Table of Contents
You can also tell between an 8n and 9n Ford tractors by the positioning of the brake pedal. The 9n has the two brake pedals on opposite sides, so you have a brake pedal close to your right foot and another close to your left foot. On the other hand, the 8n has both brake pedals on the right side.
How can you tell the difference between an 8N and 9N?
The best way to differentiate an 8N from a 9N is by using serial numbers. Search your engine for the engraved serial number. Look at the upper part of your engine block, just behind the oil filter. Ford 8N models start with an “8N”, while 9N starts with “9N.”Jul 8, 2020.
How do I identify a Ford 9N tractor?
The best way to identify a tractor is by the serial number. Serial numbers on the 9N-2N and 8N tractors are located on the left side of the engine block, just below the head and behind the oil filter. The numbers are usually not stamped very deep (or very straight).
What is the difference between a 9N and a 2N?
Key Differences Another main difference between the 9N and 2N was the fact the 9N featured a generator and battery, while the 2N used a magneto and a hand-crank starter.
How can I tell what year my Ford 8N is?
To determine the year of a Ford 8N tractor, the serial number must be located and then compared to a list of serial numbers used by Ford for each of the years in which the tractor was manufactured. Locate the serial number imprinted on the Ford 8N tractor.
How much horsepower does a 9N Ford tractor have?
Ford 9N Ford 9N Power Drawbar (claimed): 12.68 hp 9.5 kW Belt (claimed): 20.29 hp 15.1 kW Plows: 2 (14-inch) Drawbar (tested): 16.31 hp 12.2 kW.
How much horsepower does a Ford 8N have?
23.16 hp Ford 8N Power Drawbar (claimed): 23.16 hp 17.3 kW PTO (claimed): 27.32 hp 20.4 kW Drawbar (tested): 21.95 hp 16.4 kW PTO (tested): 23.24 hp 17.3 kW.
How do you read a Ford 8N serial number?
The best way to identify a tractor is by the serial number. Serial numbers on the 9N-2N and 8N tractors are located on the left side of the engine block, just below the head and behind the oil filter. The hundred series and “01” series tractor serial number location is on the flat area above and behind the starter.
What year is my Ford 9n?
What Year Was Your Ford Tracor Manufactured? MODEL YEAR Ford 8N 1947 1948 1949 1950 1951 1952 Final Ford 9N 1939 1940 1941 1942 Ford 541 1957 1958 1959 1960 1961 1962 Ford 640 1954 1955 1956 1957.
How do you decode a Ford tractor serial number?
The first is the tractor’s model number. The second is the production code. The final is the tractor’s serial number. These three numbers can give you TONS of information about your tractor, but today we’re going to focus on finding out the exact production date of your tractor.
What color is a 9n Ford tractor?
All 9N tractors were painted dark grey. This tractor has a rear PTO, which could be used to drive three-point or towed implements.
What does 8N mean on a tractor?
The 8N introduced position control, which is a small up/down handle under the seat on the right side–this was an improvement to the hydraulic system. Both brake pedals are on the same side – 9N and 2N tractors were split.
How much weight can a Ford 8N pull?
The Ford 8N utilizes manual drum brakes and has a 10 gallon fuel tank. The tractor features a type 1 rear three-point hitch with a maximum lift of 800 lbs. The internally mounted hydraulic system features four pistons and a maximum pressure of 1,500 psi.
How do I find out what year my tractor is?
Identify the letter and numbers in positions nine through 12 in a 17-symbol VIN. In order, these identify the security code, calender year of manufacture, transmission code, and wheel or track designation. The calender year of manufacture will be denoted by an A for 2010, B for 2011 and so on.
Does 9n have live PTO?
One disadvantage of the Ford N’s was, they are not Live pto and Live hydraulic. When you push the clutch in, they stop. The mower stops mowing and if it was raised, it lowers to the ground.
How much oil does a 9n Ford tractor hold?
Ford 9N Engine Engine Oil Oil capacity: 6 qts 5.7 L Oil change: 200 h.
How much was a Ford 8N new?
Ford 8N Tractor Original Price is $1,404 USD (1952 ).
How much does a Ford 8N tractor cost?
What is the cost of a Ford 8N? In the United States a used Ford 8N tractor is typically priced between $3,600 and $3,600. Variation in price can be due to a number of factors including age, condition, location, and specifications.
How do you read a tractor serial number?
How to read a tractor serial number list: Tractor serial number lists nearly always show the first tractor built in each year. The other tractors for that year will have successively higher numbers. Your serial number should lie between two of the stated numbers.
What color is a Ford 8N tractor?
Pre and Post 1958. The 8N “Gray” has been described as “green/gray” or even as “tan”. The color that we use matches the original product.
What is the difference between a Ford 8N and a Jubilee?
The Jubilee bears a strong resemblance to its predecessor, the Ford 8N, but has many new and improved features. The classic flathead engine of the Ford 8N was replaced with a powerful overhead valve engine. The 32 horsepower, 134 cubic inch engine was so popular it even has its own nickname – The Red Tiger.
What category is a Ford 8N tractor?
The Ford 8N tractor has a Category 1 three point hitch and a claimed pto rated 27.32 hp. The Ford 8N is shown on the left with a rear scrap blade attachment.
What can a Ford 8N do?
What you DO get in the Ford 8N is rugged reliability at a low price. There are plenty of small chores around the farm for which the Ford 8N is perfect. The three-point hitch makes it a versatile tool. I use one frequently for blading the driveway, brush hogging, and pulling a wagon to and from the woodpile.
