Table of Contents
How much fabric do I need for a 20×20 envelope pillow?
How much fabric do I need to make envelope pillow covers? 16″ x 16″ – cut 17″ x 38″ – 1/2 yard of fabric. 18″ x 18″ – cut 19″ x 42″ – 2/3 yards of fabric. 20″ x 20″ – cut 21″ x 46″ -3/4 yards of fabric.
How much do you overlap envelope pillows?
Basic Instructions: The ends will overlap approximately 3″ at the back when finished. This extra fabric is to ensure that the pillow form will be hidden when the pillow cover is in place. To calculate the fabric measurement you will need measure your pillow insert.
How much fabric do I need to cover an 18×18 pillow?
Sizing Up Fabric Needs for Pillow Covers Dimensions (Length by Width) Amount of Fabric Needed for 1 Pillow Cover (Using 54-inch Wide Fabric with No Pattern Matching) 14 x 14 inches 1/2 yard 16 x 16 inches 1/2 yard 18 x 18 inches 5/8 yard 20 x 20 inches 3/4 yard.
How do you make an envelope pillow case for a bed?
METHOD: Step 1: Measure your pillow. Common bed sized pillows are the following sizes: Step 2: Measure and cut out your pillowcase pieces. Step 3: Finish both ends of your pillowcase. Step 4: Sew 3 sides of your envelope pillowcase together. Step 5: Sew down the flap. Step 6: Finish the edges.
How do you make a simple pillow case?
How to Make a Pillowcase Cutting your fabric. Start by cutting two identical size pieces of fabric, that are each 29.5 inches long and 21 inches wide. Fold fabric, iron, pin, and sew. Repeat step 2 with the second piece of fabric. Pin the pieces together and sew. Flip the pillowcase right side out and it’s ready to use.
What is the flap on a pillowcase for?
“Envelope pillows” have an inner flap to hide your pillow insert. I’ve also included measurements for queen/king pillows. I’ll show you how to make it with and without a serger machine. If you only have a basic sewing machine, and hate the look of zig zag edges, use this method instead.
How do you measure fabric for envelope pillows?
The formula for your fabric cut is your pillow size times 2 plus 6. So for example my pillow is 18″x18″— 18″ x 2 + 6″=42″.If your pillow is: 16″ x 16″ measure fabric 16″ x 38″ 17″ x 17″ measure fabric 17″ x 40″ 18″ x 18″ measure fabric 18″ x 42″ 19″ x 19″ measure fabric 19″ x 44″ 20″ x 20″ measure fabric 20″ x 46″.
What is envelope style pillowcase?
What are Envelope Closure Pillowcases? Traditional pillowcases are open on the ends. An envelope pillowcase has a special envelope closure at the end of the case, so the pillow is tucked in and out of sight for a more finished look when making up the bed. Recently, these cases have picked up in popularity.
How do you measure fabric for a pillow?
Measure the width of a pillow cover as from side seam to side seam, and the length as from the top seam to the bottom seam. Typically the bottom seam houses the zipper or hook-and-loop closure. Add seam allowances and cut the pillow fabric to the new measurements.
How much should the back of a pillow sham overlap?
The two hemmed edges should overlap about 8-10″, and all the other raw edges should line up with the pillow front panel. Next, pin all the way around the pillow sham. (TIP: be sure to pin all the layers together where the two back panels overlap to ensure you catch the inside panel in your stitching!)May 3, 2016.
How much bigger should a pillowcase be than the pillow?
Opt for a pillowcase measuring 1/2 to 1 inch longer than the pillow length and 2 1/2 to 4 inches wider than the pillow width, if you’re buying a ready-made pillowcase.
How much fabric do I need for 2 18 pillows?
Basic Square Pillow SIZE Fabric Repeat: 0″ TRIM 12″ 1/3 yd 1 1/2 yds 14″ 1/2 yd 1 2/3 yds 16″ 1/2 yd 2 yds 18″ 1/2 yd 2 1/4 yds.
How do I calculate how much fabric I need?
Figure out how much fabric you need with this formula: Width of fabric divided by width of one piece equals the number of pieces that fit into width (rounded down to the whole number). Total number of pieces divided by number of pieces that fit into width equals number of rows you need.
How much fabric do I need to make a 16×16 pillow?
fabric {1/2 yard is good for a 16 X 16 or smaller pillow}Mar 11, 2020.
How much fabric do I need for a standard size pillowcase?
A finished standard pillowcase should measure about 22.5 inches by 31.5 inches, allowing for fill depth, seaming and an approximate 4-inch hem. One yard of 45-inch-wide fabric should be enough to make one standard case, if the material is preshrunk.
What are the dimensions of a standard pillow case?
20 inches by 26 inches Pillow Size Measurements (Inches) Measurements (CM) Standard 20 inches by 26 inches 51 CM by 56 CM Queen 20 inches by 30 inches 51 CM by 76 CM King 20 inches by 36 inches 51 CM by 92 CM Body 20 inches by 54 inches 51 CM by 137 CM.
How do you make a pillowcase without a sewing machine?
no sew. You can literally wrap your already covered pillow (or pillow form) up like a burrito, meaning the only thing you have to purchase is fabric from your local craft store. You simply take a square of fabric, place the pillow towards one corner, wrap, tie, and you’re done!Mar 28, 2016.
What are the 5 steps of drafting a pattern for pillowcase?
How to Make a Simple Pillow Case Step 1: Make a “Pattern” Using a pillowcase you already have, measure the rectangle to find how big you need to make yours. Step 2: Cut Fabric. Step 3: Pin the Fabric. Step 4: Sew. Step 5: Make the Opening Hem. Step 6: Pin the Panels Together. Step 7: Sew Around the Panels. Step 8: Done.
