Table of Contents
Stain the Deck Boards Don’t stain yourself into a corner. Stain the deck boards using a paint pad applicator. Apply one coat of stain in long, even strokes. Use a paintbrush to stain between cracks and in any problem areas. Once you’re finished, clean the brushes and paint tray.
Is it better to brush or roll stain on a deck?
The agitation and friction caused by a paint brush will cause the wood to absorb more stain. So if you are spraying or rolling the stain, always back-brush it in with a brush while the stain is still wet; you’ll achieve much better penetration in to the wood.
What are the steps to staining a deck?
How to Stain a Wooden Deck First Steps. When staining your deck, first make sure it is clean and dry. Maintenance. Step 1: Sweep the Surface. Step 2: Creating a Plan. Step 3: Protect Exterior Walls. Step 4: Add Stain to Tray. Step 5: Attach Pole to Paint Pad. Step 6: Stain Deck With Paint Pad.
What is the easiest way to apply deck stain?
Apply the deck stain with a natural bristle brush. A roller gets the job done faster, but brushing helps force the stain into open grain and pores. It’s especially important to work stain into butt joints where two boards meet.
Do I need to strip my deck before staining?
Strip and Renew Wood Before Restaining Solid-color stains protect wood decks and look great when new, but even the best solid color deck stain eventually flakes and wears away. At that point, they need to be scraped and stripped off before the deck can be recoated.
How many coats of stain should you put on a deck?
The general rule of thumb is to apply only as much deck stain as the wood can absorb. Typically this will be 2 coats, unless your dealing with extremely dense hardwoods which may only be able to absorb 1 coat of wood stain.
What if it rains after I stain my deck?
If it rains within 48 hours after you apply the stain, the water will soak into the wood pores and try to displace the stain. This will result in a splotchy surface rather than an even tone. If it rains right after you apply the stain, the stain will peel and flake off.
Do you seal a deck after staining?
Most of the time, stains also contain a protective sealant. It’s a good idea, though, to re-seal your deck (or check that it needs to be re-sealed) once a year. Water-based stains can adhere to water or oil-based coatings already present on the wooden surface.
Can you use a roller to stain a deck?
A paint roller can be used to roll stain on. A wide 18-inch roller may work well for staining a few fence or deck boards at a time but a mop or stain pad will hold more stain lessening the amount of time you have to dip back into the stain bucket.
When should I stain my deck for the first time?
You can stain a new deck immediately after installing your deck, but this is not the best time to do it and here’s why: the lumber is still too wet. The best time to stain a new deck is 3 to 12 months after installing it.
What temperature should it be to stain a deck?
Helpful Stain Application Tips Apply stain only at the proper temperature. For most stains, 70 degrees Fahrenheit is the optimum, with the safety range from 50 to 90 degrees Fahrenheit.
What grit sandpaper should I use on my deck?
Sand the Deck Use 60- or 80- grit sandpaper on the main deck boards, and use 80- or 100-grit on the handrails. After sanding, vacuum the deck thoroughly to ensure that dust does not settle on the new finish.
Can I stain over stain without sanding?
You do not need to sand off the previous stain and finish. The purpose of the light sanding is to give a little tooth to the surface to help your new stain colour stick.
Will pressure washing remove deck stain?
Pressure washing is a quick way to remove a deck finish, but it requires some care so as not to damage the deck. A pressure setting of 1500 psi should be strong enough to clean away deck stain. Hold the sprayer about 3 inches off the surface and move the sprayer as you work in the same direction as the grain.
Why is my decking stain peeling?
Deck stains will generally peel for two basic reasons: over application and poor adhesion. This is simple — too much stain on the surface of the wood. With deck stains, specifically with semi-transparent finishes, more is not better. You only want to apply as much product as the wood can easily absorb.
How do I know if my deck needs a second coat of stain?
A good rule of thumb is to lightly touch the portion that has been stained. If it feels tacky to the touch (a little sticky and not wet) then you can apply the second coat.
Do I have to wait 4 hours between coats of stain?
For a deeper color and sheen, wait one hour and apply a second coat. After 1 hour, the surface is dry to the touch. Wait overnight before subjecting the wood to normal use. For a deeper color and sheen, wait one hour and apply a second coat.
How long should deck dry before staining?
In perfect drying conditions, 48 hours is enough for the wood to get to where it needs to be before staining. Decks that don’t get much sun should be given an extra day to dry out. If after a day or two the wood still looks wet or there are soft spots, give it more time to dry out.
Can you stain a deck over multiple days?
Ultimately you want two set aside at least two days. If you need to power wash your deck or replace any boards it may take you an extra day or two. It is ideal to stain your deck in a season that experiences mild temperatures. The direct sunlight can cause the deck to dry too quickly which will leave water marks.
How long after staining a deck can you walk on it?
In most cases a full body stain or acrylic deck finish will be dry to touch within an hour in dry, hot weather. After two hours you could take a chance and walk on it with shoes, though I’d recommend barefoot. After about 4 hours you should be able to safely walk on your deck.
Can you stain a deck in the evening?
If you stain your deck in the summer, make sure you do it out of the direct sunlight. Applying a deck stain in direct sun will cause the stain to dry to quickly and can result in premature stain failure. In the summer, stain your deck in the morning or evening so the deck surface isn’t too hot.
