Table of Contents
How far apart should grommets be placed on curtains?
Generally, grommets are spaced about 6 inches apart on center. The first and last grommet are inset the space needed for the return to the wall, and in front of the window at the leading edge.
How full should grommet curtains be?
The grommet panel must be a minimum of 70 inches wide, between the side hem seams, to provide just slightly more than 1.5 times fullness on the 40-inch space. Purchase more panels and push the grommets closer together on the rod for a fuller look.
Can you join two pairs of curtains together?
Place the curtain panels on top of one another, right sides together. Then pin the vertical edges you unpicked together. If your fabric is quite thick you may opt to clip the two panels together instead. If you’re working with patterned panels check that the pattern matches before and after pinning.
Can you put two pairs of curtains together?
You can sew two pairs of equal-length curtains together to make one pair. The curtain hems will line up after you align the casings if the curtains are the same length.
How do you keep grommet curtains evenly spaced?
Grommet panels fall into gentle pleats when in the open position, but each pleat must be adjusted every time the drape is closed. To keep them in place requires a small sleight-of-hand trick from a drapery workroom that allows you to open and close the drapes with the pleats remaining even and adjustment free.
How high do you hang 84 inch curtains with grommets?
If you are interested in a curtain with grommet tops, there will usually be an inch and half of fabric above the top of the grommet. Therefore, an 84 inch length curtain with grommet tops will have an actual hanging height of around 82.5 inches.
How much wider should grommet curtains be than the window?
The curtain width should measure 1 ½ to double the width of the window for fullness.
Do grommet curtains slide easily?
Grommet Curtains Curtains with a grommet top have metal rings punched into the fabric that allow them to slide along the rod easily. They’re especially good for wide windows or sliding glass doors where heavy fabric can be difficult to open.
How do you make curtains overlap?
Start by gathering your curtain panels and place them one on top of the other. Take the first curtain ring of the first panel and slip it onto the rod. Take the first curtain ring of the second panel and drop it onto the rod as well. Repeat the same process, slipping one ring after another in an alternating manner.
How do you add lining to curtains without sewing?
One of the easiest ways to join your blackout lining to your curtains is with the help of something called fusible hemming web. This can be used for joining two fabrics together. Simply place the hemming web tape between the two fabrics and then using a standard iron press together until they are bonded.
Do you need 2 curtain panels?
While it may seem logical that curtains should come in sets of two, curtains do not always come in pairs. They most often come in panels. Panels are a single piece of fabric or one curtain. If you want a typical curtain pair, you will need to buy two panels.
How do you hang double curtains without a double rod?
To hang double curtains without a double rod, you can either use a bungee cord, curtain rings, or coat hooks. These are inexpensive and easy to install alternatives to a double rod which can cost you upwards $180. They can also provide an aesthetic appeal to your home.
Why use a double curtain rod?
Using two layers of curtains on your windows adds depth, making the room feel larger. Instead of adding two different curtain rods to your windows, try double curtain rods. Double curtain rods are the best way to create a layered effect, giving a distinct and put-together look.
How wide should curtains be for 72 inch window?
Let’s say you want standard, thick curtains to cover your 72-inch window. You’ll want to look for curtains that measure between 144 and 180 inches wide. Bear in mind that this is the total width to aim for, not the width for each curtain if you intend to have two (one on either side).
Can you make grommet curtains?
Grommet curtains are simple to construct, don’t require a large amount of fabric, are easy to install and operate, and look great with all types of fabrics and interiors. If you can operate a tape measure, an iron, and a sewing machine, you can make these curtains.
What can I use instead of grommets?
A webbing loop is a great alternative to a grommet for things like sails, tie downs, fabric covers and more. Webbing loops are very useful, and they even have some added benefits versus installing grommets.
How do you apply grommets without a grommet tool?
Securing the Eyelet without a Tool. Push the top eyelet piece into the hole on the right side of the fabric. Once you have created a hole in the fabric, take the top part of the eyelet and insert the male part of the piece through the hole. You may need to wiggle it to get it into place if it’s a snug fit.
Do grommets hurt?
Grommets can be made of plastic or metal. They don’t hurt, and they allow air to enter the middle ear and drain the fluid to the back of the nose and throat. Grommets are also known as tympanostomy tubes or ventilation tubes.
Do 84 inch curtains touch the floor?
Yes, curtains should be long enough to touch the floor. With a few exceptions, the longer the curtains are the more stylish and elegant it will look. This is why most standard ready-made curtains are lengthy.
Should I get 84 or 96 inch curtains?
Standard curtains come in three lengths—84 inches, 96 inches, or 108 inches. “Generally, you want to stay away from the 84 inch standard curtains unless you have very low ceilings. The 96 inch and 108 inch lengths work in a wider range of typical spaces.
