Table of Contents
To measure it, set your digital multimeter to around a thousand ohms resistance setting. Connect the black leads to the white ground wire on your ballast. Afterward, test every other wire with the red lead. When you do this test, a good ballast will return an “open-loop” or max resistance.
How do I know if a ballast is bad?
If your fluorescent lighting is displaying any of the signs below, it could be a symptom of a bad ballast: Flickering. Buzzing. Delayed start. Low output. Inconsistent lighting levels. Switch to an electronic ballast, keep lamp. Switch to an electronic ballast, switch to a T8 fluorescent.
How do you tell if a fluorescent ballast is bad?
If the ballast is bad, the needle on the multimeter will not move. If the ballast is still good, the needle should sweep to the right across the face of the multimeter. Install a new ballast, if necessary. Replace the ballast cover on the fluorescent light fixture.
How do I know if my ballast needs to be replaced?
2. Look for warning signs that the ballast is failing. Buzzing. If you hear a strange sound coming from your bulbs or light fixture, like a buzzing or humming noise, that’s often a sign your ballast is going. Dimming or flickering. No lights at all. Changing colors. Swollen casing. Burn marks. Water damage. Leaking oil.
Will a bad ballast burn out bulbs?
The ballast itself can go bad, which causes lights to flicker or even appear to be burnt out, when in fact they aren’t. They require maintenance and energy to power, on top of the power used to light the fluorescent bulb. They are a large part of the equation when using fluorescent lamps.
What does a bad ballast smell like?
A common source of these odors is the fluorescent light ballast. When called to such an incident, you typically will find an electrical odor or a haze of smoke. Overheating ballasts often exhibit symptoms. They may cause the bulb to flicker, shine, dim, or not work at all.
Why are my fluorescent lights flickering?
If your fluorescent bulbs flicker, most likely the problem is with the bulb itself. If the bulb is very dark on either end, it may be defective and burned out. The best way to test the functionality of a bulb is to put it into a fixture you know works. Flickering fluorescent lights can also be a result of temperature.
Why do my fluorescent lights not turn on?
The fluorescent tube won’t turn on No electrical power due to a tripped breaker or blown fuse. A dead or dying ballast. A dead starter. A dead bulb.
How long do ballasts last?
According to the Certified Ballast Manufacturers Association, the average magnetic ballast lasts about 75,000 hours, or 12 to 15 years with normal use. The optimum economic life of a fluorescent lighting system with magnetic ballasts is usually about 15 years.
What happens if you use wrong ballast?
If you use a wrong sized ballast the LRC will not be tuned so you are likely to not start the lamp at all. There is the possibility of burning out components pre-maturely also due to overcurrent and overvoltage conditions particularly if using a larger ballast on a smaller fixture.
How much does it cost to replace a ballast?
A replacement ballast costs about $10-25 depending on capacity and brand. The bite is that an electrician trip charge (which includes 30 or 60 minutes work) is going to be $75-150 probably – for about 5 minutes work on each light fixture.
Can a fluorescent light work without a ballast?
Reverted question “ Can I make a fluorescent light work without a ballast?” yes, you can, but you need something to reduce the current as the bulb warms up. So, you can drive a fluorescent with a pulse width adjustable power supply, but this is what is in an ‘electronic’ ballast.
Will LED lights work if ballast is bad?
Can LED lamps work off of existing ballasts? Yes, if they have an internal driver than can work off that ballast. Philips, for example, has designed a tube that is compatible with an existing electronic ballast.
Is ballast needed for LED tube?
No LED bulbs require a ballast, although some are engineered to work with an existing ballast. You will find ballast-compatible or “plug-and-play” LEDs that are designed to replace linear fluorescents, compact fluorescents, or HIDs. Incandescent and halogen lamps do not require a ballast.
Can a bad ballast cause a fire?
As with any electrical situation where overheating is possible, a bad ballast can pose a fire danger. The overheated ballast could cause the plastic housing on the light itself to melt and, in the right conditions, flame up.
Why would a ballast melt?
Incorrect Bulbs When a bulb of the wrong size or voltage is used in the fixture, the ballast often overheats, causing the light to shut off. The bulbs and the fixture must also match in frequency, or the ballast becomes overworked and overheated.
Can fluorescent lights cause a fire?
Overheated fluorescent lights can cause fires! Overheating of the ballast could result in the following: Ignition of nearby combustible materials. Explosion of the ballast due to the generation of gases inside.
How do you fix a flickering fluorescent light bulb?
Brush dust out of sockets, then reseat firmly. If the tube still blinks when the light is turned on, wiggle it a few times while the light is on to see if this cures the problem. If not, take the tube out and inspect sockets closely to see if spring contacts are bent or corroded.
