Table of Contents
Dial 1-800-537-5140 to connect with GM’s toll-free radio hotline. Once you’re connected, you’ll be asked to provide your vehicle’s radio identification number, along with a special dealer access code. You’ll then be rewarded with a 4-digit retrieval code, which will allow you to unlock your radio.
How do I unlock my RDS radio?
To unlock radio you will need access to a GM scan tool. The radio must be in LOC mode NOT in INOP mode. Turn the ignition ON (The radio displays LOC). Press and hold presets buttons 2 & 3 or 1 & 4 for approximately 10 seconds.
How do you reset theft lock on a GM radio?
Step 1: Start the vehicle and turn on the radio. The radio will display “LOC” indicating the Theftlock system is activated. Step 2: Press and hold preset buttons 1 and 4 for ten seconds. (If you don’t have a fourth preset button, press and hold presets 2 and 3.).
How do you unlock a GM RDS radio with Theftlock?
Dial 1-800-537-5140 to connect with GM’s toll-free radio hotline. Once you’re connected, you’ll be asked to provide your vehicle’s radio identification number, along with a special dealer access code. You’ll then be rewarded with a 4-digit retrieval code, which will allow you to unlock your radio.
Why is my radio locked?
Your radio likely locked you out because a factory-enabled security system – one designed for anti-theft has been triggered. This system is designed to lock out car radio theft from accessing your audio system, but unfortunately, this feature can also lock out the car owner.
How do I get my car out of anti theft mode?
Step 1: Insert the key into the door lock. Use the side door on the driver’s side and the physical key even if there is a keyless entry system on the car. Step 2: Turn the vehicle key to unlock the car door without releasing it. Hold the key for 30 seconds in the position.
How can I get the code to unlock my car stereo?
How to Find the Radio Code to Unlock a Car Stereo Check Your Owner’s Manual. The best place to locate a radio code is in the owner’s manual of your car. Visit the Manufacturer’s Website. Visit your Local Dealership. Contact a Local Automotive Audio Installation Center.
How do I unlock my Chevy utility radio?
HOW TO UNLOCK RADIO CODES WITHOUT AN ANTI-THEFT CARD Get in touch with your vehicle’s manufacturer ASAP. You’ll find the number in the owner’s manual or on the Chevrolet website. Enter your vehicle’s code to unlock the stereo. Once the code unlocks the stereo, you can activate it and adjust the settings accordingly!.
How do I reset my car radio without the code?
Steps to Reset a Car Radio Without Code Search for the Radio Reset Code in the Owner’s Manual. Search for the Radio Reset Code at the Website of the Manufacturer. Get Help From the Customer Care Department. Go to the Dealership Near You. Contact a Car Radio Repair Center.
How do I unlock my 2013 GM radio?
To unlock the radio in the 2013 Chevy Silverado You will start by turning on the vehicle. You will see the display indication “LOC” which is telling You the theftlock system is activated. Now press and hold the reset buttons 1 and 4 for ten seconds or 2 and 3 if You radio does not have a fourth preset button.
How do I reset my GM radio?
Just follow the steps below: Navigate to your GMC IntelliLink home screen and click on ‘Settings. Select ‘Return to Factory Settings. You’ll be offered three options: Restore Vehicle Settings, Clear All Private Data, or Restore Radio Settings. When prompted to either Continue or Cancel, click ‘Continue.
What happened Delco Electronics?
Although Delco Electronics no longer exists as an operating company, GM still retains rights to the Delco name and uses it for some of its subsidiaries including the ACDelco parts division.
How do I turn off Theftlock on my GM radio?
To disable the Theftlock feature, enter the user or factory back-up code as follows: Write down the user or factory back-up code. Turn the ignition to ACCESSORY or RUN. Turn the radio OFF. Press the 1 and 4 buttons together. Press the Minute button and “000” will appear on the display.
Can I get radio code from VIN number?
If the manufacturer that built your vehicle offers online code lookup, you typically enter your VIN, the serial number of the radio, and contact information, including phone number and email. The code may be emailed to you for your records.
How do I reset my radio after changing the battery?
Syncing the Radio Turn the ignition key to the “On” position, but don’t start the engine. Turn the radio on by pressing in on the volume control knob. After 10 seconds, turn the radio off. Press and hold the power button for two to five seconds and watch the radio display.
How do I reset my Chevy anti-theft system?
How Do I Reset Anti-Theft System: Chevy Silverado? Insert ignition key. Turn it to the on position. Attempt to start the engine. Leave the key in that position until the security light stops flashing. Once the light goes off, switch the ignition key to off. Wait about five seconds. Try to start the engine again.
Why did my car go into anti-theft mode?
The anti-theft system of your car may not work properly at a certain time. This may be for many reasons, including a dead car battery that loses memory of your key or a dead remote control battery. It may also be that the immobilizer chip is damaged on your key or the car door lock is damaged.
