Table of Contents
Press and hold the Control Lock Key for 3 seconds to unlock the machine. You will notice the machine count down from 3-2-1. The control lock may be a stand alone key, or it could be a dual function key paired with another button like Extra Rinse, Steam, etc.
How do you unlock a dryer control?
Press and hold the Extended Tumble and – (minus) buttons for 3 seconds. The control lock icon will flash while locking/unlocking, stay on when locked, and turn off when unlocked. NOTE: The Power button can still be used when the machine is locked.
Why does my Whirlpool dryer says Loc?
The Loc or Lc (Lock) error code indicates that The Control Lock is enabled. Touch and hold CONTROL LOCK for 3 seconds to unlock the controls of the dryer. During this time the LED Display will count down 3-2-1. When the Control Lock is disabled, the LED Display will clear.
How do you unlock a Whirlpool control lock?
When you are ready to resume use of the washer, you must first unlock the control panel. Locate the “Control Lock/Unlock” button on your Duet’s control panel. Press and hold the “Control Lock/Unlock” button for three seconds. Release the “Control Lock/Unlock” button when the control lock icon on the display disappears.
Why does my dryer have a lock symbol?
A padlock being displayed is to highlight that the “Child lock” function has been activated. When the child lock is engaged it will stop you from performing any action apart from turning the appliance on or off via the button/control dial. Usually, the child lock buttons will be highlighted on the control panel.
How do I turn off the LOC on my Whirlpool washer?
Press the button for that dedicated key to activate and deactivate the Control Lock. To turn off Control Lock, press and hold the Options key that says “Control Lock Hold 3 Sec” under it for 3 seconds.
How do I clear the LOC on my Whirlpool oven?
Press CANCEL/OFF to reset the latch. Wait 20-30 seconds before trying to open the door. Turn the oven’s power off at the circuit breaker, turning it back on after 1 minute. The latch should be unlocked.
How do you manually unlock a Whirlpool washer?
Hold down the “Control Lock” button on your Whirlpool washer for three seconds at the end of the washing cycle. Listen, and when you hear the unlatching sound, the door should open.
What does control locked mean on a Whirlpool washer?
When activated, the Control Lock feature on Front Load Washers can prevent selections from being made. After a cycle has begun, the controls can be locked or unlocked. Children can’t accidentally start the washer by touching the pads.
How do you manually unlock a front load washer?
How to Manually Open the Door Turn off and unplug the washer/dryer. Close the water faucet. Wait until the drum has stopped rotating – never open the door while the drum is in motion. Wait until water and laundry have cooled down when washing with high temperatures.
How do you unlock the Control key?
Try pressing the Ctrl key on the right side of the keyboard for a long time and release it later. Try pressing the Ctrl key on the left side of the keyboard for a long time and then release it. If this didn’t work, try the same with Shift keys.
How do I fix the Control Lock on my Whirlpool Duet dryer?
The Easy Fix Locate the “End of Cycle Signal” button. This is located on the right side of the Duet model dryer. Push the button and hold it down for 3 seconds. The Control Lock LED should turn off letting you know that your dryer is no longer locked.
How do I unlock my Whirlpool front load washer?
Press the “Drain and Spin” button on the washer’s control panel to attempt to unlock the machine. This may drain any excess water that could cause the machine to remain locked. Once the “Drain and Spin” cycle completes, the door should unlock.
How do I turn off the control lock on my GE washer?
To lock or unlock the washer controls: Press and hold the LOCK button for 3 seconds. A sound is made to indicate the lock/unlock status. The control lock icon on the display will light up when the feature is on.
What does loc mean on Whirlpool range?
LOC means the control panel is locked. Per the Use and Care Guide: 1. Check that the oven and cooktop are off. 2. Press and hold CONTROL LOCK for 3 seconds.
How do you unlock the touchscreen on a Whirlpool oven?
How do you gain access to the controls on an oven? Press and hold on to the lock for 3 seconds to lock the control panel. The light above the lock will turn on. Press and hold LOCK for 3 seconds to open the control panel.
What does E2 F3 mean on Whirlpool?
An E0-F3 error indicates that the oven’s temperature sensor is open; E1-F3, that the temperature sensor is shorted; E2-F3, that the oven temperature has exceeded the maximum rated 575 degrees Fahrenheit in “Cook” mode; and E3-F3, that the oven temperature has exceeded the maximum rated 950 degrees Fahrenheit in “Clean” Sep 26, 2017.
How do you open the door on a Whirlpool mid cycle?
Press the “Start/Pause” button on the front of your washing machine and wait a few minutes for the washer to safely drain away water in the drum before it unlocks the door. Once this is done, you’ll be able to open the door and add/remove items or make chances to the cycle.
Is there a way to reset a Whirlpool washer?
Rotate your dial until you have the following three lights illuminated: RINSE, WASH, and STOP. Then turn off your washer and unplug it for ten seconds. When you turn it back on it should be reset.
How do you force a washing machine to unlock?
Turn the washing machine off and unplug it. If pausing the cycle doesn’t unlock the door, turn the machine off. Then, unplug the machine and wait 5-10 minutes. Try pulling the handle again to see if the door opens. This is the most common solution for top loaders.
