Table of Contents
How do you tighten the tension on a chainsaw?
There is a tension screw located near the base of the bar on the chainsaw. To tighten the chain, turn it clockwise, and to loosen turn it counterclockwise. Don’t over-tighten the chain as this could cause it to break.
Why is my chain on my chainsaw loose?
Chain Not Set Properly One of the most common reasons why your chain might be coming loose is because it was not set properly. When you go through the steps to tension your chain, you need to finish those steps by setting the tension so it won’t change as you work your saw.
Why won’t my chainsaw chain tighten?
If you can’t tighten the chain, you may not be implementing the proper tightening procedure. To adjust the chain, loosen the nuts that hold the guide bar in place. Attempting to turn the tension screw without loosening the nuts first may be the reason you can’t tighten the chain.
What is the proper tension on a chainsaw chain?
A properly-tensioned chainsaw chain should still be just a little loose on the chainsaw guide bar, but the chain needs to be tight enough that you can’t pull the drive links out of the bar nose.
How do I know if my chainsaw chain is worn out?
There are several signs that show if your chainsaw chain is worn out: The Chain Comes Off the Bar easily. There is smoke. Some teeth are missing. The chainsaw chain is chipped. A lot of rust. You cannot cut through wood as well as you would have expected. The Chainsaw Has a Shaky Performance.
What causes a chain to stretch?
Another highly significant factor in chain stretch is the accumulation of dirt particles between parts of a chain. These particles form a paste with existing petrochemical lubricants, and they will cause pins, rollers, and bushings to lose material rapidly, again resulting in an overall elongation of the whole chain.
How do I stop my chainsaw chain from stretching?
Every chainsaw has a tension screw that’s located at or close to the base of the chainsaw bar. If you want to tighten the chain, turn the tension screw clockwise. If you want to loosen up the chain, turn the tension chain counterclockwise.
How long should a chainsaw blade stay sharp?
A chainsaw may only need to be sharpened once a year if it is rarely used, but a tool that is frequently used will need to be sharpened regularly to ensure that the blade doesn’t get too dull. On average, a chainsaw blade will retain its sharpness for about 3 hours of actively cutting through wood.
How much does it cost to get a chainsaw sharpened?
HOW MUCH DOES IT COST FOR YOU TO SHARPEN MY CHAIN PROFESSIONALLY? If you bring the chain into our shop off your saw, our average chain sharpening price ranges from $13- $16.00, depending on the number of cutters.
Do all chains fit all chainsaws?
Not every bar or chain is right for every saw. For example, larger chainsaw bars work best with more powerful saws because it takes more energy to drive a chain around a long bar. That’s why electric saws use bars 18″ and shorter. Similarly, chainsaw chains are measured to fit certain bars.
How often should you replace your chainsaw chain?
When you own a chainsaw and see that it does not cut as well anymore you will have to decide whether to replace it or sharpen the chain. A chainsaw chain could serve you for more than five years if it is occasionally used, and still help you accomplish most of your tasks.
Do chains really stretch?
Do bicycle chains really stretch? The short answer is no, however they do wear in such a way as to cause their maximum length to increase. Mechanics usually refer to this as chain “stretch.” It is the sign of a worn out chain that should be replaced.
How do I stop my timing chain from stretching?
It is important to have your vehicle serviced regularly for oil changes—every 5,000 miles and with the correct oil. Doing so is the best preventive maintenance of timing chain stretch and hop.
What is chain stretch?
Chain wear is commonly referred to as ‘chain stretch’, because the chain’s pitch grows in length as it wears. It’s often stated that a worn chain is when it reaches one percent growth from the original 0.5in (12.7mm) pitch. Another type of chain is wear is ‘slop’.
Do chainsaw chains have a master link?
Locate the master link that most manufacturers install to make removal of the chain a simple process. A visual inspection of the chain will reveal the master link due to its appearance that makes it stand out slightly from the other links.
How much can a chain stretch?
The maximum allowable wear elongation is approximately 3% for most industrial applications, based upon sprocket design. The allowable chain wear in percent for large sprockets with 68 teeth or greater can be calculated using the relationship: 200/N, where N is the number of teeth in the large sprocket.
