Table of Contents
How to Measure Shelves Look at the space where you want to place the shelving. Stretch your tape measure across the area where you want to install the shelf. Step back in order to view the tape. Use the tape measure to determine how much space you want in between the shelves.
How do you measure for wood shelves?
First, measure the height of the shelf, then measure the distance on the wooden shelf bracket from the end of the bracket to the top of the screw slot. Add these measurements together, then add 1″ to allow for the brackets to be slid down into position. For my shelf, this total measurement was 2 1/2 “.
What are shelf dimensions?
Shelf depth is determined by the size of the items to be stored, generally within the range of 6 to 24 inches. Shelf depth for a general purpose bookshelf is usually 10 to 12 inches. Shelf spacing will generally range from 7 to 15 inches with 8 to 12 inches being common for bookshelves.
What size brackets for shelf?
Shelf brackets range in size from 5 inches deep (for shelves holding paperback books) to 24 inches (for desktops and other large spaces). Plan to use brackets that are just a bit shorter than the depth of the shelves. For example, if you want shelves that are 8 inches deep, use 7-inch brackets.
What is the standard depth of a shelf?
The standard depth of most shelves is 16 to 20 inches deep. The highest shelf should be shallower, like 12 inches deep, to make those items easier to access. If you find that stuff seems to get pushed to the back and forgotten about, you should consider even shallower shelves.
What depth should shelves be?
As far as shelf size, a depth of 10 or 12 inches fits most functions without concern of drooping in the middle, while length should be determined based on where you want to install yours. If you want a long span but are concerned about weight, install adjacent, identical floating shelves, or opt for bracket supports.
How do you measure cabinet depth?
Depth: Measure the side of your cabinets, from the cabinet front to where it meets the wall. Standard cabinets are 24 inches deep.
How do you measure pantry pull shelves?
To measure for do it yourself pull-out shelves simply check the depth from the inside edge of the kitchen cabinet face frame (the back side) to the back wall of the cabinet (dimension B). Watch out for any protrusions such as pipes or electric wires or outlets and adjust the size accordingly.
How do you calculate the number of shelves?
If the stacks have a consistent number of shelves, you can simply multiply stacks by shelves to come up with your number. For example, if every stack has six shelves and every row consists of six stacks, 6 x 6 = 36 shelves.
How do you measure wall to wall shelves?
Measure upward from the floor and make marks on both walls every 12 inches, starting from the bottom. Make marks for five shelves. Make the marks 2 inches from the front side of the wall and an identical set 2 inches from the back wall.
What size bracket do I need for a 12 shelf?
The length of the protruding leg must be at least two-thirds of the depth of the shelf. For example, if the desired shelf is 12 inches deep, the supporting legs of the bracket must be at least 8 inches. Usually, both legs of the brackets are the same length; but this is not a hard rule.
How many brackets do I need for a 36 inch shelf?
DETERMINE HOW MANY BRACKETS ARE NEEDED Of course, all shelves are different, but if your shelf is over 36” long, we suggest using more than 2 brackets.
How much weight can l brackets hold?
With up to 1,200 lbs./pair weight capacity, the l-brackets are very durable made of steel, and they are ideal for 12″ – 24″ deep shelving.
How do you calculate equal spacing?
Add the width of your object to the total space you want to fill. In the example given, it would be 223-1/2″. This is distance “A”. Regardless of the actual size of the end posts, columns or buildings, this will give you equal spacing for posts to be added between them.
How do you stagger floating shelves?
Floating Shelves Staggered Use shelves with different lengths placed at varying heights. Add more interest by placing longer shelves above shorter ones. Fill the entire wall from floor to ceiling if you have a large collection to display or layer the wall with dimension.
How do you calculate bookshelves?
Multiply the average width with the total number of books (3 x 200 = 600). This means you have 600 inches total width of book, so you’ll need 600 inches of shelf. If you’re building your own, you have some freedom and flexibility. All you need to do is make sure you build at least 600 total inches of shelf space.
What height should shelves be?
How High Should I Hang My Shelf or Shelves? Like artwork, shelves should be hung at about eye level or about 4 to 5 feet from the floor. If you’re hanging the shelf above furniture, measure about 10 inches from the top of the desk or couch.
How wide is a bookcase shelf?
The standard width is 31 inches. The depth will range from 12 to 13 inches. However, it’s not hard to find a two-shelf bookcase as tall as 36 inches. Two-shelf bookcases are the right size for small book collections, or to serve as bookcases dedicated to encyclopedias and large photographic books.
How much space should be between built in shelves?
The rule of thumb for spacing is 12 inches between each shelf but bump that up to 15 or 18 inches and you enhance that sense of exposure and accessibility.
