Table of Contents
How to Arrange Gas Logs Place the largest ceramic logs on the bottom to serve as the foundation for the fire. Leave 2 inches (5 centimeters) between logs. Make sure none of the logs is blocking the gas flow. Arrange smaller logs on top of the foundation logs.
Can you use fake logs in a gas fireplace?
You should put logs in a gas fireplace. Wood logs aren’t designed for gas fireplaces. There are designer lines of logs that are made to look authentic to natural wood, while some are even handpainted to get just the right look. Sometimes, even with fake logs, your fireplace may still experience soot build-up.
How do you arrange synthetic coals on a gas fire?
Coals must always be arranged correctly in a gas fireplace. The manual to our gas fireplace explains: ‘The coals must not be crammed together, or inserted into the holes in the matrix. A well laid out, generously spaced coal layout will give the best results.
How can I make my gas logs more realistic?
Use vermiculite instead. You can find rock wool, silica sand, vermiculite and crackling ash granules at a fireplace supply store or order online. You may need to turn the fireplace off and shift the rock wool around until it resembles a realistic pile of embers.
What are the fake logs in a gas fireplace made of?
A: Most gas logs are made from a ceramic fiber or refractory cement mixture designed to withstand high temperatures. Sometimes steel reinforcement bars are added to the inside of the logs to increase their strength and to prevent them from bending or cracking under extreme heat.
Can I use gas fire without coals?
as long as you meet ventilation requirements, there is no need to put the coals on. this is only a DFE fire.
How do you arrange pebbles on a gas fire?
The underside of each pebble is marked with a number ‘1’ to ’16’ and an arrow. The pebbles should be positioned so that the arrows always point towards the back of the fireplace opening. When located into position the stem of each arrow should be at 90° to the rear of the fireplace opening (See figure 3). 5.
Why are my gas logs turning black?
Soot buildup is commonly caused by clogged burner ports and improperly positioned fire-logs. This contributes to soot formation on the fireplace. Another primary cause of soot is clogged gas burner ports. It creates an unbalanced or incomplete burn, allowing soot to form on the doors and logs.
How do you arrange fake fireplace logs?
How to Arrange Gas Logs Place the largest ceramic logs on the bottom to serve as the foundation for the fire. Leave 2 inches (5 centimeters) between logs. Make sure none of the logs is blocking the gas flow. Arrange smaller logs on top of the foundation logs.
How can I make my gas log fireplace look real?
Towards a gas fireplace that looks like a ‘real’ fireplace Step 1 | Install the burner bed on andirons with a grate or in a fire basket. Step 2 | Invest in beautiful ceramic logs. Step 3 | Place a fireback against the back wall of the fireplace. Step 4 | Place antique fireplace accessories around the fireplace.
What does vermiculite do in a gas fireplace?
Coarse grade exfoliated vermiculite that used in gas log fireplaces. By pouring into the burner pan, vermiculite granules add sparkle and shine to the fireplace for a real wood burning effect and evenly distribute the flame.
Where do you put Rockwool in a gas fireplace?
Decorative ROCK WOOL is used on VENTED gas logs or to replace the wool on DIRECT VENT GAS FIREPLACES. Rock wool is a fibrous material made from minerals. Placed on top of the sand in a natural gas log set, the fire passes through it, becomes red hot and glows without melting or burning.
What do you put under gas logs?
Supplies Needed To Freshen Up Your Gas Fireplace Silica Sand (not needed for a propane fireplace) Vermiculite (optional for natural gas fireplace) Rock Wool. Platinum Embers (optional for more dimension) Lava Rock.
Who makes the most realistic gas logs?
H. Peterson Real Fyre Gas Logs are the most realistic gas logs because they are meticulously hand-crafted to resemble natural wood and carefully designed and arranged to produce a flame that looks just like a real wood fire.
Where do you put vermiculite in a gas fireplace?
Vermiculite is mostly used for Propane (LP) gas logs. It is poured into the burner pan to aid the heavier LP gas to spread across the burner more effectively. Provides a nice looking base under the gas logs and allows the gas to permeate through it easily.
Can you use andirons with gas logs?
We carry fireplace both new and antique andirons made for use with wood (long shank) and for use with gas logs or very small fireplaces (short shank). The short shank styles allow the andirons to sit in front of a gas log set for a most realistic look.
Can I replace my gas fire coals with logs?
If you are looking for replacement gas fire coals or other ceramics such as logs or pebbles then we would recommend matching the size as close as possible to the ones that are being replaced, this ensures a similar visual flame effect on the gas fire.
Why does my coal effect gas fire smell?
Because they burn only small amounts of natural gas or propane, they are safe to operate indoors. However, any flame requires oxygen to keep burning. If that air contains impurities, those impurities are drawn in with the oxygen and can produce odors which are amplified by the flame.
Does a gas fire require a hearth?
Do Gas and Electric Fireplaces Need a Hearth? While glass front gas fires do still require a hearth, electric fireplaces do not have as many requirements. In fact, most electric fires don’t require a hearth at all! Nevertheless, hearths remain popular even when they are not strictly necessary.
Can you replace coals with pebbles?
Most gas fires with pebbles can be changed to coals but not normally the other way around. Coal effect gas fires generally burn richer with a more yellow flame and are too sooty to have pebbles. And some gas fires with white stones can also be swapped for coloured glass beads.
