Table of Contents
Turn the gas regulator valve to the “pilot” position. If the water heater has a manual “ignite” button, press that to light the pilot. If it doesn’t have the button, or the button fails, press the regulator valve and hold a grill lighter or long match to the pilot light valve until the pilot ignites.
How do I turn my pilot light back on?
How to Relight a Pilot Light: 5 Steps Find the pilot light assembly and its reset switch. The furnace’s pilot light is usually positioned at the bottom of the unit by a knob. Set the reset switch to off. Turn the knob to the “Off” setting. Wait a moment. Relight the pilot light. Observe the furnace.
Is it safe to relight a pilot light?
But first, some words of caution: –Don’t relight the pilot light if there is a strong gas odor. Close the main gas shut-off valve for your house or for the appliance with the leak and call the gas company immediately. Get everyone out of the house until the problem is corrected by gas company technicians.
How do you light the pilot on a gas heater?
Once the gas has had time to dissipate, turn the knob to “Pilot.” Then, hold down the “Reset” button and bring the flame of a long lighter close to the pilot light opening. This should light the furnace pilot light. Once you are sure the pilot light is on, release your pressure on the reset button.
Why won’t my pilot light light on my furnace?
There are several possible reasons why your gas furnace pilot won’t light: an ongoing draft, a faulty thermocouple, an accumulation of dirt, or an inefficient supply.
How do pilot lights work?
A pilot light is a small flame that is kept lit in certain gas-fired appliances like your furnace, water heater, and gas fireplace. When you turn on your appliance, gas is released to the main burner and the pilot light ignites that gas to turn on your appliance and provide heat.
How much does it cost to relight a pilot light?
Most service providers will charge a standard fee per visit that typically covers the cost to relight a gas water heater. This service call price can range from $80 to $100.
Can a pilot light cause a fire?
When the appliance is turned on, a valve releases more gas, which is ignited by the pilot light. If this leak continues, its concentration may reach a point where a spark – such as that from a cigarette lighter, static electricity, or even the pilot light itself as it is re-lit – will cause a fire or even an explosion.
Do gas heaters have pilot lights?
If you have an older gas furnace, your heating unit relies on a little blue flame known as a pilot light to ensure ignition of the burners. Water heaters, gas fireplaces and old gas stoves also often have similar pilot lights. Pilot lights can develop problems that cause them to burn inefficiently.
How do I turn on my gas heater in my house?
How to Turn On a Wall Heater To turn on your gas heater, locate the knob for starting. Turn the knob to “Pilot,” and then push down on the “Ignite” button. Once the pilot light comes on, hold down the Ignite button for 10 to 15 seconds. Set the temperature on the wall heater to your desired heating level.
Why would pilot light go out?
Some of the possible serious reasons for pilot lights to go out include loose or broken gas valves, thermocouples or heat exchangers, faulty venting, low gas pressure, or high winds. If you believe there is a serious problem, don’t hesitate to contact a professional.
How do you reset the pilot light on a furnace?
Turn the knob to “Pilot” and hold down the “Reset” button. Using a long lighter, bring the flame close to the pilot opening. This should ignite the pilot light. Once the pilot is lit, you can release the reset button. The pilot should stay lit at this point.
Why is my gas heater not igniting?
One of the most common reasons for your gas heater not igniting or stopped working is because its thermostat is either off or not working properly. Therefore, make sure you check the thermostat, and if it is off, then turn it on while setting it on heat mode (5 degrees above your room temperature, at least).
Are pilot lights always on?
The little flame you see in your gas fireplace after you have turned it off is called a pilot light. A Standing Pilot Light runs constantly, whether your fireplace is on or off. Most of today’s gas direct vent fireplaces have an innovation called intermittent pilot ignition.
Does the pilot light go out when the gas is turned off?
Your pilot light relies on your natural gas to stay aflame, so if your gas is shut off, your pilot light will go out. Simply turn your gas back on and either relight your pilot light yourself or call a professional.
What’s a pilot light look like?
Inspecting a Gas Furnace Pilot Light Flame A natural gas flame should be a bright blue color with a small amount of yellow at the very tip. A propane flame will have more of a bluish-green flame with a tinge of yellow at the tip. The flame should strong enough to cover about 1/2 inch at the end of the thermocouple tip.
