Table of Contents
How do I connect my Smart Lite to WiFi?
Wi-Fi Download the Wyze app and create an account. Select “Add a Product” from the menu in the top right corner of the home screen. Select Wyze Bulb from the list of devices. Make sure your phone is connected to your 2.4GHz wireless network. Screw in the bulb and turn the power off and on three times.
Why is my smart light not connecting?
Make sure the Wi-Fi network is a 2.4 GHz network. The Smart Wi-Fi Light will not connect to a 5 GHz network. The Wi-Fi connection may not have good coverage during set up. You may need to improve your Wi-Fi network coverage by upgrading your router or adding a range extender.
Why is my smart bulb not connecting?
The Fix: Cycle Your Device, Router, or Smart Hub We recommend first cycling the power to the device the bulb is plugged into to do a soft reset. Allow the smart bulb a minute to reconnect, then check to see if it is responsive.
How do I connect LED lights to my phone?
How to Use Smart LED Strip Lights with EZ Mode Step 1: Download LampUX App. Android and iOS users can go to the App store and download LampUX App on your phone, then register an account. Step 2: Set Up the Smart LED Light Strip. Turn on the LED strip lights and wait for 10 seconds. Step 3: Connect the App.
How do I connect to 2.4 GHz Wi-Fi?
To connect your Android device to a 2.4 GHz network: Unlock your device and tap the Settings app. Tap Network & Internet > Wi-Fi. Enable WiFi by tapping Use WiFi at the top. Select a 2.4 GHz WiFi network. If prompted, enter the password for the network.
How do I connect my smart light bulb to Alexa?
Connect a Smart Light Bulb to Alexa Open the Amazon Alexa app on your mobile device. Select the Devices tab. Choose All Devices. Scroll down to find the smart light that you want to connect. Tap the smart light’s name to complete the setup.
Why won’t Alexa connect to my lights?
If your smart light bulb isn’t working, or Alexa can’t discover it, reset your device. To reset your smart light bulb: Go to the manufacturer’s companion app or website to follow instructions specific to your device. Reconnect your smart home device to Alexa in the Alexa app.
How do I connect my lights to Alexa?
It is available on Android, iOS and Amazon Fire tablets.How do you turn lights on with Alexa? Tap on Devices at the bottom. Now tap on the + icon at the top right. Tap ‘Add Device’ Select the type of device you are setting up (Light, Plug or Switch) Choose the brand from the list. Follow the instructions on screen.
How do I reset my smart bulb?
Factory Reset Smart Light Bulbs (Bluetooth + Direct Connect) Start with light off for at least 5 seconds. Turn on for 8 seconds. Turn off for 2 seconds. Repeat this process 5 more times, or until the light bulb flashes. The light will flash 3 times if it has been successfully reset.
Why is my first light unresponsive?
The bulb might be unresponsive due to a few reasons which could be: The bulb switched off at the mains. The bulb is too far from your bridge. The bulb is too far from other Hue bulbs.
What is the app for LED lights?
The Boogey Lights® Bluetooth APP is FREE to download for either the Android or iOS smartphone operating system platforms. You just need to provide the Bluetooth Low Energy (BLE) equipped smart phone with Bluetooth 4.0 and use it with one of our Bluetooth enabled LED controllers.
Is there an app to control my LED lights?
What is Lumenplay®? Lumenplay® is an extendable string of app-enabled RGB LED lights that enables you to create scenes of color and motion, all from your smart device. Use the free Lumenplay® app to setup a personalized light show by choosing color combinations, effects, speed, direction and brightness.
How do you set up a monster smart LED strip?
1: Press and hold the pairing button on the device and ensure that the LED indicator is now blinking RAPIDLY. 2: Open the Monster Smart app. From the add device list, click on “Lighting (WiFi)”. 3: Follow the on-screen instructions to confirm that the LED indicator is rapidly blinking.
How do I change from 2.4 GHz to 5GHz?
Using the Admin Tool Connect to your WiFi network. Go to Gateway > Connection > Wi-Fi. To change your Channel Selection, select Edit next to the WiFi channel (2.4 or 5 GHz) that you’d like to change, click the radio button for the channel selection field, then select your desired channel number. Select Save Settings.
How do I change my WiFi from 5GHz to 2.4 GHz spectrum?
On the top menu, select Wireless. On the right menu, select your desired network, 2.4GHz or 5GHz. Update the network name (SSID) and password (WPA preshared key). Select Apply.
How do I change from 5GHz to 2.4 GHz?
Once you’ve logged in to your Sky WiFi Router, continue to the steps below: Click ‘Wireless’ near the top of the website interface home page. You’ll see ‘Network name (SSID)’ and ‘Password’ for ‘2.4 GHz’ and ‘5 GHz’ on this page. Enter your new details in both ‘2.4 GHz’ and ‘5 GHz’ space. Click ‘Apply’.
