating. Apply the finish swiftly and evenly by wiping (always in one direction). We recommend that you use a protective mask (e.g. 3M) during application as the liquid has a strong odour. Wearing protective gloves is also recommended.

How long do you leave ceramic coating on?

3 days to fully cure – It takes just 3 days for the coating to fully harden and reach 9h hardness but once complete your car or vehicle’s surfaces will be protected for 2 years.

How hard is 9H ceramic coating?

Essentially, a 9H-rated nano ceramic coating has the ability to resist the scratching strength of a 9H pencil, the sharpest and hardest pencil on the planet.

Can you do ceramic coating yourself?

Yes, you have read it right! You can apply Nano Ceramic Coating to your car in your home using the DIY technique. However, in order to do this job yourself, you should be well aware of all the techniques or skills that are required for this procedure.

Do you wax a car before ceramic coating?

In this article you will learn: Ceramic coatings are one of the most durable and long-lasting protectants for your car’s paint. In fact, unless your goal is to strip off an old layer of ceramic coating, you should use a car wax and polish only before you apply a ceramic coating or paint sealant.

How long after ceramic coating can I wash car?

The golden rule you should always stick to after a ceramic coating is Do not wash your car within 7 days of application! If you know the basic properties of these types of products, you will know that once they are applied they will begin to cure and harden.

What if it rains after ceramic coating?

If it’s rain water or tap water, the impurities present in both will destabilize the cross link bonds before they can fully form. That can lead to premature coating failure in many instances. That’s why washes and driving in the rain are not recommended during the first week after application.

Why ceramic coating is bad?

Ceramic coatings can’t damage your paint, regardless of what you do. However, improper application can leave streaks, high spots, hazing, and horrible reflections. So you’d better know what you’re doing, because once this thing sets, it cements over your paint for the next couple of years.

How hard is 9H hardness?

9h refers to the Moh scale of mineral hardness. Friedrich Mohs invented this scale in 1812, and it ranges from 1 to 10 with glass around 5 and diamond at the top of the scale.What is 9h hardness? Mineral Hardness Diamond 10.

What is the hardness of ceramic coating?

The current clear lacquer of a car have a hardness of between 1 and 4 on mohs’ scale. Ceramic coatings claim to improve this hardness to 9H.

What is the hardest ceramic coating?

Ceramic Pro once cured, is measured to have hardness above 9H. Normal clear coat has hardness between 2H and 4H. The increase in the hardness of the coated surface is vast. This makes it the hardest paint coating on the market today.

Is DIY ceramic coating worth it?

In many cases, ceramic coating your paint is absolutely worth the price. It provides great protection against contaminants and minor scratches, all while making the vehicle much easier to clean up. Coatings aren’t for every car or owner though. It really comes down to how you use and care for it.

Is ceramic coating easy to apply?

With Consumer-Grade Ceramic Coating widely available, the actual application process is relatively easy. That said, it’s not necessarily simple. Before you can even apply Ceramic Coating, the surface has to be free of surface blemishes, which applies to even brand new vehicles.

Why is ceramic coating so expensive?

As ceramic coatings work for longer years compared to its alternatives, it costs more. It requires high-quality products and uses advanced technology; a layer of ceramic coating is worth thousands of dollars.

Can a ceramic coating be applied over wax?

Ceramic coatings should not be applied over or underneath waxes. Applying a ceramic coating over a wax will prevent it bonding to the paint and negatively impact the durability and finish. Apply a wax over a coating will hinder the performance of the ceramic coating.

Does ceramic coating replace wax?

It is typically assumed that a nano ceramic coating is a replacement for traditional wax. Although a coating will last about 10 times longer than traditional carnauba wax, it’s not necessarily a replacement. It is, however, a superior option for protecting the substrate or surface where it is applied.

How do I prepare my new car for ceramic coating?

How Do I Prep For A Ceramic Coating? STEP 1: WASH. Start off by properly washing your vehicle. STEP 2: CLAY. Once the surface is clean, it is important to clay the paint to remove any surface contamination that washing may not have been able to remove. STEP 3: POLISH. STEP 4: WIPE.

Can you go through a car wash with ceramic coating?

Ceramic-coated cars should not be driven through an automatic car wash. Most automatic car washes use recycled water and unmaintained brushes. The friction of the unmaintained brushes scrubs dirt over the coating, damaging it in the process. Ceramic-coated cars should be maintained by hand washing.

When can ceramic coating get wet?

12-24 hours after your vehicle was coated it can be exposed to water. If wet before that time water should be blown off or safely wiped off before it dries on the surface.

What Car Wash is safe for ceramic coating?

A ceramic coating should be washed with an automotive specific shampoo, that is pH neutral, contains no wax, and is ultra-suds producing. Most detergents (like dish soap) are high alkaline or +9 on the pH scale. This can leave a film on top of the coating if not completely rinsed off – or if it dries too quickly.

Will ceramic coating cure in cold weather?

If the ambient temperature around your vehicle is off, the ceramic material simply won’t cure and harden the way it should – if it cures at all! Some will tell you that any temperatures lower than 56°F is really pushing things, and as soon as you start to get into the 40° range you are wasting your time.

Can I cover my car after ceramic coating?

I wouldn’t cover it for the first couple weeks until the coating fully cures. Also, never cover a dirty car, coated or not, you will scratch the crap out of it.