How To Tell If A Ballast Is Bad

Table of Contents

If your fluorescent lighting is displaying any of the signs below, it could be a symptom of a bad ballast: Flickering. Buzzing. Delayed start. Low output. Inconsistent lighting levels. Switch to an electronic ballast, keep lamp. Switch to an electronic ballast, switch to a T8 fluorescent.

How do you check for a bad ballast?

One probe of the multimeter should touch the hot wire connections, while the other touches the neutral wire connections. If the ballast is good, an analog multimeter has a needle that will sweep to the right across the measuring scale. If the ballast is bad, then the needle won’t move.

How do I know if my ballast needs to be replaced?

2. Look for warning signs that the ballast is failing. Buzzing. If you hear a strange sound coming from your bulbs or light fixture, like a buzzing or humming noise, that’s often a sign your ballast is going. Dimming or flickering. No lights at all. Changing colors. Swollen casing. Burn marks. Water damage. Leaking oil.

How do I test a ballast with a multimeter?

To measure it, set your digital multimeter to around a thousand ohms resistance setting. Connect the black leads to the white ground wire on your ballast. Afterward, test every other wire with the red lead. When you do this test, a good ballast will return an “open-loop” or max resistance.

Will a bad ballast burn out bulbs?

The ballast itself can go bad, which causes lights to flicker or even appear to be burnt out, when in fact they aren’t. They require maintenance and energy to power, on top of the power used to light the fluorescent bulb. They are a large part of the equation when using fluorescent lamps.

Why are my fluorescent lights flickering?

If your fluorescent bulbs flicker, most likely the problem is with the bulb itself. If the bulb is very dark on either end, it may be defective and burned out. The best way to test the functionality of a bulb is to put it into a fixture you know works. Flickering fluorescent lights can also be a result of temperature.

Why do fluorescent ballasts fail?

Flickering fluorescent tubes can cause the ballast to overheat and fail prematurely! When it’s too hot or too cold, the ballast can burn or fail to start your lamps at all. Heat combined with prolonged condensation inside an electronic ballast can cause corrosion and ballast failure.

How long should a ballast last?

According to the Certified Ballast Manufacturers Association, the average magnetic ballast lasts about 75,000 hours, or 12 to 15 years with normal use. The optimum economic life of a fluorescent lighting system with magnetic ballasts is usually about 15 years.

How do you know when a fluorescent ballast is bad?

How do you tell when the fluorescent lamp is burn out?

How to Tell If a Fluorescent Tube Is Bad? Check the ends of the tube. If they appear darkened this indicates the bulb is burned out. Rotate the tube in the fixture if the bulb is not darkened on either end. Remove the bulb from the fixture if the bulb is still not illuminating.

How can you tell if a fluorescent light bulb is bad?

Look for dark areas at the base of the bulb. When bulbs age and have been used for a long time, brown spots will appear. If darkness begins to form at the ends of the tube, the bulb may be near its end. While they may still light, they are wearing out and will die soon.

What happens if you wire a ballast wrong?

It will overheat, possibly starting a fire, and then burn out, usually disrupting current flow. Until it does, due to the inductance and resistance, the current will be not quite 90 degrees out of phase with the voltage. Electronic ballasts are 4 or 6 wire devices.

What does a bad ballast smell like?

A common source of these odors is the fluorescent light ballast. When called to such an incident, you typically will find an electrical odor or a haze of smoke. Overheating ballasts often exhibit symptoms. They may cause the bulb to flicker, shine, dim, or not work at all.

Can a fluorescent light work without a ballast?

Reverted question “ Can I make a fluorescent light work without a ballast?” yes, you can, but you need something to reduce the current as the bulb warms up. So, you can drive a fluorescent with a pulse width adjustable power supply, but this is what is in an ‘electronic’ ballast.

Will LED lights work if ballast is bad?

Can LED lamps work off of existing ballasts? Yes, if they have an internal driver than can work off that ballast. Philips, for example, has designed a tube that is compatible with an existing electronic ballast.

Why does my fluorescent light flicker when off?

When a CFL flickers, the cause is usually in the light switch, which is either a dimmer or a switch with an illuminate rocker. Illuminated switches pass a small amount of current even when they’re turned to the “off” position, which is enough to charge the capacitor in the CFL and cause a momentary illumination.