Table of Contents
Unlocking from the inside of the door is done manually by turning the thumb turn. Locking and unlocking from the outside can be done automatically by an electric motor. As the last number of a correct code is pressed on the keypad, the electric motor swings into action and retracts the deadbolt.
Why is my Kwikset lock not unlocking?
Check that the bolt hole is at least 1” deep so the bolt fully extends. Check that the door closes properly so that when the deadbolt is extended, it is going into the bolt hole and not hitting the deadbolt strike or door frame. Check that the mounting screws securing the exterior keypad are not over-tightened.
How do you unlock a keypad lock?
If you want to break into a keypad door lock, you have only two options: use a bypass key or manually break the door’s seal. Since breaking the seal causes long-term damage and can be illegal, you must use a bypass key. If the door is secure or does not have a key slot, it may be impossible to bypass the keypad.
Why is my Kwikset keypad not working?
If your Kwikset keypad is dead, it may be playing possum. If the keypad is still dead, change the batteries and turn switch 3 to the on position to run a test. Press every key once and make sure it beeps. If some of your buttons still don’t respond, it’s time to call technical support for further testing.
Why is my Kwikset lock blinking orange?
What Do The Different Colored Lights On The Status LED Mean for my Premis Lock? Amber flashes mean it is locked, while green flashes mean it is unlocked, and red means low battery.
How do you open a Kwikset lock with a dead battery?
To open a Kwikset lock with a dead battery, unlock the smart lock with the appropriate key. As a last resort, you may also force open the deadbolt to access your home. After unlocking your door, take apart the Kwikset lock per the manufacturer’s instructions, and replace the batteries.
Why is my Kwikset Smart Lock not working?
As with all electronic devices that run on batteries, your Kwikset lock won’t work if the batteries are incorrectly installed. If not, remove the batteries and put them back in properly. More so, ensure you use the recommended batteries. Almost all Kwikset Smart Locks use AA alkaline batteries—non-rechargeable.
How do I reset my Kwikset lock code?
A factory reset will delete all codes associated with the lock. Make sure the door is open and unlocked. Press and hold the program button for 30 seconds using the SmartKey tool or a paper clip. You will hear one long beep. Press and release the program button. You will hear one short beep.
How do you unlock Kwikset privacy lock without key?
wire hangers, paperclips, bobby pins, ink cartridges, etc. To unlock a button-type privacy lock, take your tool (small screwdriver, paperclip, or other thin objects) and insert it into the hold as far as you can.
How do I unlock my Kwikset Halifax?
Both knobs/levers are locked or unlocked by push button inside. The outside knob/lever can be unlocked by an emergency key. The crisp, clean appearance of the satin nickel finish adds to the overall look of the product and brings a modern feel.
Why does my Kwikset lock beep and flash green?
If you hear 2 short beeps and 2 short green flashes, it means that correct user code entered to unlock door. If you hear 2 short beeps, it means that the turnpiece rotated to unlock position. If you hear 1 long beep, it means that the turnpiece rotated to locked position.
Why is my Kwikset lock beeping and flashing red?
Solid red = Door handing process did not work properly. Keypad flashes red with fast beeping sound* for 3 – 4 seconds. Door jammed while attempting to lock – Relock door. If needed, reposition strike.
What are the A and B buttons on my Kwikset lock?
The A and B buttons are for Z-Wave pairing (one to add the lock to your Z-Wave mesh, and one to remove it ).
What happens if Smart Lock dies?
Your Smart Lock will give you low-battery warnings for multiple weeks before it loses power. However, if your Smart Lock dies entirely before you can replace your batteries, your key will still work. This is the same deadbolt key that you’ve always used – the Smart Lock doesn’t change the key needed.
How do you remove a Kwikset deadbolt faceplate?
Position in a way that you are facing the deadbolt from the inside part of your house. Remove the thumb-turner latch. Pry the plate using a flat screwdriver. Unscrew the mounting screws. Open the door and remove the screws of the latch mechanism.
How do you open a stuck deadbolt lock?
How To Fix a Jammed Dead Bolt Lubricate the lock. Spray graphite into the lock. Tap the lock with a small hammer or the end of a screwdriver while you turn the key. This may free up the parts inside the lock and cause stuck parts to wiggle free. Take the lock apart. Open the door after the dead bolt is freed.
