Table of Contents
Can you stain a really old fence?
If you’re looking to change things up or bring new life to your old fence, you can also try staining or painting it. There are advantages to both staining or painting your wooden fence. But in either case, consider the aesthetic of your backyard and home before applying color.
Can you stain a weathered wood fence?
Fences usually face severe weathering, so expect the finish to last no more than three years. Before recoating, wash the fence with a garden hose sprayer and use a bristle brush on stubborn dirt deposits and stains. Let the fence dry and stain it using the same method.
Do you have to sand an old fence before staining?
Do I need to sand the fence first? You should not stain over a painted fence, sand it first to prepare the surface. If you want to add color choose a stain which will bring out the best from the grain of the wood. Often a clear stain looks best, showing off the quality of the grain in the new fence on the property.
Can you stain weathered wood?
Staining Weathered Wood When you are done repairing, cleaning and stripping the deck, it’s finally time to stain that weathered wood. A semi-transparent stain will impart a little color to the deck wood while still allowing the grain to show through.
How do you treat an old wood fence?
Step 1: Create a mixture of water, bleach and dish detergent. Step 2: Put your protective gloves on before using the pump up sprayer to spray the fence with the mixture. Step 4: Once fence is completely dry, apply Ready Seal with either a paint brush, paint roller, or a pump up sprayer.
How do you refinish old fence boards?
Sand all sides of the boards with a belt sander or palm sander, first using 80-grit sandpaper then working up to progressively finer-grit sandpaper until you achieve the desired finish. A smooth-as-glass finish isn’t necessary, but sand down raised grain and remove remaining weathered wood to reveal new wood.
How do you stain a GREY fence?
How to Stain a Gray Fence Lay a drop cloth around the bottom of the fence to protect the lawn. Scrub the surface of the fence with soap and water or wash the wood with a power washer. Sand the wooden surface with power sander until it is smooth. Apply the stain with a roller to a three-foot section of the fence.
Is it better to stain or paint a fence?
Paint creates a thicker barrier initially, but it also chips and peels, obvious defects that make the fence appear worn, thus requiring immediate attention. Stain, on the other hand, simply fades over time and doesn’t have to be replaced as often, meaning you will likely have to buy less of it over the years.
How many coats of stain do I need for a fence?
In most cases, solid-color stains are like traditional paint and need just one coat to protect your fence. Semi-transparent penetrating stains often need two coats, with the second coat applied approximately an hour after the first coat.
Do I need to stain both sides of my fence?
A question that customers sometimes ask is whether both sides of the fence should be sealed. In reality, if one side of the fence faces a neighbor and they choose not to stain or seal their side will discolor and yours won’t, without this affecting the structural integrity of the structure.
Should I pressure wash my fence before staining?
Should You Power Wash Before Fence Staining? More often than not, it is not a good idea to power wash a fence before staining it. Power washers can force the mold and mildew (the greying color of the fence) deeper into the wood pickets. This causes the wood to deteriorate quicker.
Can you stain a fence after a year?
Consider the type of wood, and then wait the proper amount of time (usually anywhere between 1 and 6 months) before staining or sealing your fence. This will allow it to sufficiently weather and to dry or cure.
How do you refinish a fence a different color?
Directions: Wet the fence down with a garden hose. Let dry (visually dry, doesn’t need to be overnight). Spray on the Brighten product with the sprayer. Let dry completely (24 hours best) before applying the stain. Use a sash brush to get into corners and cracks. Let dry overnight and apply another coat.
How do you prepare old wood for staining?
Sand Thoroughly The best way to stain wood is to prepare the wood surface by sanding it with a sanding block or orbital sander. Start with 120-grit sandpaper on refinished pieces. When you have removed imperfections and sanded the entire surface, wipe off the dust and loose sandpaper grit.
Can you stain an older deck?
Clear finishes and transparent stains are fine for new wood, but for older decks, Starling recommends using a semitransparent stain. ”The grain still shows through, but the pigment gives the old wood a clean, uniform color and helps the new wood blend in,” he says.
What is a good fence stain?
Best Overall: Ready-Seal Natural Cedar Exterior Wood Stain and Sealer, 5 Gallon. Protect your fence from natural elements like rain and UV rays with this semi-transparent stain from Ready-Seal. This oil-based formula can be applied to all hard and softwoods.
