Table of Contents
Base Stations should be aimed and angled toward the center of the play area. In the ideal setup, Base Stations should be above head height (at least 6.5 feet / 2 meters), angled down by 30-45 degrees, positioned no more than 16 feet / 5 meters apart, and place opposite one another in separate corners of the play area.
How do I set up a Steamvr base station?
Adjust the base stations so that the front panels are facing toward the center of the play area. Attach the power cables to the base stations, and then plug each of the adapter into a power outlet to turn them on. Important: Use only the power cables and adapters that came with your base stations.
How do you set up a base station?
Base station setup guidelines Place the GPS receiver in a location on the jobsite where equal range in all directions provides full coverage of the site. Place the GPS antenna in a location that has a clear line of sight to the sky in all directions. Place the GPS and radio antennas as high as practical.
How do you set a valve index?
Install SteamVR. Pick a Play Area. Set up your Index Base Stations. Connect your Valve Index Headset. Launch SteamVR. Run Room Setup and Enjoy VR. Prepare the Wall Mount. Prepare the Wall. Drill.
Does the valve index require base stations?
To track your movements in virtual reality, the Valve Index headset utilizes SteamVR Base Stations 2.0 or compatible Lighthouse 2.0 tracking stations that come with HTC Vive Pro.
What is a valve index base station?
Valve Index Base Station The highest-quality tracking has gotten even better with Base Station 2.0, featuring improved range, wider field of view, and support for up to four Base Stations in a single setup, creating a larger play area while reducing occlusion.
How does a base station work?
A base station connects the call in to the fixed line network. Depending on the type of call, it will be directed to either another mobile phone or to a fixed line phone. A base station is made up of antennas connected by cable to electronic (radio) equipment usually housed in a room or ‘shelter’.
Do you need Bluetooth for base station?
The SteamVR app on your computer communicates with the base stations through Bluetooth. You need the original link box to be able to update the base stations’ firmware or configure its settings. You just need to connect it to your computer’s USB port and plug in its power adapter.
Is Vive valve better than index?
The Valve Index tops the field in most respects. With dual displays canted at 5-degrees, it’s offering a 130-degree field of view with hardware IPD adjustment. While that resolution matches the Vive Pro’s, Valve is using LCD panels that have more subpixels than typical pentile OLED displays, making for clearer imagery.
What is needed for valve index?
System Requirements OS Windows 10, SteamOS, Linux RAM 8 GB+ GPU NVIDIA GeForce GTX 970+ or AMD RX480+ Available DisplayPort required, HDMI not supported CPU Dual Core with hyperthreading, or better USB 3.0+ for headset cameras.
Do Index base stations need USB?
Base Stations are passive beacons (just like the real lighthouses), they don’t need to be connected to your computer. Just plug the power and that’s it.
Can you use 1.0 and 2.0 base stations together?
No, they are not compatible. SteamVR Base Station 2.0 has a different method of syncing. Use only the same versions of the base stations in your play area so that your setup will work correctly.
Do you need controllers for valve index?
Requires Vive Pro or Valve Index Headset, Controllers, and PC. Two or more recommended.
How many 2.0 base stations can you have?
You can use up to four base stations in a single room covering 10 m x 10 m (32 ft 10 in x 32 ft 10 in).
Are valve base stations wireless?
Now with wide-area tracking, base station 2.0 powers the presence and immersion of room-scale, virtual reality by helping the Vive Pro or Vive Pro eye headsets and Controllers track their exact locations. Features wireless syncing.
How much do valve index base stations weigh?
The entire set – headset, controllers, and base station – weighs 7.83 kg (17.26 lbs) boxed, according to a user in this thread.
HOW DO base stations communicate with each other?
Each base station has a number of radio channels, or frequencies, to communicate with mobile phones. Because this number of frequencies is limited, frequencies are often reused in adjoining cells. As you move out of the cell, the phone will automatically look for signal from an adjoining base station.
What does a base station look like?
Base stations need to be located close to mobile phone users to provide good quality reception. What do base stations look like? Base stations usually consist of a small equipment cabinet or hut, and antennas mounted on a support structure. The antenna support structure can vary considerably.
What is the difference between base station and tower?
What is a Mobile Base Station? A mobile base station sends/receives radio signals and is responsible for forming the cell area. A typical cell tower is made up of several parts: (i) The antennas – to send and receive radio signals within the cell.
How do I turn on my base station Bluetooth?
Bluetooth can be enabled/disabled in SteamVR from Settings > General > Enable Bluetooth communication. On the same page, there is a button for installing Bluetooth drivers. If your base stations are not utilizing power management settings or cannot enter standby, you might need to re-install the Bluetooth driver.
How do I pair my base station with Bluetooth?
From your computer, open the SteamVR app. Click > Devices > Bluetooth Settings > Enable Bluetooth . Note: If the Bluetooth driver for the link box needs to be updated, click Update Bluetooth Driver. After installing the Bluetooth driver, restart the computer and relaunch the SteamVR app.
How do I connect my computer to my base station?
Using a micro-USB cable, connect the base stations to one of your computer’s USB ports one at time. While pressing the Channel button at the back of the base station, plug in the base station’s power adapter. Once the base station is detected by the SteamVR app, the firmware update will start automatically.
