Table of Contents
How much fabric do I need for a valance?
The obvious answer is that it depends, but you should expect to need somewhere between 1-1/2 to 5 yards of face fabric for a standard 36- to 40-inch window. For double-wide windows (about 70 to 80 inches wide), about 2-1/2 to 8 yards of face fabric is a realistic estimate.
What can I use instead of a valance?
Tablecloth Linens. A crafty homeowner can whip up a window treatment with any textile—even table linens! Debbie from Debbie Doo’s took pretty cloth napkins and hung them from a rod using curtain clips. The result is an easy and cheerful alternative to a traditional valance.
What is the standard size of a valance?
If you’re shopping for ready-made valances, the most common standard size you’ll likely come across is a 50-inch wide valance. If you’re hiring a custom workroom, you can specify any size.
How much of a window should a valance cover?
For most windows, a valance should cover about 2 to 6 inches of the top of the window and window frame (this is called the window overlap), with the rest of the valance covering the wall above the window. If there is not enough room to do this, then the valance should be hung immediately under the ceiling.
What is the average length of a window valance?
It depends on the style of the valance, as well as how it’s installed and how high the ceiling is. Outside-mounted valances usually have an average drop length of 17 to 21 inches if hung on walls with 8-foot ceilings, and that length gets proportionately longer as the ceiling gets taller.
What is a valance box?
The basic difference is that a curtain valance is just a short curtain, about a foot long, hung over the main curtain, at the top of the window. A box valance is solid, covered with fabric, as if the curtains were mounted directly into the box.
What’s the difference between a valance and a cornice?
Curtain Valance vs. The primary difference between a curtain valance and a cornice is that valances are made out of drapery or fabric, while cornices are typically made out of wood. Valances also add a softer accent to a room.
What does a tailored valance look like?
Tailored valances are often just a few inches wider than the window. Here, a 40-inch window was dressed with a 42-inch valance. Ring top valances like this goblet pleat valance can be tailored, too. Even though the valance hangs casually and can be adjusted on the rod, this adjustment is limited to just an inch or two.
Are valances out of style 2021?
So, to answer the question above, Yes, valances are still in style when made out of trending fabrics, colors and designs! Plus, classic designs are always in style, they just may need to be updated in a more current fabric pattern or color.
Is a valance necessary?
Window valances are a must if you’d like to add dimension and weight to your window. However, it’s very popular nowadays to put a valance under a drapery as well to make a window look modern. Either way, by layering your window treatments you will have a unique look that most people don’t have in their homes.
How can I cover my window for privacy without curtains?
How to Add Privacy to Any Window Without Curtains or Blinds Privacy Screen. Hanging Object. Plants. Frosted Glass. Faux Stained Glass. Macrame. Shelving. Outdoor Shutters.
What is the standard depth of a valance?
Another rule of thumb used by decorators is that the window valance depth should be 1/4 of the overall window height, plus 1 inch. A 60-inch tall window, then, would call for a 16-inch deep valance, while a 48-inch window calls for a valance about 13 inches deep.
What sizes do window valances come in?
Window Valance Size Chart & How-To Guide For windows measuring You will need 40 inches – 48 inches 2 – 3 Valances 49 inches – 72 inches 3 – 4 Valances 73 inches – 96 inches 4 – 5 Valances 97 inches – 120 inches 5 – 6 Valances.
What is the average height of a valance?
Just keep in mind that valances are normally 15-25 inches (38-63cm) high and placing the valance higher may allow the top part of the window casing to show underneath the valance when the drapery panels are opened. 3. If you like a puddled drapery bottom, add 4 inches (10cm) to the total of the height measurements.
How wide should a valance be for a 36 inch window?
To determine the width of a valance for a 36-inch window, the Window Treatment Expert website suggests adding 2 to 4 inches on each side, adding less for narrower windows and more for wider windows. For a 36-inch window, this measurement would provide you with a valance that has a width of 40 to 44 inches.
How deep should a curtain valance be?
Another rule of thumb used by decorators is that the window valance depth should be 1/4 of the overall window height, plus 1 inch. A 60-inch tall window, then, would call for a 16-inch deep valance, while a 48-inch window calls for a valance about 13 inches deep.
How deep should a window cornice be?
Your cornice should be an inch or two longer than the curtain rod, including the finials, to make it easy to install. It should also be deep enough to clear the finials and the rings by 1 inch.
How long should a box pleat valance be?
Most likely your valance will be long enough to come into the window {it should be: at least 2″-3″ minimum} so you’ll want the fabric lined when the light shines through the window. Anything with a good amount of polyester will work fine.
What is the purpose of a valance?
What is the Purpose of a Valance or Cornice Board? Valances and cornice boards are usually made of fabric, wood, or metal, depending on the type of style of your window covering. They are meant to hiding the top hardware of your window coverings and give your windows a more tidy, interesting look.
What is the box above curtains called?
A pelmet (also called a “cornice board”) is a framework placed above a window, used to conceal curtain fixtures. A pelmet can be made of plywood, and may be painted, or fabric covered.
