Table of Contents
Hold the Test Button on the front of the sensor for 4 seconds. The sensor will beep 3 – 4 times.Glassbreak Sensors: Press Test Button on the top of the sensor. Clap your hands loudly near your windows. Glassbreak sensors will respond to any loud sound in Test Mode (whereas normally they only respond to breaking glass).
How do I know if my SimpliSafe alarm is on?
When your alarm is on and one of your sensors is triggered, the Keypad will start beeping and prompt you for your PIN. You have 30 seconds to turn the alarm off – this time is called the “entry delay.”.
What is test mode on SimpliSafe?
Test Mode is a System State you can manually enter through the Menu on your Keypad. It is a great way to check the connection between the Base and the Dispatch Center as well as the Base and its sensors. Entering Test Mode does not affect your Monitoring Status.
What happens when SimpliSafe alarm goes off?
If an Entry-, Motion-, or Glassbreak-triggered alarm is disarmed within 30 seconds of the initial alarm signal, our monitoring service will consider this a false alarm. That means you will not receive a phone call and police will not be dispatched. Otherwise, the monitoring center will dispatch the police.
What is test mode on alarm?
Overview. Test mode turns off alarm signals going to the central monitoring station. This may be used for when you are sanding and need to prevent smoke detectors from causing alarms due or to prevent false alarms from glass break sensors when you’re doing construction.
What is the red button on top of the SimpliSafe keypad?
The Panic Button is the red button on the top of the unit. You’ll want to press it for 2 seconds to activate.
Can SimpliSafe tell you what door is open?
SimpliSafe will warn you that a door or window is open with a message on the Keypad that says “1 Entry Sensor open” or “Entry Sensors open”, and also with a voice prompt from the burglar alarm’s Base Station. Close open doors / windows.
What does SimpliSafe panic button do?
Take instant action against burglary and other emergency situations with this SimpliSafe panic button. When pressed, it triggers your security system’s alarm to immediately notify SimpliSafe or the police of your urgent call for help.
What does red light on SimpliSafe Base Station mean?
The red LED indicates the alarm you have set for your simplisafe base station. The pulse will last for 1-2 minutes before the LED turns solid red. You can simply turn off the alarm. Wait for the light to go, and the LED on base station will be remain solid.
Can SimpliSafe be bypassed?
A SimpliSafe Security System Can Be Bypassed with a $2 Device.
Are SimpliSafe smoke detectors monitored?
Detects smoke before a fire. Built with photoelectric sensors, our Smoke Detector sounds an alarm the second smoke is detected. With professional monitoring, we are notified and will dispatch fire response to your home immediately even if you’re not home—unlike typical smoke detectors that only sound the siren.
Is SimpliSafe easily hacked?
With over 300,000 customers in the United States, SimpliSafe security home alarm system has been exploited for being easily accessible to attack from hackers. This translates to hackers having not only full access to the alarm but also the ability to disarm the system entirely.
How do I get SimpliSafe out of test mode?
Follow the instructions below and on the Keypad to test your devices. The Base Station will announce the sensor type to confirm that it has received the signal. Press the left arrow to exit Test Mode.
How do I adjust my SimpliSafe Motion Sensor?
NOTE: You can turn down the sensitivity of the motion sensor via the switch on the back of the sensor. Simply slide the motion sensor off its bracket, and you will expose a small black switch. Slide it towards the “L” to lower the sensitivity.
Is SimpliSafe cellular?
SimpliSafe keeps you protected 24/7! It also features a cellular module that operates on a cellular network instead of WiFi. The Base Station will automatically communicate on the cellular network if your WiFi stops working and will automatically switch to battery power if you lose electricity.
What happens when you push the SimpliSafe panic button?
If you’re at home during a break-in, pressing the Panic Button instantly triggers your alarm. With professional monitoring, our monitoring center will call and check if you’re okay. If you don’t answer your phone or give the “safe word,” we will alert the police that you’re in danger.
Does SimpliSafe keypad have a panic button?
The Keypad is used to arm and disarm your system. Also, in case of an emergency Keypads have a red panic button, which will trigger the alarm if you press and hold it for more than two seconds. Customers can change their system and device settings through their Keypad’s menu as well.
Is there a panic button on SimpliSafe app?
am I missing the panic button in the iOS app, or is there not one? The Panic Alarm is intended to let dispatch know that you are on the premises and need help ASAP. That’s why the only way to trigger it is through the Keyfob, the Keypad, or the dedicated Panic Button – and not on the app where you can trigger remotely.
