Table of Contents
How to Hang Outdoor String Lights Step 1: Measure & Prep. The first thing to do is measure for both your string lights and the cable guide wire you need for spanning across any open spaces. Step 2: Mount Screw Hooks. Step 3: Connect & Tighten Cable. Step 4: Attach Your String Lights. Step 5: Sit Back and Enjoy!.
What is the easiest way to hang outdoor lights?
The best way to hang outdoor string lights depends on where you are hanging them. If you have trees, it’s easy to hang lights. Just drill a hole into a tree, install a cup hook, wrap the light around it and secure it with a zip tie. Or you can thread them through the branches and not anchor them.
How do you hang string lights in your backyard without trees?
How to Hang String Lights In Your Backyard Without Trees Along a Fence. Aside from hanging string lights on trees, perhaps the easiest method is to hang along a fence. On Patio or Deck Railing. On Other Existing Supports. On Other Shrubbery. Build Your Own Supports. Waterproof. Length and Bulb Type. Power Source.
How do you use outdoor string lights?
STEP 1: Choose the right lights. The first step in the process is choosing the right set of string lights for your outdoor living area. STEP 2: Choose the mounting locations. STEP 3: Install the hooks. STEP 4: Mount the string lights on the hooks. STEP 5: Plug in the outdoor string lights and enjoy!.
How do you hang string lights on a patio?
Step 1: Select Anchor Points. Lay string lights around the perimeter of your deck. Step 2: Install Screw Eyes. Predrill holes into the wood structural supports in your marked locations. Step 3: Attach String Lights with Carabiners. Step 4: Install Light Bulbs. Step 5: Attach String Lights to Power.
How do you wire a string of lights?
Let’s walk through it. Step 1: Measure & Prep. The first thing to do is measure for both your string lights and the cable guide wire you need for spanning across any open spaces. Step 2: Mount Screw Hooks. Step 3: Connect & Tighten Cable. Step 4: Attach Your String Lights. Step 5: Sit Back and Enjoy!.
How do you hide extension cords for outdoor string lights?
Start by attaching one end to the tree canopy (use the plug end to make it easier to hide the extension cord). If your lights don’t have built-in clips, use zip ties to secure. 6. String the lights along the branch towards the post; when you reach the post, wrap the wire around one of the hooks.
What kind of pole do you use for string lights?
Long vertical poles secured with concrete footings are an easy way to support twinkling string lights and are sturdy enough to stay up for the entire summer season. A little carpentry work and a few basic supplies are all that’s required, and this DIY project can be done in one day.
How do you hang outdoor lights without nails?
One of the ways to hang outdoor patio lights without nails is using adhesive hooks or gutter hooks. Alternatively, you can tape or staple them to your wall. You can also hang them on trees, bushes, posts, potted plants, and your fence. Another way to brighten up your patio is by using lanterns.
Can I use PVC pipe to hang string lights?
It can be a little tricky when hanging lights on a slope. You will want to dig an 18″ hole and then place a PVC Pipe into it. Just make sure it goes below the grass line. We used a level to help guide the pole around and make sure it was straight up and down.
How do you hang string lights in your backyard fence?
Attach metal mounting hooks or cup hooks onto the wooden posts. These hooks will hold your string lights so you want to be sure that you secure them firmly. Screw your mounting hooks or cup hooks into the wooden posts at one end. Install the posts onto your fence to support your lights.
How can I light my backyard at night?
14 Lighting Ideas for the Perfectly Bright Backyard Mix Up Different Lighting Styles. Uplight Trees to Create a Moonlight Effect. Illuminate Walkways. Sprawl Light Orbs Across the Fence. Light Up Water Features. Plant Tiki Torches. String Lights Up Tree Trunks and Branches. Create Shadows with Spotlights.
How do you attach string lights to siding?
All you need are these vinyl siding clips. To attach them to the hooks, I just used an old wire coat hanger to loop through the screw holes in my boxes, twist, and hang them up. The little hooks made it really easy to string our outdoor lights to the corner of our house too.
How far apart should string lights be?
The average spacing between sockets on a patio light string is at least 12 inches. However, spacing can range from 12 inches to 3 feet wide.
Can you staple outdoor string lights?
Leave a little slack at the area closest to the power source and use a staple gun with ¼-in. staples to attach the string lights closest to the power source. Unplug the cord from your outlet. Pull the cord taught, but not tight, and continue stapling the string lights along your path.
How can I power my outdoor lights without an outlet?
How Can I Power My Outdoor Lights Without an Outlet? You may power your outdoor lights without an outlet – even without power! Use Solar-powered Christmas lights, battery-operated Christmas lights, rechargeable or USB lights, or convert a light socket into a plug-in by using a light-socket adaptor.
Do string lights need guide wire?
Using support wires isn’t required. If you want to drape them through the trees, that’s ok, too!. But it does relieves stress on the electrical wire and allows you to keep the lights taught above your head and all hanging the right direction.
