Table of Contents
Door is locked when starting or using the oven Turn the power off at the circuit breaker or fuse box for one minute, then turn the power back on. Allow the oven to cool, approximately 30-90 minutes, move the latch arm to the left to unlock the door.
How do I get my oven out of lock mode?
Oven Randomly Locks If you try to use your oven and find it locked, press the “clear” or “reset” button to stop the oven and turn it off. Wait a minute or two and then try to open it again. If it’s still locked, start an oven cleaning cycle. Allow the cleaning cycle to run for about 60 seconds and then cancel it.
Why does my Maytag oven says lock?
When you place the Maytag oven into self clean mode, the oven door will lock to prevent the door from accidentally being open during cleaning. This is due to the fact that during the cleaning cycle, the oven reaches temperatures far above normal cooking.
How do I unlock my oven door?
To unlock an oven, hold down the Lock button on your control panel for 2 or 3 seconds and wait for the oven to beep to indicate it’s unlocked. If this doesn’t work, unplug it from the electrical outlet and wait a few minutes. Then, plug it back in again, which may reset the temperature gauge and cause it to unlock.
How do I reset my Maytag oven?
Reset power to the product: Power unit down by turning off the circuit breaker(s) for one (1) minute. Power unit up by turning on the circuit breaker(s). Start a bake cycle. Monitor the oven for one (1) minute to ensure the error code does not display again. Verify oven operation.
Why did my oven locked itself?
When an oven is in a self-cleaning cycle it turns up to a very high heat temperature. This is to make sure all the extra dirt and food debris burn off. To prevent any injuries during this period, your oven will automatically lock itself so that no one can open it and get exposed to extreme heat.
How do I turn off my self cleaning Maytag oven?
If power was interrupted during a Self-Clean cycle, and the cycle did not resume, select the “Self Clean” option, then select “Cancel”. Wait a couple of minutes then try to start the cycle again. If the oven clean cycle was started by mistake: Press Cancel/Off key.
How do you lock a Maytag oven door?
How to Lock Maytag Oven Doors Locate the “Cancel” and “Cook & Hold” buttons on the oven’s control panel. Hold down “Cancel” then hold “Cook & Hold” with another finger for three seconds. Wait three seconds; the display will change from “OFF” to “LOCK” and the door will seal. Repeat these instructions to unlock the door.
How do I stop my Maytag oven from self cleaning?
Press the Cancel button to stop the cleaning cycle if necessary. If the door has an automatic lock, it will remain locked until the oven has cooled. If the door has a manual lock, wait at least an hour and a half for the oven to cool before opening the door.
Why is my self-cleaning oven won’t unlock?
Once the oven has cooled after a Self-Clean cycle (approximately 30 to 90 minutes), slide the oven door latch over to the left. If your door won’t unlock, try turning those knobs back to Clean, then slide the latch over. Do not force the latch at anytime.
How long does it take for a self-cleaning oven to unlock?
After a self-cleaning cycle, the oven should open once it has completely cooled. Depending on the age and make of your oven, this can take anywhere from 30-90 minutes. In most cases, if your oven has an automatic lock, then it will also automatically unlock itself once the self-cleaning is finished.
How do I reset my Maytag oven control panel?
Make sure the Control Lock function is turned OFF. Some ovens may be equipped with Control Lock. Look for “Control Lock” on the oven control console, then reset by, typically, pushing & holding for 3 seconds.
How do I reset my oven control board?
But the first thing you should do is try to perform a hard reset by unplugging the oven, waiting about 30 seconds, and then plugging it back in again. In some cases, this will be enough to reset the control board and get your oven working again.
How do you reset an oven?
Turn the circuit breaker to the OFF position or remove the fuse. Wait one minute, then turn the circuit breaker back to the ON position or install the fuse to reset power to the unit. This should reset the electronic controls on the range or wall oven.
How do you use the cleaner on a Maytag oven?
Self-Clean Oven Instructions Step 1: Remove loose items and quickly wipe down the inside. Step 2: Run the Self-Clean Cycle. Step 3: Wait for the Cycle to Complete and Oven to Cool. Step 4: Wipe Out the Oven Cavity.
How do you unlock a Maytag microwave?
How to Unlock a Maytag Microwave Locate the “Enter/Start” button on the microwave’s control panel. Press and hold the “Enter/Start” button. Release the “Enter/Start” button after three seconds to unlock the control panel.
How do I fix F9 error on Maytag oven?
How to Remove the F9 Code From Maytag Hold on the “Start/Stop” button for 10 seconds. This will end the beeping. Open the oven door and check the door latch. Spray a little WD-40 onto a washcloth and scrub off any rust or debris on the latch. Press the oven door shut gently. Test the oven.
How do you turn on a Maytag oven?
located on the top left corner of the range. While the oven door is closed, press the oven light switch to turn the light on and off. The oven light will come on when the oven door is opened. The oven light will not come on during the Self-Clean cycle.