Table of Contents
What is the best size grout line for 12×24 tile?
A large tile, such as 12×24”, usually requires a 3/16” grout line, so it’s best to check the manufacturer’s recommendations to see how small you can go.
Where do you start when tiling a shower?
Start out level Start tile on a level board. Screw a straight board to the level line and stack tile on the board. Close-up of improper spacing. Don’t start on the edge of the tub or shower. Don’t start the first row of tile by resting it against the tub or shower.
Can you use thinset on 12×24 tile?
You often hear about using “thin set” to install tile, but in the case of installing 12×24 tile as flooring, you’ll want to use something called “medium bed” mortar. The medium bed holds its consistency better than the thin set, which will sag a bit in the middle of the tile.
Which wall do you tile first in shower?
Always tile the back wall first in a shower/tub so that you can hide the grout joints on the sides.
How do you lay 12×24 tile in a small bathroom?
For a much smaller space, such as the bathroom, it’s best to lay down the tiles the long way, where the longer side is set vertically. Visually, a long and narrow direction lengthens a small room.
When tiling a shower do you start at the top or bottom?
When setting the sidewall tiles, start at the outside edge and work toward the corner [9]. Ideally, the outside edge of the sidewalls will start only with full and half tiles. As with the back wall, lay as much tile as you can before making a trip to the saw for cuts.
How do you fill gap between shower and wall?
Fill gaps up to 1/4 inch in width with caulk. If you have tile on the wall adjoining the tub, select a caulk that matches the color of the grout. If your gap is smaller than 1/8 inch in width, use regular caulk; fill gaps larger than 1/8 inch with a sanded caulk.
What size tile spacers for shower walls?
Spacers Size For a standard look, you should have 1/8 inch grout lines for the floor and 1/16 inch for the walls. If you are using regular sized tiles from 16 by 16 inches to 12 by 12 inches, you can go up by 3/16 inches, depending on the overall look you want.
What size notched trowel for 12×24 tile?
¼ inch x ⅜ inch square notch trowel This sized notch trowel is also great for installing 12x12s, 13×13’s, and 16×16’s. Additionally, I like to use this size trowel for the bigger “subway” tiles such as the 4×12’s and 4×16’s.
Which way do you lay rectangular tile in a bathroom?
You should tile the floor the opposite direction of the rectangle tiles. You don’t want rectangle tiles in rectangle direction in a rectangle room. It will look like a narrow hallway. Laying the tiles the opposite way will balance out the size of the room.
How much thinset do I need for 12×24 tile?
Thinset & Grout Coverage Info TILE SIZE RECOMMENDED SPACING Sq Ft COVERAGE (based on 25lb sanded) 12 inch 3/16 inch 115 – 125 Sq Ft 18 inch 3/16 inch 140 – 150 Sq Ft 12 x 24 inch 3/16 inch 130 – 140 Sq Ft 24 inch 3/16 inch 190 – 200 Sq Ft.
What goes first shower pan or walls?
Whether you choose to install tile or the panel walls, drywall always goes on top of the shower pan, after the pan is set into the floor. Both tile and shower walls perform the same function, they just do so with different types of materials.
Do large tiles crack easier?
The bigger the tile, the more the tile will feel the effects of deflection in the subfloor, and as a result the stronger the subfloor should be in order to use large format tile. As for the thicker tile being less prone to cracking, yes, you’re correct.
Should I stagger large format tiles?
Instead of a 50% stagger, manufacturers recommend these tiles should be designed with patterns that do not exceed a 33% stagger. Other issues that affect lippage are the width of the grout line and the light source.
How thick can mortar be under tile?
Most tile installations require a 3/16-inch layer of mortar beneath the tile. A mortar layer 3/16 an inch thick is accomplished by spreading mortar with a 3/8-inch by 3/8-inch square-notched trowel. This thickness is ideal for most tile installations. However, sometimes a thicker layer of mortar is required.
Can I use large tile in a small bathroom?
A small bathroom can actually benefit from a large tile. With fewer grout lines the walls and floor are less cluttered and the room visually expands. One can either use the same tile on the wall and floor or create a contrast with large square tiles on the floor and rectangular 300 x 600mm tiles on the walls.
What tile spacers should I use?
Regardless of the type or style of tile (porcelain, ceramic or stone) a minimum of 3mm tile spacers should be used for floor tiles. Depending on the tile, the spacer required can go as high as 10mm. Most commonly a 5mm spacer is used, especially if you’re using indoor to outdoor tiles.
