Table of Contents
How do you hang string lights on a patio?
Step 1: Select Anchor Points. Lay string lights around the perimeter of your deck. Step 2: Install Screw Eyes. Predrill holes into the wood structural supports in your marked locations. Step 3: Attach String Lights with Carabiners. Step 4: Install Light Bulbs. Step 5: Attach String Lights to Power.
How do you hang string lights outside without trees?
7 Ways on How To Hang String Lights in Backyard Without Trees Hanging Lights on 4X4 Posts. Using Metal Pole and PVC. Along the Fence Lighting. Deck Lighting. Gazebo or Pergola or Covered Patio String Lights. String Lights on Umbrella. Use Planters to String Backyard Lights.
How do you fasten outdoor string lights?
Most commercial-grade patio lights come with clips attached to the top of the bulb socket or the wire above the bulb. If you used a mounting wire, clip the lights onto the wire. Once all lights are up, once again plug the string lights into the exterior outlet or extension cord plugged into an outlet.
How do you hang lights outside without nails?
However, is there any way to hang them up without putting nails into the wall? One of the ways to hang outdoor patio lights without nails is using adhesive hooks or gutter hooks. Alternatively, you can tape or staple them to your wall. You can also hang them on trees, bushes, posts, potted plants, and your fence.
What kind of pole do you use for string lights?
Long vertical poles secured with concrete footings are an easy way to support twinkling string lights and are sturdy enough to stay up for the entire summer season. A little carpentry work and a few basic supplies are all that’s required, and this DIY project can be done in one day.
What are gutter hooks?
There are several brand names, but they’re all basically the same product: a 12-inch acrylic or metal hook that is designed to hold bird feeders, wind chimes, plants, wind socks, and other objects as they hang down from a home’s gutters.
How do you attach string lights to siding?
Use Vinyl Hooks These are specially designed plastic hooks that will hold your string lights without needing nails or glue. The design has a top and bottom part with the top slipping underneath the vinyl siding. The siding will then hold the hook in place.
How do you attach string lights to a metal pole?
Screw a hook on to the top of each pole as well as to the side of the house where the string lights will start and end. Simply hang the beginning of the light set from the first hook and drape across to the next hook, then the next hook and so on.
How do you fix string lights on a fence?
Attach metal mounting hooks or cup hooks onto the wooden posts. These hooks will hold your string lights so you want to be sure that you secure them firmly. Screw your mounting hooks or cup hooks into the wooden posts at one end. Install the posts onto your fence to support your lights.
How do you hang lights without drilling?
Use Adhesive-Backed Hooks Just like with gutter hooks, adhesive-backed hooks can help you hang outdoor lights without using nails or drilling holes. However, you don’t hang these off the lip of a gutter or other surface. Instead, you either peel the back or apply adhesive to the hook and pin it onto a flat surface.
How do you hang lights without holes?
Stick ’em up: Adhesive-backed hooks are the obvious choice for hanging almost anything without creating holes — except a lot of household items are just too heavy a load for these little plastic things to bear.
How do you attach fairy lights to outside walls?
Use nails, thumb tacks, or wall hooks to secure the lights to the perimeter of your desired wall. Secure the lights to the side and top edges of the entire wall; leave the bottom edge along the floor empty. This works best with string lights that have to be connected to an outlet.
How tall should posts be for string lights?
Pole Height For most string lights, about eight to 10 feet is perfect. If you have larger bulbs, you may want to hang the lights a little higher.
Can I use PVC pipe to hang string lights?
It can be a little tricky when hanging lights on a slope. You will want to dig an 18″ hole and then place a PVC Pipe into it. Just make sure it goes below the grass line. We used a level to help guide the pole around and make sure it was straight up and down.
How do gutter hooks work?
Gutter hooks work on any type of light strings and hold tight to gutters. The small size of this clip makes them perfect for maneuvering lights around tight corners too! To use the gutter hook, just slip your light string through one end of the hook and slide the other end of the hook over the lip of your gutter!.
Can you hang a bird feeder from a gutter?
It is safe too hang bird feeders from a gutter fixed to a house or outbuilding, but in doing so the made in plastic gutter would need to be in good condition. Even so, it would be best to hang near to a joint or bracket as its a tougher spot. Likewise, if the guttering in question is metal, hang away with impunity.
How do you hang outdoor string lights on vinyl siding?
Hanging Holiday Lights with Aluminum or Vinyl Siding OPTION 1 – Siding Hook. Hang a vinyl siding hook on your house. OPTION 2 – Suction Cup. Attach a cup hook to the side of your house. OPTION 3 – Wire Hook. Hang a wire hook from the vinyl soffit trim. ABOUT US.
