Table of Contents
To find out if your scooter is AC or DC is real easy. If you turn the key on and your headlights come on, your scooter is DC, if you have to start your scooter and have it running to get your Headlights to come on your scooter is AC.
How can you tell the difference between AC and DC CDI?
Your CDI has two plugs, a 4-pin and a 2-pin. If the 2-pin connector has only 1 wire going to it, it’s a DC CDI. If there are 2 wires attached to the 2-pin connector, then it’s an AC CDI.
Are Chinese scooters AC or DC?
Many scooters with chinese 2 or 4 stroke engines are mounted with different types of CDI. They are either AC type : Alternating current or DC type : Direct current. To find an unlimited CDI, you must first identify the type of ignition you have. The easiest way is to do this, engine running, with an electric tester.
Is a 5 pin CDI AC or DC?
SPECIFICATIONS: PINS: 5. TYPE: ALTERNATING CURRENT (AC) COMPATIBLE WITH: 12v SYSTEMS.
Is a Kymco Agility 50 AC or DC?
The capacitor discharge ignition (CDI module) or ignitors used on KYMCO gas scooters are unique in that they are direct-current (DC) units, as opposed to the AC modules found on most other scooter brands. If you are a KYMCO owner you know how finding these parts can be a frustrating and often difficult process.
How do you test a DC CDI box?
First take the leads of the multimeter and connect them together. If you are using a digital multimeter then you should hear a beeping sound. Measure for continuity between all the ground and the various other points. If your cdi is working well, you should not hear any sounds.
Can you bypass CDI box?
It is possible to bypass a CDI module on an ATV, but it should be only a temporary action.
How does a DC CDI ignition system work?
Working Principle of a CDI System. A capacitor discharge ignition works by passing an electrical current over a capacitor. This type of ignition builds up a charge quickly. A CDI ignition starts by generating a charge and storing it up before sending it out to the spark plug in order to ignite the engine.
How does a CDI unit work?
In a CDI system, a charging circuit charges a high voltage capacitor, and at the instant of ignition, usually determined by a crank position sensor, the system stops charging the capacitor, allowing the capacitor to discharge its output to the ignition coil before reaching the spark plug.
What does a CDI box do on a scooter?
The CDI is like a computer as it controls the engine of your scooter. It instructs the fuel injectors when and for how long they should spray. It also directs the spark plugs on how to perform especially when they have to fire.
How do I know if CDI is not working?
Symptoms could include misfiring, dead cylinders, backfiring, bizarre tach behavior, and countless other things related to how your engine’s running. The problem may get worse as the bike warms up. It might not even hold low revs at all.
How do you check a CDI on a jet ski?
CDI Power and Turn On Signals Test: Remove CDI from e-box as we will be checking signals in the now exposed CDI connector. Set multimeter to volts (autorange or 20V setting is fine) Connect jet ski 12V battery. Connect the stator loom (3 yellow wires and one black wire) to the front cover of the engine and to the e-box.
How do you remove a CDI rev limiter?
To remove the rev limiter on the agility, filly, Sento, and people 50s Kymco mopeds, make a cut in the cdi box as shown in the image. There is a wire about 1/4″ below the surface that gets cut. Only these models. You will be able to see the copper of the cut wire, cut just enough to get through it.
How do you test a motorcycle coil with a battery?
connect the coil and HT lead to a loose spark plug and wire the plug to the battery negative. Then connect the battery positive to the coil positive input. connect a loose wire to the coil negative and strike the battery negative terminal temporarily. every time it disconnects there should be a spark.
What does CDI stand for?
CDI Acronym Definition CDI Chronic Disease and Injury CDI Career Development International (various locations) CDI Capacitive Discharge Ignition CDI Comitê Para a Democratização da Informática (Portuguese: Committee for the Democratization of Information Technology; Brazil).
Can a bike start without CDI?
Is there a way to start a bike without the CDI unit? – Quora. Yes, you can with a mechanical unit. But customizing one will take lots of time and effort. It might be even more costly to custom build one as the CDI on the market shelf is mass produced one hence efficiently produced.
Are CDI interchangeable?
Because ignition characteristics (particularly timing) vary widely across vehicle models, there’s no one CDI box that can cover them all. The CDI must be matched to the engine that’s being worked on. The CDI boxes in these systems are not interchangeable.
What is AC-CDI and DC-CDI?
The AC-CDI ignition system is the most common CDI in small engines. The module gets its power solely from the alternator in form of alternating current. DC-CDI. This kind of CDI is powered by a battery. The system comes with a DC/AC inverter circuit to raise the voltage from the 12V DC up to 400-600 V DC.
What does a CDI unit do on a motorcycle?
Essentially, a CDI box controls a motorcycle’s ignition system by starting the ignition and combustion process. A pulse of voltage from the motorcycle battery passes through the CDI box to fire up the spark plug.
Does CDI ignition need battery?
AC-CDI is fitted to the majority of bikes, generators, chainsaws etc. Requires no battery at all for the engine to start and run. The energy comes direct from the flywheel generator. DC-CDI however requires a low voltage supply (typically 12 V).
