Table of Contents
Turning It Off For fireplaces with a control panel, it’s as easy as turning the control knob to off. You should close or turn off the emergency gas valve. For those with a key valve, just insert the fireplace key into the slot and turn it until the valve closes. This cuts off the gas supply, and the pilot will go out.
How do you turn on a gas fireplace with a key and switch?
Lighting a Gas Fireplace With a Key Valve Place a long lighter next to the burner and pull the fuel trigger. (You can also use a lit match.) Turn the key in the slot to open the gas valve. You may hear the hiss of gas entering the burner. Replace the key cover. Use the key to control the height of the flames.
How do you turn on gas fireplace with Wall knob?
Igniting with a Fireplace Key Look over the user manual included with your fireplace. Remove your fireplace’s outer cover. Put a fireplace key into the device’s gas valve knob. Hold a long lighter up to the burner and ignite it. Turn the gas key. Replace the fireplace’s outer cover immediately.
How do you turn off a gas fireplace without the remote?
Usually there is a rocker switch that is located around your burner which, if in the “ON” position, it will override the remote. Turn the switch to “OFF.” There may be a wall switch that allows you to turn your burner on. Turn the switch to “OFF.” A slide switch on the receiver has been moved to the “ON” position.
Can you leave the pilot light on a gas fireplace?
Generally speaking, it is safe to leave your continuous pilot light on at all times, assuming it stays lit (more on this in a moment). While it does cost more to keep your pilot light on in between uses, it can actually have some benefits to your system.
Should I turn off the pilot light on my gas fireplace in the summer?
Your Utility Bill Perhaps the most important reason to turn off gas fireplace pilot light in summer is because of the money and energy you will be saving. If you leave the pilot light on during the summer it is simply sitting there burning gas, which is wasting gas and contributing to an exorbitant energy bill.
Do gas fireplaces have a switch?
What does the wall switch do for a gas fireplace? The wall switch of a gas fireplace works protects the gas valve from accidentally turning on. It is a safety measure associated with a pilot flame and a thermopile.
What are the two switches on a gas fireplace?
Question: There are two wall switches on the wall beside the gas fireplace. The top switch ignites the flame.
Where is the gas shut off valve for gas fireplace?
Gas fireplace: The shut-off for a gas fireplace is typically on the control panel. This control panel can be found behind the front screen, where a knob that controls the flow of gas can be turned to ‘off’.
How do I turn off the pilot light on my fireplace?
Turning off your pilot light is a simple process that will save you both energy and money. All you have to do is open the front of your fireplace, turn the Pilot knob to “off,” and then turn your gas shutoff valve to the “off” position as well.
Will gas leak if pilot light is off?
If the pilot light goes out on a storage or instantaneous hot water heater, space heater or a ducted heater, you will not have a gas leak. This is because all modern gas appliances with pilot lights have a fail-safe device that closes off the gas to the appliance in the case when the pilot may go out.
How much does it cost to keep the pilot light on a gas fireplace?
Running a pilot light for 1 hour costs about 1 cent (0.62 cent/hour for natural gas and 1.64 cent/hour for propane). Monthly costs of running a pilot light range from $4.49/month (natural gas) to $11.34/month (propane).
Is it OK to turn off pilot light?
A little heat is produced when your pilot light is on so turning it off in summer can help reduce the heat inside your home. The less heat there is, the less you have to use your air conditioner needs to cool down the house. You can get savings and conserve energy if you turn off your pilot light.
Where is the gas fireplace switch?
First, locate the fireplace controls, they are located usually behind a louver or panel at the bottom of the fireplace. Next, locate the control knob on the gas valve, it usually has 3 labels Off, On, and Pilot. You will also want to locate the ignitor button; it looks very similar to a starter on a barbecue grill.
What is the switch on the side of my fireplace?
What is this? The second handle you may find in your fireplace (usually located on the left inside panel) is a control lever for the outside air kit. When burning your fireplace, the outside air kit lever should always be in the open (or up) position.
Should my gas fireplace have a blower?
Gas fireplaces do not need a blower. Gas fireplaces can be used for hours without a blower as long as the gas fireplace is well vented. This is because a gas fireplace blower is an external unit. It is not an in-built part of the gas fireplace, so the gas fireplace can function without the blower.
