Table of Contents
To add a Sync Module, navigate to the Home screen and tap the “add device” + button in the upper right. You are sent to the Add Device screen. 6. Tap Blink wireless camera system.
How do I reset Blink Sync module?
To reset a Blink camera, reset the Sync Module by holding down the button on the module’s side until its light turns red; this resets the Blink camera system and requires reinstalling the module in the Blink app to use the camera again.
Why will my Blink Sync module not connect?
If you receive an error “Unable to Connect to Sync Module” when adding cameras to a system (including the Blink Video Doorbell and Mini), the cause could be certain devices on your Wi-Fi network conflicting with the setup process such as: Smart Thermostats. Baby Monitors. Microwave Ovens, Refrigerators, etc.
How do I get my Blink Sync module back online?
Tap the banner to reach the Sync Module Offline screen. Follow the suggested steps from the Sync Module Offline screen. Verify Wi-Fi connection is working: Reboot the router and wait for internet to return. Verify your Sync Module is displaying a solid green and solid blue light.
How do I update Blink Sync modules?
Keeping Your Blink App Version Current Start the Settings app. Tap General. Tap Software Update. Tap Automatic Updates. Turn on Automatic Updates by swiping the button to the right.
What happens if I delete my Blink Sync module?
Cameras attach to a system through the Sync Module, and the Blink app manages systems. When you delete a system, all of the devices on that system are also deleted. When you delete individual devices, remember that the “system” still exists even with no devices attached.
What is the USB port on Blink Sync module for?
The Sync Module has a USB port as well, we intend to release a firmware update for it that will allow video clips to be stored locally in the sync module rather than in the cloud. The camera has a micro-USB port for power in case you don’t want to run the camera with batteries.
Does Blink camera connect to WIFI or sync module?
Blink’s original Indoor, XT, and XT2 cameras will only connect to the same Wi-Fi SSID that the Sync Module is connected to. To set up these cameras with an extender, be sure to rename the Wi-Fi extender SSID to be the same the main Wi-Fi network, and use the same password.
What does the red light on Blink camera mean?
The red light appears when you first insert batteries. If the red light is not visible, make sure the batteries are fresh. It is also possible to see a brief red flash during motion detection. When the batteries are failing, the camera LED flashes Red 5 or 6 times after the Blue recording light goes out.
Can I delete my Blink account and start over?
Note: Deleting the account removes the account creation date. Changing the email address to a new user, on an existing account, will retain the original creation date. Click here to learn more about how to change the Blink account email address.
Will any USB flash drive work with Blink?
No matter what generation USB 3.1 you have (USB 3.1 Gen 1 or USB 3.1 Gen 2), it will work with the Blink Sync Module 2. The Sync Module 2 has a USB 2.0 Type A port. The USB standard is backwards compatible, meaning all USB drives can be used with the Sync Module 2, so long as the size is between 1GB and 256 GB.
Do I need to keep my Blink Sync module plugged in?
Answer: Hello! Blink cameras cannot function without an active WiFi connection or an online Sync Module. If internet connectivity is lost or if the Sync Module is powered off, the system will go offline until it both are restored.
Can Blink cameras work without WiFi?
Blink cameras can’t operate offline and require a 2.4 GHz Wi-Fi Internet connection. One important reason is because cameras use Wi-Fi to send images and notifications. Blink systems minimally require a high speed connection of at least 2 Mbps upload speed.
How do I sync my Blink camera to WiFi?
To start, tap on the gear icon in the bottom row of the app to enter Account Settings. Then tap on the name of your system under System Settings. Tap on Sync Module to see the status screen, and tap “Change Wi-Fi Network”.
How far can the Blink sync module be from router?
Assuming standard construction techniques (single building, no unusually dense construction materials) the Sync Module should be able to communicate with Blink cameras up to (and perhaps over) 100′ away in any direction. We also recommend keeping the Sync Module near your wireless router for best signal strength.
Can Blink Sync module be placed outside?
Yes, the Sync Module 2 works as a traditional sync module and works with all generations of Blink cameras from our original Indoor (gen 1), XT, and XT2 – to the new Blink Video Doorbell, Indoor (gen 2), Outdoor, and Mini. When an older camera is set up on the Sync Module 2, it uses 7200 seconds of Basic Cloud storage.
What does blue light on blink camera mean?
Hello, the blue light flashing indicates that the camera is detecting movement. It will continue to blink blue for as long as movement is being detected.
Why is my blink camera not working and blinking red?
In Summary. The Blink Outdoor Camera may be sending you signals that something needs to be fixed by flashing different colors. If you see your camera flashing red, that can mean one of two things: either your device is not connected to the internet, or your battery is running low.
How do I transfer my Blink account?
In the Blink app, choose the Account icon from the home screen. You will see your current email address. Choose the email address and continue to log in by entering your password. When changing the email address, note that you must log in on all associated devices with the new email.
How do I register my new Blink account?
Launch the Blink App and tap Create Account at the bottom of the screen. Select your country from the drop-down menu and tap Next. Confirm your region and tap OK. Enter a valid email address, and tap Next. Create a password and tap Create Account. Complete the multi factor account verification process.
