Table of Contents
Where should under cabinet light strips be placed?
If you want to install under cabinet lighting as task lighting, you should place the strip lights closer to the middle front edge of the cabinets, so the countertop will be exposed to as much light as possible. For ambient or accent lighting, you may want to place them closer to the back edge.
Do under cabinet LED lights need a transformer?
When installing low voltage under cabinet lights, you will have to take some special measures. You’ll need a transformer to convert your home’s voltage supply to a much Page 11 11 lower number, and if you plan to use any accessories, like dimmers, they’ll need to be compatible with your lighting system.
How do you hide wires under cabinet lighting?
One of the simplest solutions to unsightly under-cabinet wires is using a cable protector. You can secure the wiring into one bundle with tie wraps and adhere it to the cabinet’s underside with staples. The wiring length itself should extend directly from the light to the wall.
Do under cabinet lights go in front or back?
When mounting any fixture under a cabinet, position it to the front. If there is a lens, face it toward the backsplash. The bottom-front rail of the cabinet should hide the fixture from your line of sight, whether you’re standing or seated. A plug-in fixture may be used for short runs of under-cabinet lighting.
Can you add under cabinet lighting?
Adding DIY kitchen under cabinet lighting (and above cabinet lighting) is an easy project that any DIYer can take on. It’s actually easier than you might think, and can be accomplished in about 30 minutes.
Can you hardwire LED Strip Lights?
When hardwiring the strips, you will just need to make solid connections between all your strip wires to the output wires on the power supply. This can be done with wire nuts or wiring all strips to a common positive and negative wire so you can make a one to one connection with the hardwired power supply.
How many lumens should under cabinet lights be?
For best results, use undercabinet LEDs that put out a minimum 400 lumens per foot; 500 lumens is even better, but harder to find.
How long do batteries last in under cabinet lighting?
The under cabinet lights operate on 3 AA batteries (18 AA batteries included) and have a run time of 100 hours. Our puck lights last 4 times longer than other battery operated lights. Keep your home lit longer with the longest lasting battery powered lights on the market.
Why can’t under cabinet lights be on a dimmer?
A 300 watt dimmer will be more than sufficient to power your under cabinet lights. Even if you have 12 fixtures at 10 watts each, that is only 120 total watts. This maximum watt capacity for a dimmer typically becomes an issue with recessed lighting where a large room may have a few dozen lights.
What kind of wire do you use for under cabinet lighting?
Although wire size ultimately depends on your light-fixture manufacturer’s specifications, 12-gauge wire is standard for most incandescent and fluorescent under-cabinet fixtures. A basic installation requires a 12-2 NM cable.
How can I hide my wires?
8 Genius Ways to Hide Every Wire in Your Home Hook Cords to the Back of Your Furniture. Corral Them Behind the Couch. Hide TV Wires in Plain Sight. Run TV Wires Behind the Wall. Tuck Cord Chaos Into Tubing. Slip Them Into a Drawer. Snake Them Through Baseboard Accessories. Stash Wires and Routers In “Books”.
What is the best color for under cabinet lighting?
Best Color for Under Cabinet Lighting 2700K is considered the same color as the classic incandescent light bulb. 3000K is slightly bluer and is similar to halogen bulb light color, but still has a warm, inviting yellow color to it.
Can you run Romex in cabinets?
The National Electrical Code requires that plastic-sheathed cable (commonly called Romex) be protected in areas where it’s subject to abuse. If you can run the plastic-sheathed cable high in the cabinets or behind drawers, you may not need conduit.
Can you leave LED light strips on all night?
Yes, LED lights are ideal for leaving on for long periods of time due to their low power usage and very low heat output. They are more suited to use as a night light/ background accent light in general. 23 of 25 found this helpful.
How do I hide LED strip lights in my kitchen?
Hide by plastic molding and wooden tray: For plastic molding, mold the corner edges of plastic to fit the LED light strip which gives the gap in between the strip run to ground. In the wooden tray case, cut the wooden tray according to the wall. Pre-drill the molds to avoid accidental drill while wall mounting.
Where should strip lights be placed in kitchen?
With task lighting your goal is to light your worktops, so if you were to install the lights towards the back, you are shining most of the light onto the splash back rather than the worktop itself.By installing the lights towards the front of the cabinet it will give the best spread of light, as wall cabinets are Oct 21, 2016.
Can you put LED strip lights above stove?
A narrow, aluminum strip of LED lights can easily be installed with magnets or screws over the stove. The lights can be permanently connected to a 120V AC power line or can be plugged in to a nearby wall outlet. Individual, circular under-cabinet LED lights can also be installed over the stove.
Are LED strip lights bright enough to light a room?
6. Are LED strip lights bright enough? This depends on where you want to use them, but you can expect your new LED strip lights to be just as bright as any other light source. They are also available with different lumen (brightness) values to give you greater flexibility.
