Table of Contents
How long does it take to strip and wax a floor?
The team at ServiceMaster of Kalamazoo are professionals that follow the important steps and techniques, using powerful equipment in order to produce a spotless, protective, and attractive finish to your floors in about 7 hours.
What do you need to strip and wax floors?
Equipment needed to strip & wax floors Mop heads (finish). These will be used for applying the floor finish. Stripping Pad for floor machine. 1 Dust mop. 1 broom with dustpan. 3 – 5 wet floor signs. 1 Box latex gloves. 2 Sets of goggles. 1 Box can liners.
Do you need to strip a floor before waxing?
Over time however, flooring may begin to lose it luster becoming dull and even discolored. When this happens it is time to strip the old wax finish and apply a new coat of wax to the flooring. Not only does this make your flooring shine, but it more importantly protects it.
What dissolves floor wax?
Combine 2 gallons hot water, 2 cups household ammonia and 1 cup of powdered dishwasher soap (with no bleach), and apply to the floor to dissolve the wax quickly.
How often should you strip and wax a floor?
In general, floors should be stripped and waxed annually or every six to twelve months for heavy-traffic commercial spaces, such as restaurants or retail stores. This will help make sure your floor stays looking its best!.
How many coats of wax should you put on a floor?
Always make sure to have more wax on hand than is necessary. You do not want to run out of wax before the job is finished. Most wax finishes, like our Optimal Wet Look Floor Finish will cover approximately 2,000 square feet per gallon. Each finish is different, but most recommend 4 to 5 coats.
Can you buff a floor after waxing?
Once the old wax is gone, apply a new coat with a rag; buff it with the floor buffer, and your floor will look as good as new.
Does vinegar remove floor wax?
To clean hardwood floors, a cleaner specifically made for hardwood floors or a mix of soap and water can be used. Cleaning waxed surfaces – vinegar dissolves the wax, and should not be used to clean waxed furniture. However, vinegar is a reliable option for removing an old coat of wax from a surface.
How much does it cost to strip and wax a floor?
Size, Services, And Location Strip and wax jobs are charged by the square foot. The price you charge your client can vary due to several factors, but the national average is 30 to 60 cents per square foot. However, some jobs can go up to 90 cents or more depending on how difficult the job is.
Can you strip floors with auto scrubber?
Rinse And Dry Floor – Add 1-2 ounces of floor stripping neutralizer per gallon of water. You can also use your auto scrubber or floor buffer mounted with a solution tank to accomplish this. Just make sure to use a different scrub brush or pad than the one you used to strip the floor.
How do I remove Mop and Glo build up?
Linoleum floors — or any flooring designated as “no wax” may suffer from a waxy buildup after using products such as Mop & Glo, which are designed to give floors a shine. Remove that dull residue by adding white vinegar or baking soda to water, then mopping and rinsing the floor.
Does bleach remove floor wax?
Bleach or ammonia based products will strip wax off of the VCT floor. If you cannot find or run out of neutral cleaner, just use plain cold water. Then, find a suitable neutral cleaner when you resume the maintenance the next day.
How do you remove mop and Glo build up from hardwood floors?
Using pure ammonia, spray a small section of your floor and gently scrub the residue up with your fancy new non-scratch pad broom. Immediately mop with clean water then dry with a towel…. repeat. It’s tedious work but you’ll never make the Mop & Glo mistake ever again.
What is the main ingredient in floor stripper?
Caustic agents include sodium hydroxide (NaOH) and potassium hydroxide (KOH). Caustics are responsible for the high pH of floor strippers, which are usually around pH 13-14. Caustics help to remove the floor finish by breaking down the bonds in polymers within the finish.
How long do waxed floors last?
Generally, solid wax coats can last up to two to five years, and liquid wax coats between one to two years. If no re-waxing interval is given, wipe a cloth dampened with mineral spirits over a small section of your floor and inspect it.
Should you wax tile floors?
To wax ceramic tiles is an essential floor maintenance practice that makes the floor shiny and more attractive. Moreover, waxing makes the ceramic tiles waterproof, stain-resistant and creates a non-slip surface.
How many square feet does 5 gallons of wax?
This 5-gallon container covers approximately 10,000 square feet (2,000 square feet per gallon). A 1-gallon container is also available from 1877FloorGuy for your convenience.
Does waxing a floor make it slippery?
Hardwood floors are not naturally slippery, but can become slick after applying a coating of wax or polish, or especially if the floor’s surface is dirty. The best ways to reduce the risk of slipping on your hardwood floor is to keep it clean and dry.
How long should wax sit before buffing?
The Wax will be dry to the touch very quickly but take longer to harden or ‘cure’. The ‘curing’ process can take 5 – 21 days depending on ambient temperature. If you want to achieve a really good shine, allow around 24 hours before buffing.
