Table of Contents
Toilet seats are sold by shape (not by length). If the length is between 18-19.5 inches, you have an elongated toilet bowl seat. If the length is between 17-17.75 inches, you have a round toilet bowl seat. Notice also that the elongated bowl is shaped more like an oval (egg-shaped).
How do I know the shape of my toilet?
You can determine if a toilet seat is round or elongated by taking one simple measurement. Measure the length of the toilet bowl from the center of the toilet seat bolt holes at the back of the toilet, to the front edge of the toilet bowl. Round toilet bowls measure at about 16.5 inches.
Can you put an oval toilet seat on a round toilet?
An elongated bidet seat will still mount on a round toilet, as well as function just fine, but the aesthetics and comfort of the seat will be greatly diminished.
Which is better toilet round or elongated?
Most people find elongated toilet bowls to be more comfortable, but in a small bathroom, a round bowl can save space. Elongated toilet bowls measure up to 31″ from the wall, while round fixtures max out at 28″. Because round bowls are less expensive than elongated bowls, they save a few dollars, too.
What’s the difference between a round toilet and an oval toilet?
The only difference in appearance is the shape of the bowl itself. A round-front toilet bowl is closer to a true circle. It, therefore, extends less into the room. An elongated toilet bowl is oval, extending several inches more into the front of the room.
Are all elongated toilets the same size?
No, there isn’t a standard size for all toilet seats, due to a variety of toilet styles. To find out the best seat for your toilet, you will need to measure your loo. The width of the toilet bowl at its widest point. The length from the front of the bowl back to the two seat-fixing holes.
How do I know what size toilet to buy?
To measure the bowl shape, you can start by putting your measuring tape at the back of the toilet, and extend the tape forward to the end of the bowl, measuring parallel to the floor. The most important measurement you can take for a replacement toilet is the rough-in dimension.
Can you replace a round toilet seat with an elongated toilet?
Putting an Elongated Toilet Seat on a Round Bowl Hence, it’s possible to put an elongated seat on a round toilet. You can still do it even when there’s a larger rough-in. However, plumbing configuration or moving the wall to give some more space to the toilet is required.
Can I replace round toilet with elongated?
Yes and Make the rough in distance from the back wall 13–1/2 inches and 16- 1/2 inches high toilet from the floor. and place it 1ft 6 inches from any side wall.. That will be perfect and then you can enjoy it.
Are 1 piece toilets better?
One piece toilets are typically heavier and easier to clean, and there’s less space for bacteria to grow. Because two piece toilets feature a detachable tank, they’re more customizable for preferred styles and heights. Both styles can include bells and whistles like bidet attachments or low-flow energy saving.
What is the difference between a 10 inch and 12 inch rough in toilet?
Considerations. When a toilet with a 10-inch rough-in is placed in a 12-inch rough-in space there will be 2 inches of open space between the tank and wall. However, the extra inches will cause the tank to be further away from the shutoff valve on the wall, so a longer connector may be needed to reach effectively.
What does 12 inch rough in size mean for toilets?
The toilet rough-in refers to the distance from the finished wall to the center of the toilet’s floor drain or waste outlet. Most toilets have a rough-in of 12 inches, although it’s not uncommon for older homes to have an unusual size such as 10″ or 14″. Rear-outlet toilets are configured a bit differently.
What is the size difference between round and elongated toilets?
A round front bowl generally has a dimension of approximately 16.5″ from the seat bolt holes to the tip of the bowl. An elongated bowl is approximately 2″ longer, or about 18.5″. (Note: these dimensions can change from manufacturer to manufacturer, but there is almost always about a 2″ difference between the 2 sizes).
What is the advantage of an elongated toilet?
The elongated toilet is considered modern and stylish compared to the traditional round bowl. However, this toilet design might take up more space in your bathroom. That said, the elongated bowl benefits include more comfort, ease of cleaning, lower costs considering long-term benefits, and lower chances of clogging.
What is a elongated toilet?
Elongated toilets are a more modern look that best suits a standard bathroom or larger. While round toilet bowls measure about 16.5 inches, an elongated bowl is usually 18.5 inches so you need some extra room.
What are toilet sizes?
Standard toilet dimensions are typically between 28–30″ deep, roughly 20″ wide, between 27–32″ high, and have a rough-in between 10–14″. Now you can find the perfect toilet.
Are toilets universal size?
Are there different sizes of toilet? Yes, toilets come in a range of different sizes, that’s why it’s important to measure your existing toilet seat before you buy.
What is comfort height toilet?
Toilets come in all types of styles and finishes to match your bathroom and preferences. Traditional toilets are 15 inches high. Comfort height toilets (or “right height” toilets) have higher seats than traditional toilets, usually between 17 inches and 19 inches.
