Table of Contents
Now to check the heating unit to determine whether it is gas powered or electric powered. Remember, a gas furnace uses a burner to produce heat. If it is a gas furnace, there will be a small window on the front of the furnace where you should see a blue glowing flame.
How do I know if my gas furnace is lit?
How to Tell If the Pilot Light Is Out Locate the front cover panel on your furnace. It should be a little door that’s easily visible. If your pilot light is on, it should be easy to see – your eyes will be drawn to the little flame. If you don’t see a flame, your pilot light is out. If there is a flame, check the color.
How do I know if my furnace is not working?
A furnace warning sign is a flickering or yellowish looking flame. This is an indication that the gas is not burning completely. It is also an indicator that your heating system may be producing a higher than normal level of carbon monoxide.
How do I know if my heating is working?
What to Check First If Your Heater Isn’t Working Check the Furnace Power Switch. Some furnaces have an on/off switch that is frustratingly easy to switch off by mistake. Look at Your Fuse Box That Powers Your Heater. Check the Batteries in Your Thermostat. Replace the Air Filters. Notice Any Odors. Heater Isn’t Working?.
Why is my furnace not running?
Ensure your furnace filters are clean: Your furnace won’t start up if it does not get enough airflow. Check your pilot light: If you have a gas furnace and gas supply is stopped your pilot light will go out. Check your blower motor: If the blower motor is not working then your furnace won’t pump out warm air.
How do you turn on a furnace?
Set the thermostat. The thermostat of your furnace should now have power. Select the “Heat” setting on the thermostat, then set the temperature to your preference. When the temperature drops below the thermostat setting, the furnace will turn on and heat your home.
Is my pilot light out on furnace?
Remove the front cover panel on your furnace. This should expose the pilot, which simply looks like a small single burner, kind of like a candle or if you only had a single flame lit on a gas stove. If there is no flame, then the pilot is out.
Is there a pilot light on a gas furnace?
Newer gas furnaces (since about 2010) do not have a traditional pilot light that burns all the time. Instead they use electronic ignition systems that light only as needed. Constant flame or “standing pilot” heating systems are still fairly common in older homes, and they can still be repaired in most cases.
Should the pilot light always be on in a gas furnace?
Most furnaces with electronic ignition have a device called a hot surface igniter. The difference is that the flame is only lit (by an electronic spark) when your furnace is ready for a heating cycle. When the pilot light is not needed, it is completely off, saving you money on gas.
Why is my gas heater not turning on?
Check the Pilot Light – A dirty or faulty pilot light is one of the main reasons a gas furnace won’t start. Make Sure Natural Gas Is Flowing into the Furnace – If your furnace won’t start, it may be because the unit isn’t getting any fuel. Simply check the gas control valve to ensure it’s in the “On” position.
Can hear your furnace click on but it does not fire up?
The Pilot Light (Faulty Ignition Sensor) The pilot light or ignition sensor is usually the most common issue when your furnace will not ignite. This is typically the problem if you can hear your furnace click on but it does not fire up. If the sensor or ignitor is dirty, it will need to be cleaned.
Why is my furnace running but no heat?
Dirty filters are the most common cause of furnace problems. Dust and dirt restrict airflow—and if the filter gets too clogged, the heat exchanger will overheat and shut off too quickly, and your house won’t warm up. If the blower is running but no heat is coming out, replace the filter.
Why is my furnace not blowing hot air?
Heater Not Blowing Warm Air Because of Thermostat Settings. Make sure you check the thermostat which controls your HVAC system. If your thermostat is set correctly and your heater is still not coming on, you may have a faulty thermostat. If these fixes do not work, a call to an HVAC professional is in order.
Can Hear furnace but no heat?
When you turn the furnace on but no heat comes out, there may be an obstruction. Dirty air filters restrict airflow, which can make it feel like not much heated air is coming out of your vents. Check the furnace filter and replace it if its surface is covered with contaminants.
Where is the reset button on furnace?
Locate the reset button on the furnace and press it to reset the furnace. It is usually located inside the blower compartment on the side of the blower motor. Be cautious as the housing may be hot. If the button is popped up, press it down.
Do I need to turn my furnace on and off?
When a furnace keeps turning on and off, it is usually due to short cycling. This is the term used to describe problems originating from within the heating system. If short cycling is not promptly diagnosed and corrected, it could cause permanent damage to your heating unit and higher utility bills.
