Table of Contents
How do you gain access to the controls on an oven? Press and hold on to the lock for 3 seconds to lock the control panel. The light above the lock will turn on. Press and hold LOCK for 3 seconds to open the control panel.
How do I turn off the Control Lock on my Whirlpool oven?
To turn the control lock setting off, press and hold the START button for 3 seconds. If this doesn’t work, turn the oven off at the circuit breaker for 1 minute. When the circuit breaker is turned back on, the error code should be gone.
How do you unlock oven controls?
To unlock an oven, hold down the Lock button on your control panel for 2 or 3 seconds and wait for the oven to beep to indicate it’s unlocked. If this doesn’t work, unplug it from the electrical outlet and wait a few minutes. Then, plug it back in again, which may reset the temperature gauge and cause it to unlock.
What does Control Lock mean on Whirlpool oven?
The lock feature shuts down the control pads (buttons) and locks the oven door to avoid unintended use of the oven. The lock feature is preset unlocked, but can be locked. If the oven is currently in use, the controls and oven door cannot be locked.
Why did my oven locked itself?
When an oven is in a self-cleaning cycle it turns up to a very high heat temperature. This is to make sure all the extra dirt and food debris burn off. To prevent any injuries during this period, your oven will automatically lock itself so that no one can open it and get exposed to extreme heat.
How do I remove the Control Lock on my oven?
Press the button for that dedicated key to activate and deactivate the Control Lock. To turn off Control Lock, press and hold the Options key that says “Control Lock Hold 3 Sec” under it for 3 seconds.
How do I reset my Whirlpool oven?
Reset power to the product: Power unit down by turning off the circuit breaker(s) for one (1) minute. Power unit up by turning on the circuit breaker(s). Start a bake cycle. Monitor the oven for one (1) minute to ensure the error code does not display again. Verify oven operation.
How do you unlock an oven that is grounded?
To get the oven in Grounded, you have to explore the recently opened Haze Lab. With a gas mask equipped, make your way to the south part of the map where the Haze Lab is located. The BURG. L chip used to unlock the oven is found toward the end, but you’ll have to combat some bots and fungus first.
How do I manually unlock my Whirlpool oven door?
Possible Solutions Press Cancel/Off key to start a latch reset, wait 20-30 seconds and open door. Turn the power off at the circuit breaker or fuse box for one minute, then turn the power back on. Allow the oven to cool, approximately 30-90 minutes, move the latch arm to the left to unlock the door.
How do you reset an oven?
Turn the circuit breaker to the OFF position or remove the fuse. Wait one minute, then turn the circuit breaker back to the ON position or install the fuse to reset power to the unit. This should reset the electronic controls on the range or wall oven.
How do you unlock the Control key?
Try pressing the Ctrl key on the right side of the keyboard for a long time and release it later. Try pressing the Ctrl key on the left side of the keyboard for a long time and then release it. If this didn’t work, try the same with Shift keys.
How do you unlock the Control Lock on a Kitchenaid oven?
To unlock the control panel, press and hold CONTROL LOCK for 3 seconds. The indicator light will turn off, and the appliance is ready for use.
How do I turn off the Control Lock on my Whirlpool dishwasher?
Using the Control Lock on Your Whirlpool Dishwasher To turn off Control Lock, press and hold the Options key that says “Control Lock Hold 3 Sec” under it for 3 seconds.
Is there a reset button on a Whirlpool oven?
Press the “Off/Clear’ button for three seconds to turn the “Control Locked” child lock off. Reset the cooking program if “Off/Clear” was pressed accidentally. For example, press the “Defrost” button again, and turn the dial to select the defrost time you want again.
How do you clear a Whirlpool oven code?
Plug the oven power cord back in or turn ON circuit breaker. Press CANCEL on the display. If fault code comes back after 1 minute then replace the keypad. If F2 E0 persists then replace the electronic oven control.
How do I reset the touchscreen on my Whirlpool oven?
Cycle Power Sometimes the appliance just needs to be rebooted or restarted. Power the appliance down by turning off the circuit breaker(s) or unplugging for one (1) minute. Power the appliance up by turning on the circuit breaker(s) or plugging back in. Verify the operation of the control panel/display.
What is the oven for in grounded?
The Oven is a production Utility that allows the player to smelt various Resources into other, more valuable resources such as globs, meals, and other sparse items.
How do you get advanced production buildings grounded?
Bring the BURG. L chip from the Haze Lab back to BURG. L. You will then be able to purchase the Advanced Production Buildings upgrade.
