Table of Contents
One way to help minimize the draft is to install glass doors on the front of your fireplace opening. These glass doors will still radiate heat throughout the room, but will not allow the open flue to let in the cold draft. Another great solution for preventing these drafts is to install a direct vent gas insert.
Why is cold air coming in through my gas fireplace?
If cold air is coming from a gas fireplace, it’s likely due to the flue being locked open using a c-clamp or damper. This is to allow airflow from an external source. If not, you can turn off the gas supply, find the flue in the firebox, remove the c-clamp, and stuff the flue to stop the cold air.
How do you seal a gas fireplace insert?
Adhesive Strips. Available at many hardware and home improvement stores, small rolls of fiberglass-based stripping can be cut to size and applied in noticeable gaps between an insert and the masonry on the outside face of a fireplace, underneath the insert.
Can you insulate around a gas fireplace?
Heatilator gas fireplaces can be vented through the top or the side. A built-in insulation basket is included with the fireplace around the vent. The fireplace itself is heavily insulated and you should not install insulation into the walls surrounding the firebox.
How do you fix a fireplace draft?
Solutions for a Draft Chimney Keep the damper open whenever a fire is burning. If your damper doesn’t work properly, get it replaced. Leave a few of the windows cracked to allow fresh air into the home and smoky air out. Limit your use of green wood or wet wood straight from the outdoors.
How do you fill gaps around a fireplace insert?
Instructions Remove the Loose Mortar. Remove the fire grate from the fireplace and use a fireplace brush and dustpan to sweep out the firebox. Clean the Mortar Joints. Fill the Joints With Caulk. Smooth the Caulked Joints. Cure the Caulk.
How do you secure a fireplace insert?
Installation Steps Put a Cover Plate on Your Chimney. It is recommended to put a cover plate on your chimney before installing an electric insert to prevent water from coming in. Close and Seal the Damper. Install a Power Outlet. Insert the Firebox into Your Fireplace. Attach The Trim or The Frame.
What can I seal my fireplace with?
Fireplace 101: 6 Ways To Seal Your Fireplace Option #1: Inflatable Chimney Balloon. Option #2: Fireplace Cover or Door. Option #3: Insulating foam board. Option #4: Specialized Fireplace Damper With Rubber Seals. Option #5: Drape of Plastic or Insulated Magnetic Fireplace Cover. Option #6: Thin Slab of Stone.
Is drywall safe around a gas fireplace?
This homeowner renovated his fireplace and put sheetrock or drywall up around the front of his fireplace. Unfortunately, this is highly flammable and is not an appropriate or safe fireplace surround.
What is the insulation looking stuff in my gas fireplace?
That looks like rockwool. It glows when it’s engulfed in the gas burner flames to represent glowing embers. There is a sand base in the burner to diffuse the gas if you’re burning NG. With LP gas that base material is usually vermiculite.
Can you close the damper on a gas fireplace?
If you have installed gas logs in your fireplace, the damper should never be closed. If you have a pilot light constantly burning under your gas logs, shutting the damper puts you, your family and your pets at severe risk of carbon monoxide poisoning.
How do I stop a fireplace draft?
To stop a fireplace draft close the damper between fires, or use a form of draft stopper such as a chimney balloon or draft excluder if a fireplace doesn’t have a damper. The damper must be opened, or the draft stopper removed, before any fire.
Why does my fireplace have a draft?
What Causes a Drafty Fireplace? When there isn’t a fire in the the fireplace, then the fireplace and chimney are just another opening to the out doors. Both indoor and cold outside air will flow in the direction of high-pressure moving to low-pressure.
Why is there a draft from my fireplace?
The size of a chimney needs to be built relative to the size of the appliance that will vent into it. A chimney that isn’t sized correctly will lead to fireplace draft issues. This problem most commonly arises when a gas insert is installed and the liner is not properly sized or insulated for the new upgrade.
How do you insulate behind a gas fireplace?
Apply insulation (batt or spray foam) within the framing of the wall up to the ceiling or roof line. Install a thin structural sheathing material (e.g., drywall, rigid insulation, lightweight steel or aluminum sheeting). Bend the liner at the corners or seal seams with a bead of adhesive.
How do I make my gas fireplace warmer?
How to Get Maximum Heat Output From Your Gas Fireplace Setting thermostat to the maximum value. Ensuring flue damper and fireplace are well sealed to prevent warm air from escaping. Using a blower to spread warm air evenly throughout the room.
Can you caulk around fireplace insert?
Just about anything will do there – if it is between face and drywall sounds like it might be pre-fab (metal) fireplace. Caulk should be non-combustiblewe have used silicone, etc. which is good to 500F +.
Can you use spray foam around fireplace?
To keep a fireplace working properly, never use spray foam on the inside of the fireplace or the chimney, or on the damper. On the exterior surfaces of the fireplace and chimney, spray foam is fine because these surfaces won’t get hot enough to melt it or to cause any damage.
How do you seal a fireplace opening?
You can seal off an unused fireplace by installing wood or light-gauge metal framing, insulation and drywall over the entire wall or opening. If you intend on using it in the future, install an insert constructed out of 2″ rigid foam board glued to MDF. Seal around the insert using neoprene backer rod insulation.
