Table of Contents
What is the trim under a window sill called?
The trim piece below the window sill is called the apron.
What is the difference between casing and trim?
Trim is a general term, often used to describe all types of molding and millwork. Casing is a type of molding, typically used to trim the perimeter of windows and doors. Base molding (or baseboard) is a type of molding, which is applied where the wall and floor meet.
What part of the window is the sill?
A sill is the main horizontal part forming the bottom of the frame of a window. A jambliner is a strip which goes on the sides of a window frame that provides a snug fit for the window sash.
How much overhang should a window sill have?
The sill should overhang the front edge of the window frame at least 3/4 inch, but feel free to add up to 4 or more inches to the depth, depending on how much overhang in front you desire – you can make it look like a small shelf if you like.
What is the wood frame around a window called?
The terms window casing and trim are used interchangeably to describe the decorative wood that surrounds the perimeter of the window to cover the space between the wall and jamb.
What is window trim molding?
Quite simply, it’s a moulding profile which frames (or trims) a door or window. Casing is functional as well as decorative. The main purpose of casing is to surround all doors and windows, covering any space or gap left between the drywall and frame.
Are baseboards and trim the same?
Baseboard is the wood (or other material) board that runs between the floor and the wall. Trim is a broad term that encompasses baseboard and other trim throughout the home.
What is applied trim?
Also Referred to as Applied Mouldings. The Applique is a decorative Wall Treatment that is easily achieved by trimming the wall at about the half way mark using a Large Chair Rail and creating shapes using smaller chair rail or panel molding below it. The most common Applique shape is the rectangle.
Should window sills be level?
A window that doesn’t sit straight on the sill may not open and close correctly. For the best protection from the elements and insects, make sure your window sill is level and secure before installing your new window.
What wood do you use for window sills?
Pros and cons of wooden window sills Wood offers an exclusive high quality, great thermal insulation properties and the most popular wood species are solid oak, larch, cherry, ash, chestnut, maple, mahogany and beech. When you are looking for a more affordable option a window sill made of pine wood is a good solution.
What is the difference between a window sill and a window ledge?
a window sill is on the inside and a window ledge is on the outside. In a residence or single family dwelling there’s usually no difference. In old construction there’s a very substantial board at the bottom, tilted outward to allow rainwater to drain.
How wide should window trim be?
Standard door and window trim is typically 2 1/4 inches in width, baseboard is about 3 inches, and crown is about 4 1/2 inches. Standard measurements typically vary 1/16 inch or more.
What is the difference between muntins and mullions?
Sash/window: The part of a window that moves is called the sash. Mullion/muntin: A mullion is a heavy vertical or horizontal member between adjoining window units. Muntins are the narrow strips of wood that divide the individual panes of glass in a traditional sash.
What are the things on the side of windows called?
The window casing is a wood molding that surrounds a window. Window casings cover the edge of the window jambs and the rough openings between the window unit and the wall. Window casings provide a visual frame around the window. Window casings should always be installed before siding.
What is a header trimmer?
In light-frame construction, a trimmer is a timber or metal beam (joist) used to create an opening around a stairwell, skylight, chimney, and the like. Trimmers are installed parallel to the primary floor or ceiling joists and support headers, which run perpendicular to the primary joists.
What is a rough opening?
A rough opening refers to the framed opening of a window. A window frame, however, has a header across the top, a sill plate across the bottom, and vertical trimmers on either side. The difference between rough opening and actual window size will vary by manufacturer.
Can you frame over drywall?
So long as you build a solid frame and connect it well, once installed there is really no chance of existing drywall being “crushed” by the frame. To crush the connecting drywall after installation, you’d need a very serious lateral force which is enough to flex or shift the frame itself.
What do you call a wall that doesn’t reach the ceiling?
For all intents, a pony wall is just a short wall that does not reach the ceiling; it need not be any particular height nor width, though it typically reaches about 3 feet tall.
What is Craftsman style trim?
Craftsman-style homes are inspired by hand-crafted features. Unlike Victorian homes, Craftsman homes feature horizontal lines and take an artisanal approach to decoration. Craftsman style homes typically feature thick trim around the windows and doors.
Is MDF good for window trim?
MDF is easy to cut and shape, and it paints up beautifully. And even better, by cutting the parts to length first and routing the shapes around the corners, you eliminate all the fussy miters. Since MDF is relatively cheap, a goof here or there won’t cost much. We’ll show you how to make trim for windows and doors.
What are the different types of window trim?
Types of Window Casing Complete Casing. This type covers all sides of your window. Low-Profile Casing. Unlike the modern window casing mentioned above, this style does not provide much decorative touch to the building. High-Profile Casing. Modern Casings. Traditional Casing.
