Table of Contents
For airless spray application, thin material up to 10% with clean water. Do not apply DTM Acrylic Finishes if rain is threatening. If heavy night dew is forecast, stop painting at least 6 hours before dew point is achieved. DTM Acrylics will dry to the touch in 30 minutes and may be re-coated in 2 hours.
How do you apply acrylic DTM coating?
Scrape off large rust spots with a wire brush. Scrub off smaller rust deposits with a scouring pad. Wash the surface with soap, water and a rag. Lay plastic sheets and painter’s tape over nearby items. Spray DTM paint onto the surface with an airless spray gun.
Is DTM paint water based?
Rust-Oleum 3800 System DTM Acrylic Enamel is a fast dry, water-based finish for indoor or outdoor direct-to-metal (DTM) applications. It delivers excellent corrosion resistance and will protect surfaces exposed to mild to moderate environments.
What is DTM acrylic coating used for?
Pro Industrial DTM Acrylic coating is an interior-exterior, water based, corrosion resistant acrylic coating for light to moderate industrial use. Designed for new construction or maintenance use and can be used directly over prepared substrates.
Can DTM paint be sprayed?
The Application Process Most DTMs are applied by brush, roller, or spray. However, the spray method is the recommended method of application because it is easier to use on metal.
Is DTM paint oil based?
Rust-Oleum® Professional DTM Alkyd Enamels are oil- modified alkyds with excellent rust prevention when applied directly to metal. They also offer excellent coverage, chip resistance and color retention.
Can DTM acrylic paint be used on wood?
Can be used on galvanized and aluminum metal Acrylic DTM Enamel is a tough waterborne acrylic enamel that fights rust on metal and provides a smooth, durable finish on wood, drywall and masonry substrates.
How do you clean DTM acrylic coating?
Surface must be clean, dry, and in sound condition. Remove all oil, dust, grease, dirt, loose rust, and other foreign material to ensure adequate adhesion. Do not use hydrocarbon solvents for cleaning. Minimum surface preparation is Hand Tool Clean per SSPC-SP2.
How long does it take Sherwin Williams DTM paint to dry?
We like SW DTM Acrylic Coating because it is resistant to chemicals, dries fast (it’s dry to the touch in an hour and can be recoated in four hours), prevents flash rust/early rust, is a single-component system, has low odor, low VOCs and is easy to clean up with water.
Can you thin DTM paint?
For brush or roller application, thinning is normally not required. For best application results, use a quality synthetic filament brush or a short nap roller cover. For airless spray application, thin material up to 10% with clean water. Do not apply DTM Acrylic Finishes if rain is threatening.
Do you need primer with DTM paint?
PR: Since DTM products don’t require a primer, you’re only applying one coat versus two. Not only is there the reduction in an entire coat but the opportunity for over-spray is also reduced, further eliminating wasted material.
How long does DTM paint last?
How Long Does Dtm Paint Last? The cheapest “primed & painted” rails are available from many builders. A good rust-proof product will offer a 12-year guarantee. They use galvonized steel, dip them, and use powder electrostat, (plus an elamel coating).
What base is DTM paint?
Extremely tough, durable, water base Acrylic coating for painting metal, iron, steel structures. Resists water absorption, exterior weathering, rust and corrosion.
Can you paint wood with DTM paint?
ByBrittney. A tough waterborne acrylic enamel that fights rust on metal, Acrylic DTM Enamel is a smooth, durable finish on wood, drywall, and masonry substrates.
What is the best DTM paint?
We recommend using a DTM (direct-to-metal) product that is especially formulated for this type of work. We recommend Super Spec HP DTM by Benjamin Moore, a product we frequently work with. Painting ferrous metals can be difficult because you are more likely to encounter rust prior to applying coatings.
What does DTM mean in paint?
Direct-To-Metal (DTM) is a type of paint or coating used on metal surfaces. Direct-To-Metal coatings, as the name implies, are applied directly onto a metal substrate without the use of a primer beforehand.
Can I put acrylic paint in a paint sprayer?
Paint or stain can be sprayed with Airless pain sprayers. The HVLP paint sprayers work with oil-based paint, but thicker paints, such as water-based latex, can clog the sprayer if they are used with thicker paints. Oil-based enamel, acrylic, and latex paints can be sprayed with pneumatic paint sprayers.
What is DTM primer?
PRODUCT DESCRIPTION. DTM Acrylic PriMer/Finish is a 100% acrylic emulsion, waterborne, corrosion resistant coating for both new construction and industrial applications. It can be used as a primer under most water based topcoats or alone as a primer/topcoat system. It can be used directly over multiple substrates.
Can I use Behr paint on metal?
BEHR PREMIUM Interior/Exterior Direct-To-Metal Gloss Paint is engineered for excellent adhesion to a variety of properly prepared or primed residential and light commercial metal surfaces. It provides a durable finish that withstands tough elements on both interior and exterior surfaces.
What paint is best on metal?
Oil-based paints are the most durable. You’ll achieve a more uniform finish if you first apply an oil-based primer (e.g., Rust-Oleum Clean Metal Primer, $8.98 per quart on Amazon). However, you can apply oil paint directly to metal because it contains no water, and therefore there’s so no risk of rust.
Is acrylic paint the same as alkyd?
For exterior house trim, acrylic is more durable than alkyd. It is more durable, washable and it has a more attractive finish than acrylics. Alkyd paint can be applied over acrylic or latex paints. However, acrylics and latex may not adhere well to an alkyd paint.
