Table of Contents
After connecting the appliance to an electrical power supply or after a power failure, the control panel will be locked. An indicator light above the key icon will be on. To unlock the control panel, press and hold CONTROL LOCK for 3 seconds. The indicator light will turn off, and the appliance is ready for use.
How do I unlock my Jenn Air stove?
Turn the power off at the circuit breaker or fuse box for one minute, then turn the power back on. Allow the oven to cool, approximately 30-90 minutes, move the latch arm to the left to unlock the door.
How do you turn the Control Lock off on a Jenn Air stove?
Possible Solutions To turn off Control Lock, press and hold the button(s) designated for your model for 3 seconds. This will vary depending on your model number. Once held for 3 seconds, the lock indicator light will turn off. See your Owner’s Manual for your specific model.
How do I reset my Jenn Air cooktop?
Reset power to the product: Power unit down by turning off the circuit breaker(s) for one (1) minute. Power unit up by turning on the circuit breaker(s). Start a bake cycle. Monitor the oven for one (1) minute to ensure the error code does not display again. Verify oven operation.
What do I do if my oven door is locked?
If you try to use your oven and find it locked, press the “clear” or “reset” button to stop the oven and turn it off. Wait a minute or two and then try to open it again. If it’s still locked, start an oven cleaning cycle. Allow the cleaning cycle to run for about 60 seconds and then cancel it.
How do I unlock my touch stove?
Be sure nothing is sitting on cooktop surface. If surface is wet, dry surface and retry. To unlock it, hold the key symbol for 5 seconds, and the unit will beep twice. The key light will disappear, unlocking the unit.
How do I unlock my induction cooktop?
Unlocking The Induction Hob Long press the main power button for ten seconds at least. Release the button and attempt to switch on the hob. If the cooktop is unlocked already, you can switch it on.
How do I lock my Jenn Air stove?
To Lock Cooktop: Touch and hold the CONTROL LOCK keypad for 3 seconds. After 3 seconds, a tone will sound and the indicator light above the Control Lock keypad will light, indicating that the cooktop controls are in the lockout position.
How do you unlock the control lock on a Jenn Air dishwasher?
Press and hold the designated control lock button for your model for 3 seconds. The location of the control lock button may vary depending on your model. Refer to the Owner’s Manual for the control lock button location for your model. The light will turn off and the control will be unlocked.
How do I reset the control panel on my Jenn Air dishwasher?
To reset the dishwasher control panel, it needs to be disconnected from the power source for one minute. If your dishwasher is plugged into an outlet, simply unplug the unit for one minute and then plug the unit back in.
What does F1 mean on Jenn Air oven?
F1 – Defective Touch Pad or Control Board – Replace touch pad, control board (clock), or both if one assembly.
Why is my Jenn Air oven not working?
Check the electrical supply. Ensure the appliance is plugged into a grounded outlet with a dedicated circuit (240V receptacle for electric ranges, 120V receptacle for gas ranges and the outlet is operational. Also check to make sure the circuit breaker has not tripped or fuse has blown.
Why is my Jenn Air stove beeping?
If the cooktop is continuously beeping it means an object, liquid or soils is putting pressure on the control panel. If the cooktop continues beeping try resetting the cooktop: Power range down by turning off the circuit breaker(s) for one (1) minute.
How do you unlock an oven that is grounded?
To get the oven in Grounded, you have to explore the recently opened Haze Lab. With a gas mask equipped, make your way to the south part of the map where the Haze Lab is located. The BURG. L chip used to unlock the oven is found toward the end, but you’ll have to combat some bots and fungus first.
Why did my oven locked itself?
When an oven is in a self-cleaning cycle it turns up to a very high heat temperature. This is to make sure all the extra dirt and food debris burn off. To prevent any injuries during this period, your oven will automatically lock itself so that no one can open it and get exposed to extreme heat.
Why is my oven still locked after cleaning?
If the door will not unlock at the end of the clean cycle then you may have a problem with the oven temperature sensor. This may reset the control and allow you to unlock the door. If you still cannot unlock the door, then you can check the oven temperature sensor from the back.
Why is my self-cleaning oven won’t unlock?
Once the oven has cooled after a Self-Clean cycle (approximately 30 to 90 minutes), slide the oven door latch over to the left. If your door won’t unlock, try turning those knobs back to Clean, then slide the latch over. Do not force the latch at anytime.
How long does it take for an oven to unlock after self-cleaning?
After a self-cleaning cycle, the oven should open once it has completely cooled. Depending on the age and make of your oven, this can take anywhere from 30-90 minutes. In most cases, if your oven has an automatic lock, then it will also automatically unlock itself once the self-cleaning is finished.
How do I turn off my oven Control Lock?
Press and hold the Options key for 3 seconds to turn off Control Lock.
How do I turn off the Control Lock on my Whirlpool stove?
Press the button for that dedicated key to activate and deactivate the Control Lock. To turn off Control Lock, press and hold the Options key that says “Control Lock Hold 3 Sec” under it for 3 seconds.
How do I unlock a GE stove?
Take your wire hook, place it between the oven door and the rest of the oven, place it over the latch, and pull it (the latch is usually in the top center of the oven door). This should release the lock, and you’ll be able to open the oven door.
How do I unlock my stove domain?
Be sure nothing is sitting on cooktop surface. If surface is wet, dry surface and retry. To unlock it, hold the key symbol for 5 seconds, and the unit will beep twice. The key light will disappear, unlocking the unit.
How do you reset a stove top?
Turn the circuit breaker to the OFF position or remove the fuse. Wait one minute, then turn the circuit breaker back to the ON position or install the fuse to reset power to the unit. This should reset the electronic controls on the range or wall oven.
What is control lockout on an electric range?
The Gas/Control Lockout feature disables the cooktop, locking out the control so that pressing the pads does not activate the controls. Gas flow is stopped to both the cooktop and the oven.
How do I unlock my electric oven?
To unlock an oven, hold down the Lock button on your control panel for 2 or 3 seconds and wait for the oven to beep to indicate it’s unlocked. If this doesn’t work, unplug it from the electrical outlet and wait a few minutes. Then, plug it back in again, which may reset the temperature gauge and cause it to unlock.
Why is my induction stove blinking?
If the burner control is blinking, the cooktop is not sensing the cookware. Make sure cookware is placed on the burner element and cookware is induction compatible. Refer to Induction Cooktop Cookware Suggestions for more information.
