Table of Contents
To get the correct size, simply count 3 rivets on the chain and measure the distance between them from the centre points. Now divide this by half to get your size. As an example, three rivets that measure ½ an inch across divided by two gives you a pitch of a ¼ inch.
How do you measure chain size?
Chain Link Sizes: How to Measure Chain Link Sizes Pitch is measured by finding the distance from the center of one pin to the center of the next pin in line. Determine your side plate height and thickness by measuring both inside and outside the roller chain to ensure that you’re seeing a good average size.
What does 72 mean on a chainsaw chain?
72 = 3/8 pitch .050 gauge or 1.3mm. 73 = 3/8 pitch .058 gauge or 1.5mm.
What size chain do I need?
After a measurement is obtained, its a good idea to opt for a necklace size that is at least the second size up from your neck size. For example, if you have an 18 inch neck, you should probably choose a chain length of 20 inches or more. An 18 inch chain would feel too tight.
What’s the difference between 404 and 3/8 chain?
Secondly, the numbers 3/8″ and . 404″ refer to the pitch (distance) between the drive links – these are the bits on the chain that stick down and engage with the drive sprocket on the saw, and the sprocket on the roller-nose end of the bar.
How do I know what chain I need for my chainsaw?
To determine the pitch (chain size), you’ll need to measure the distance between any three consecutive rivets, then divide the result by 2. The rivets are the small, round pegs/studs that hold the chain segments together. Measure from the first to the third, then divide that number in half to get your chain pitch.
What do Stihl chain numbers mean?
Find the gauge of the chain by locating the number stamped on the drive link. A 1 equals a 0.043-inch gauge, 3 equals a 0.050-inch gauge, 5 corresponds to a 0.058-inch gauge, 6 means the chain has a 0.063-inch gauge. A 0 means the chain has a 0.080-inch gauge, but this gauge size is found only on the Harvester chain.
How long is a 20 inch chain on a woman?
20″: A 20″ necklace falls a few inches below the collarbone, perfect for women who want some breathing room with their chain. This length chain works best with a higher neckline.
Is a 22 inch chain too long?
For example, if a man’s neck is 17 inches, then a 19 inch necklace would be the smallest size expected to fit comfortably. This length necklace can be worn inside or outside a shirt. 22 Inch. Another very common length for a man’s necklace, it can work nicely a cross, dog tag, or other pendant is added to the chain.
What is a good thickness for a chain?
Width: As a general rule, the thicker the chain, the more durable it is. Most chains are 1mm to 1.5mm, which is sturdy enough to hold most small to medium sized pendants. If you go below 1mm, just keep in mind that a thinner chain is less strong, even if it has a daintier look.
What are the different chain sizes?
Chain standards Size Pitch Maximum Roller Diameter 40 0.500 in (12.70 mm) 0.312 in (7.92 mm) 50 0.625 in (15.88 mm) 0.400 in (10.16 mm) 60 0.750 in (19.05 mm) 0.469 in (11.91 mm) 80 1.000 in (25.40 mm) 0.625 in (15.88 mm).
How many feet is a chain link?
The chain is a unit of length equal to 66 feet (22 yards). It is subdivided into 100 links or 4 rods. There are 10 chains in a furlong, and 80 chains in one statute mile.
How do you calculate chain pitch?
To count the number of pitches in a strand of chain, we would start our count from the first pin on one end of the piece of chain and move to the next pin, which would be one pitch, and then on to the next pin, which would be another pitch, and so on until the end of the strand of chain is reached.
What is a 3/8 chainsaw chain?
3/8″ low-profile chains typically fit chainsaws whose guide bars are 18″ or shorter in length, which are the majority of medium-use, non-professional application chainsaws such as a homeowner might own. .
What size is 404 chainsaw chain?
404 has . 063 drive links. . 375 uses . 050 or .
What is a 404 chainsaw chain?
404″ Pitch Harvester Bars & Chains 404″ Pitch Cutting System for its rugged endurance and unmatched ability to keep up with the extreme torque and RPM’s generated on modern equipment.
What size chain is on my Stihl chainsaw?
If you are replacing a Stihl® chain, you can look at the numbers on the side of the chain to determine pitch, gauge, and other characteristics of the chain. Example: Your chain has the number 33RM2 stamped in the side of it. The last three numbers (or letters) denote characteristics of the chain.
What is the difference between .325 and 3/8 chain?
325 is a smaller top cutter and tie strap it is easier to turn for a saw . The 3/8 is a bigger top cutter and tie strap . Mainly in a 20 ” chain has more cutters in .
How many links does a 18 inch chainsaw have?
325 Pitch, . 063 Gauge. Learn more about free returns.
What is the difference between Stihl green and yellow chain?
Others will chime, looks like green is homeowner (and dirty condition) safety chain. That stays sharper longer in dirty conditions. The yellow looks like full chisel, cuts faster but dulls quicker.
How do I know what Stihl chain I have?
Identifying STIHL Saw Chains STIHL’s green and yellow color code system serves to identify STIHL bars and chains with different kickback reduction characteristics. Green (go) marks those products which are designed to reduce the risk of kickback injury and comply with the ANSI B175. 1 kickback standard.
What size chain is on a Stihl ms180c?
Quick Chain Adjuster (QCA) (B) POWER SOURCE Gas GUIDE BAR LENGTH (Recommended) 16 in. OILOMATIC® CHAIN 3/8″ PMM3 CHAIN OIL CAPACITY 4.9 oz. ENGINE POWER 2.0 bhp.
