Table of Contents
Shock Your Pool with Chlorine to Kill Algae This is the main event in clearing a green pool—killing the algae. Pool shock contains a high level of chlorine that will kill the algae and sanitize the pool. For the best results, use a shock that contains at least 70% available chlorine, and shock the pool twice.
How much shock do I need for a green pool?
Green or Dark Green Pool Water: This means there’s a medium amount of algae in your water and you’ll need to triple shock your pool. Triple shocking requires 3 pounds for every 10,000 gallons of pool water.
Can you over shock a green pool?
Continue this process until you notice the water changing color to either cloudy white, light green or clear. YOU CANNOT OVER SHOCK A POOL ! Green or cloudy water will quickly clog a filter, therefore you may have to backwash your filter many times a day until the pool clears.
How long does it take to shock a green pool?
You need to raise the level of your chlorine – shock the pool – and maintain that high level until all the algae is dead. This may take 3 to 4 days.
What do I do if I shocked my pool and it’s still green?
You simply need to introduce hydrochloric acid to the water as this acid neutralises basic elements. Don’t worry if you’ve accidentally added too much. Since you’ll be retesting the levels after chemically shocking the pool, you can make any further adjustments then.
Can you over shock a pool?
You cannot overshock a swimming pool or add too much. Adding too much shock or overshocking your pool will kill off algae. The negative of adding too much shock is it will upset the chemical balance of your pool. It’s likely to do that regardless of if you overshocked the pool or not.
Why is my pool green with high chlorine?
When the levels are properly balanced, chlorine will keep the algae at bay, but the water will slowly begin to turn green as the algae take over if there’s not enough. But be careful—adding too much chlorine in pool water can cause those metals to oxidize and turn the pool a different shade of green.
Do you put algaecide in before shock?
While shocking and adding algaecide is effective in getting rid of algae, it should not be done together. This is because when you mix chlorine and algaecide together, it renders both of them useless. Hence, you should first shock the pool and wait for the chlorine levels to fall below 5 PPM.
Can you shock a pool without the pump running?
It all depends on the type of pool and the chemical levels in the pool. Your pool can keep running for a few days with no problems while without a pump. However, know that a standard pool needs a pool running for at least once in 24 hours, or you might notice an algae bloom.
How long does it take shock to work?
Keep your pump and filter running. Give the shock a good 12 to 24 hours to work it’s magic. If the algae hasn’t cleared up after 24-48 hours, clean and brush the pool and add another shock treatment.
How many times a week should you shock your pool?
How Often Should I Shock My Pool? Shocking your pool regularly will help to keep the water clean and free of contaminants. You should aim to shock your pool about once a week, with the additional shock after heavy use. Some tell-tale signs that your pool needs to be shocked are cloudy, foamy, green, or odourous water.
How long should you run filter after shocking pool?
A pool filter should be run for a minimum of 6 hours after shocking a swimming pool. This is to allow the filter to clean the water and give the shock enough time to fully mix with the pool water. Running the filter after shocking for 24 hours to 7 days is necessary if the pool has a large amount of algae.
Should I shock my pool even if chlorine is high?
If your total chlorine level is high, you will use a non-chlorine shock; if it is low, you will use a chlorinated shock. As a rule, you will need to raise free chlorine to 10 times your combined chlorine to hit what is known as “break point.” Therefore, it is good to deal with combined chlorine while it is still small.
Will baking soda clear a green pool?
The use of baking soda in pools can spot treat algae No one ever wants to see algae build up in their swimming pool. It can turn any backyard pool murky green or cause unsightly black spots on the walls and floor of any swimming pool.
Why won’t my green pool clear up?
Green or cloudy water will quickly clog a filter, therefore you may have to backwash your filter many times a day until the pool clears. The pool will never clear up if the filter is not working properly ! Once the water does clear up, you will most likely see debris on the pool floor (dead leaves, algae, etc.).
Why is my pool still green after chemicals?
Algae will remain in your pool after shock if you’ve had insufficient chlorine and an overabundance of metal elements in the pool water. Therefore, to start the cleaning process. Remove all the debris from the pool with a leaf net and then let the smaller dirt fragments settle.
