Table of Contents
2. Pour 1 gallon of household bleach and 1 gallon of white vinegar directly into the well. Pour each along the inner edge of the well casing to disinfect the inner surface of the well.
How much bleach does it take to shock a well?
CALCULATE AND POUR: Pour 3 pints of chlorine bleach per 100 gallons of water plus an additional 3 pints into your well as described above. MIX: Attach a clean garden hose to the outdoor faucet nearest the well and place the end of the hose inside the well.
What happens if you put too much bleach in well?
According to AskingLot, if you put too much bleach in your well, it can destroy the good bacteria found in the well, which can be a significant problem! The company also says that you should dilute the bleach with water so the pipes do not get ruined.
How do you shock a drilled well with bleach?
Dug well (1 meter/3 foot diameter) Add 1 litre (1 quart) of household bleach for every 1.5 metres (5 feet) of depth of water. If you don’t know how high the water stands, use the well casing depth to estimate how much household bleach to use.
Is it safe to put bleach in well water?
You can disinfect your well with household chlorine bleach such as Clorox, Purex or a generic brand. The chlorine in the bleach kills bacteria. Note that it may take more than one chlorination for your well to return a satisfactory test.
How long should you wait to drink water after you chlorinate a well?
Once the chlorinated water has reached all the appliances, fixtures and faucets, let the chlorinated water stand in the well and plumbing system for 8 hours. WHILE THE CHLORINE IS IN THE SYSTEM DO NOT DRINK THE WATER. CONTACT WITH THE WATER MAY CAUSE SKIN, EYE AND NOSE IRRITATION.
How do you flush a well water system?
Disinfection Procedure Mix 2 quarts bleach in 10 gallons of water; pour into well. Connect a garden hose to a nearby faucet and wash down the inside of the well. Open each faucet and let the water run until a strong chlorine odor is detected, then turn it off and go to the next one. Flush the toilets.
How do you shock chlorinate a well?
Use ordinary liquid laundry bleach to shock chlorinate the water system. Determine how much bleach to use, then pour the bleach down the well and circulate it through the whole water distribution system. Wait 6-12 hours for the chlorine to work, then flush the chlorinated water from your well and pipes.
Why does my well water turn brown when I add bleach?
The brown is the iron in the water that has oxidized as a result of the chlorination. Normally, the iron in water is in ion form and does not display itself until it combines with oxygen and forms common rust which turns the water reddish-brown.
How much does it cost to shock a well?
To disinfect your well and eliminate the bacteria, you should chlorinate the well. You can hire a company that services wells to do the chlorinating. The cost ranges from $80 – $200.
Can you shock a well yourself?
This involves distributing household bleach or chlorine into the well system so that it can slowly kill off all harmful bacteria. While it’s possible to perform shock chlorination yourself, it’s recommended that you seek the help of a professional.
How long does it take to smell bleach when shocking a well?
3. Mix the bleach with the well water. Ⅰ Attach a hose to the nearest outside faucet and allow the water to run onto the ground for 1-2 minutes until you smell chlorine. Then place the hose in the hole where you poured the bleach, allow the water to run back into the well for 15-20 minutes.
How often should you chlorinate a well?
Homeowners with private wells should have their well water tested every 3 to 5 years for some contaminants, including bacteria. If these tests turn up positive for bacteria, chlorinating the well may be a way to resolve the problem.
How long does it take to get bleach out of your well?
Monitor the process, it can take 30 minutes to 24 hours or more to flush all of the bleach solution from the well. Use chlorine test papers to verify that the water coming from the outside faucet or yard hydrant is clear of any bleach solution. Flush the chlorinated water from water heaters.
How much Clorox should I put in my well?
Bleach should not be put into the well straight from the bottle. The general recommendation is to dilute the laundry bleach 1:100, (one gallon of bleach to 100 gallons or water; half a gallon of bleach to 50 gallons of water; a quart of bleach to 25 gallons of water.).
Can I put a chlorine tablet in my well?
the well has been flooded or exposed to bacterial contamination in another manner, such as a crack in the well cap. Chlorine granules, tablets and liquid chlorine in the form of household bleach can all be used to disinfect your well.
How long does water stay brown after shock?
The chlorine used to shock the well reacts with iron, manganese and reducing bacteria in the well and it is pulled into the water chlorine solution. That is the brown you see. Flushing the well by running the hoses for at least 12 hours or upto several day will clear up the problem.
Why did my well water turn brown?
Iron and manganese, rust, silt, tannins, and the well itself can be the cause why well water suddenly turns brown. While water discoloration can be a problem, there is no need to immediately hire the services of a plumber. It can be contaminated with rust which causes it to turn brown.
