Table of Contents
Do you overlap starter shingles?
With the starter shingles laid along the very edge of the roof, run a set of starter shingles along the sides of the roof as well, making sure that those rows come down and overlap the starter shingles you laid at the bottom.
Do you need a starter strip for shingles?
The starter strip is crucial because it adheres to the shingles on the edges of your roof and protects them from the elements. Without starter strip shingles, a gust of wind would have no trouble sneaking under the shingles on the edges of your roof and blowing them up, and perhaps even off, your roof.
How many nails should be used per shingle?
General Guidelines for Nailing Shingles Install the recommended number of nails per shingle. For Duration® Series shingles, Owens Corning recommends using either a 4- or 6-nail fastening pattern depending on the roof’s slope and building code requirements. In most cases, 4 nails are adequate.
How do starter shingles work?
Starter shingles are the initial shingle products installed on the roof, just before the first course of the finish shingles, which will comprise the visible parts of the roof. Each Leading Edge Plus starter strip “shingle” is perforated right down the middle so that you get two starter strips out of each roof shingle.
What is the spacing on architectural shingles?
The Hip & Ridge shingles can be separated into three equal pieces (perforated lines are provided). Each piece bends lengthwise to provide equal exposure on both sides of the ridge. The ridge shingles are nailed 6 inches apart from the exposed butt edge. Every ridge shingle gets two nails, one on each side.
How do you shingle a roof step by step?
Roll out the self-stick underlayment. Stick on the underlayment. Cover the roof with felt paper. Roll on the felt paper. Overlap the ridge. Waterproof your valleys. Fold flashing over the peak. Install the shingles. Working around vents and stacks. Shingle over the vent flashing.
How much should shingles overlap?
Overlap each row at least 3 to 4 inches. If you live in an area with inclement weather, you should consider using a special leak barrier protector. Then, install new flashing (metal flashing is often called “drip edge” along the bottom of the roof near your gutters) and starter shingles at the edges.
What length should I cut my starter shingles?
Cut 12 inches (30.4 centimeters) off the length of the first shingle that you lay. Then lay down whole tiles to the end of the row, trimming the last shingle so that it fits correctly.
Why do I need a starter shingle?
The starter shingle’s two purposes are water protection and wind protection at the eave and rake. A starter shingle is used to seal with the field shingle at the first course along the eave and rake. This helps prevent wind and water from getting beneath the shingle in this critical location.
What is roofing starter strip?
A starter strip is an asphalt based shingle utilized to waterproof the eave and rake edges of your home during a re-roof. Adhesive tar strips help prevent shingle blow-off from harsh winds (along eaves as well). A straight line to properly orient each new row of shingles.
Can I replace my roof myself?
The truth is, anyone can replace their own roof, with the help of the many DIY websites. For residential houses, roof replacements typically take two days – the first day to remove the old roof, and the second day is to install the new one. A day or two more can be necessary depending on the size of the roof.
What is the cost of roofing a house in Nigeria?
Aluminium Roofing Sheets: Types & Prices in Nigeria Sheet Type Price for 0.45mm Price for 0.55mm Long span aluminium N2,300 per meter N2,850 per meter Step-tile aluminium N2,600 per meter N2,950 per meter Metcoppo aluminium N2,700 per meter N3,100 per meter.
How much does it cost to do a roof yourself?
According to some roofing experts, a 2,200 to 3,400 square foot roof with asphalt shingles could run between $2,000 and $6,000 if you do it yourself, whereas a professional roofing company will charge around $10,000 or $12,000 for architectural asphalt shingles.
How many nails do I need for 18 squares of shingles?
Shingle manufacturers recommend using four nails per shingle in the main part of the roof and five nails per shingle in the first row. This amounts to an average of 320 nails per square, or 100 square feet. In high-wind areas, you need five nails per shingle, or 480 nails per square.
How many nails do you put in a 3 tab shingle?
Your first nail should be ½” below the strip and 1” from the edge of the shingle. Your next two nails should be placed above the tab cut-outs for 3-tab shingles or evenly placed below the sealant strip on other types of shingles.
How long should nails be for 2 layers of shingles?
Layers. If you are putting a layer of asphalt shingles over an existing layer of asphalt shingles on to a 3/4-inch deck or a plank deck then you should be using 1 1/2-inch nails. If your decking is less than 3/4 inch then a 1 1/2-inch nail will suffice.
Do you run starter shingles on the rake?
Applying starter strip shingles should fall on your roof’s eaves and gables or rake edges. Applying it on the eaves helps cover the joints between the finished shingles to provide waterproofing. Installing a starter shingle on your gables carries a different function from using it to the eaves.
Are architectural shingles better than 3-tab?
Because of their durability and high-quality composition, architectural shingles generally have a longer lifespan than the 3-tab variety. They stand up better to weather conditions such as heat, snow, ice, rain, and strong winds. Their average lifespan is about 18 to 20 years.
