Table of Contents
Why is my ceramic tap dripping?
Ceramic disc taps feature a cartridge within the tap that contain a pair of ceramic discs. If you do experience dripping this is usually caused by a scratched ceramic disc. In order to rectify the leak you must replace the entire cartridge as follows.
How do you repair a leaky ceramic faucet?
How to Fix a Leaky Faucet: Ceramic Disk Type 2Loosen the setscrew with the hex wrench, and remove the handle. 3Lift off the decorative cap. 4Loosen the cartridge. 5Lift off the cartridge. 6Remove the seals on the bottom of the cartridge. 8Remove the O-ring from the faucet. 9Coat the O-ring with silicone grease.
How do ceramic tap cartridges work?
Ceramic disc cartridges are simply two ceramic discs with holes through them. One disc is fixed in place whilst the other moves with the tap handle. When both discs are in alignment, the water is allowed to flow through the tap. When they are no longer aligned, the water stops.
Why does my tap drip after I turn it off?
The faucet valve (working parts) is housed in the handle and controls the on/off, volume, and temperature control. Over time, a faucet valve can lose its ability to make a water-tight seal, so water will drip out even in the off position.
Are ceramic disc taps any good?
Plumbing connections for ceramic disc are no different to other taps, and with that comes all the ease of a quarter-turn technology, and a more durable, longer lasting tap without those annoying leaks. From a long-term maintenance point of view, ceramic disc taps are much better than normal taps.
Can you change a ceramic tap washer?
Remove the retaining washer and tap it on the kitchen or bathroom surface. With any luck, the ceramic disc cartridge will fall out of the valve body. You can replace the actual discs themselves though this is a far more precise, specialist task.
How do I know what type of faucet I have?
5 Tips to Identify the Brand of a Kitchen Faucet Find the logo. The first and easiest way to find out the brand of your kitchen faucet will be if you can locate the logo somewhere on it. Find a model number. Count the splines on the broach and measure the stem. Distinguishing features. Use a broach gauge.
How do you fix a tap that keeps turning?
Turn the valve stem over and unscrew the washer on the end with a Phillips screwdriver. Replace it with a new one and tighten the screw to hold it, instructs This Old House. Drop the valve back into the faucet, screw on the retaining nut and tighten it with pliers. Replace the handle and turn on the water.
Do ceramic disc taps wear out?
Ceramic disc taps are designed to last a lifetime. Unfortunately, in hard water areas they do not and it is as well to know how they operate and how to service them. It is very rare for the ceramic discs to wear out and the need to replace them is even rarer.
How does a water tap cartridge work?
HOW DO CERAMIC TAP CARTRIDGES WORK? A ceramic tap cartridge consists of a valve body holding two discs, each with holes through the middle. In the closed position the holes on the two discs are in different positions and this prevents water flowing through the tap.
How long do ceramic tap washers last?
Ceramic tap washers can last years, but other types can last for as little as twelve months depending on how frequently they’re used.
Why is shut off valve leaking?
Since cut-off (shut-off) valves are rarely used, the washer inside the valve can become hard or covered with mineral deposits over time. When you close the valve then open it again, the washer on the valve stem may not seat properly, causing it to leak around the valve stem nut.
How do you descale a shower valve?
Remove handle and trim piece from the front of the valve body. With channel lock pliers, unthread the cartridge and remove from the valve body. Soak the cartridge in white vinegar for an hour. Remove and rinse thoroughly with water.
How do you descale a tap cartridge?
Soak the cartridge in the water and vinegar mix for around 10 minutes. If when you take it out, the cartridge still has limescale on it, it simply needs to be soaked for longer. Add a little more vinegar to the mixture, soak a cloth in it and wrap it tightly around the cartridge.
What is the best type of tap washer?
Nylon tap washers are a popular option for sealing tap valves closed. Due to their properties, nylon spacer washers provide a reliable seal on most types of tap. Typically, nylon sealing washers are chosen for offering: High strength.
What is a ceramic disc faucet?
Ceramic Disc Valve. The newest type of faucet valve is the ceramic disc valve. This innovative valve design incorporates two rotating discs made from ceramic. The discs contain channels that align when rotated, which allows water to flow and control over temperature settings.
How do I know what bathroom faucet I have?
The most obvious and quickest solution is to look for a logo — the manufacturer’s symbol — that identifies its faucets. Each manufacturer has a distinctive logo that sometimes appears on the escutcheon — the plate beneath the faucet — the body of the faucet, the spout itself or somewhere on the handle.
What are the different types of faucets?
The Four Most Common Types of Faucets Ball Faucets. Ball faucets are a type of single-handle faucet that’s easily identifiable by the handle sitting on top of a ball-shaped cap on the top of the faucet spout. Disc Faucets. Cartridge Faucet. Compression Faucet.
