Table of Contents
Hanging Patio String Lights Basic Steps Draw a rough sketch with measurements. Assemble your poles if applicable. If using guy wire, hang this first. Hang your first patio light string with the male plug closest to your outlet. Use zip ties or hooks between each bulb as needed on deck railings or other structures.
Where do you plug in outdoor string lights?
Here are the most common things you can attach string lights to in your backyard: trees. house, garage, shed, or other building. fence or wall. under the roof of a covered deck or patio. DIY posts or poles in the ground. DIY posts or poles in planters or umbrella stands. deck railing.
How do you hang string lights on a deck?
Instructions Determine how many poles you will need. We used two – one on each of the farthest corners of the deck. Paint or stain the wood poles to match the deck. Allow to dry. Attach poles to the deck. Using wood screws, attach each pole to the back of the deck. Add hooks. Attach string lights.
How do you string small patio lights?
However, you can spruce up your backyard or outdoor space without using a drill or staple gun in one of these ways: Drape your string lights between tree branches. Hang string lights in or on shrubs. Line pathways or walkways with string lights. Use painter’s tape to fasten string lights beneath a deck railing.
How do you hang string lights outside without trees?
How to Hang String Lights In Your Backyard Without Trees Along a Fence. Aside from hanging string lights on trees, perhaps the easiest method is to hang along a fence. On Patio or Deck Railing. On Other Existing Supports. On Other Shrubbery. Build Your Own Supports. Waterproof. Length and Bulb Type. Power Source.
Do patio string lights attract bugs?
Patio Lights That Don’t Attract Bugs LED lights emit very little heat while burning and very little UV light, both of which attract bugs. However, yellow or warm-hued lights tend to be less visible to flying insects helping to keep them away.
Do string lights need to be plugged in?
Testing and Hanging String Lights. Test each string of lights before you install anything. Just plug them in and make sure they all turn on. Because most string lights plug into wall outlets, you won’t need to work with many electrical wires.
How can I power my outdoor lights without an outlet?
How Can I Power My Outdoor Lights Without an Outlet? You may power your outdoor lights without an outlet – even without power! Use Solar-powered Christmas lights, battery-operated Christmas lights, rechargeable or USB lights, or convert a light socket into a plug-in by using a light-socket adaptor.
How do you hide extension cords for outdoor string lights?
Start by attaching one end to the tree canopy (use the plug end to make it easier to hide the extension cord). If your lights don’t have built-in clips, use zip ties to secure. 6. String the lights along the branch towards the post; when you reach the post, wrap the wire around one of the hooks.
How do you hang lights on a deck without drilling?
One of the ways to hang outdoor patio lights without nails is using adhesive hooks or gutter hooks. Alternatively, you can tape or staple them to your wall. You can also hang them on trees, bushes, posts, potted plants, and your fence. Another way to brighten up your patio is by using lanterns.
How many string lights do I need for my patio?
Typically, you can attach three to five strands of patio lights together, depending on the length of each strand. However, each manufacturer indicates on the box the number of strands that can be connected.
What kind of pole do you use for string lights?
Long vertical poles secured with concrete footings are an easy way to support twinkling string lights and are sturdy enough to stay up for the entire summer season. A little carpentry work and a few basic supplies are all that’s required, and this DIY project can be done in one day.
Can I use PVC pipe to hang string lights?
It can be a little tricky when hanging lights on a slope. You will want to dig an 18″ hole and then place a PVC Pipe into it. Just make sure it goes below the grass line. We used a level to help guide the pole around and make sure it was straight up and down.
How do you hang string lights in your backyard fence?
Attach metal mounting hooks or cup hooks onto the wooden posts. These hooks will hold your string lights so you want to be sure that you secure them firmly. Screw your mounting hooks or cup hooks into the wooden posts at one end. Install the posts onto your fence to support your lights.
Should I leave the porch light on at night?
Should you leave your porch light on all night? DON’T leave the light on all night. You might think it’s tough to even tell the light’s on during the day, but it’s more noticeable than you think. DO set your lights to a timer or a solar sensor so they automatically flip each day when it gets dark.
Do string lights use a lot of electricity?
A string of 25 incandescent C9 bulbs — the big plump ones often used outdoors — uses 175 watts of electricity, which works out to a whopping $15.12 to run over a season (assuming 12-hour-a-day operation for 45 days). If you swap those out for LEDs, your electricity cost shrinks to a little over 80 cents.
