Table of Contents
Take two of the biggest logs and place them parallel with the back of the fireplace on top of the grate. Leave space between them for the flames to reach up over the logs. Take some of the smaller logs and place them perpendicular on top of the bigger logs. Place the kindling on top of the smaller logs in a loose pile.
How do you arrange fireplace logs?
How to Arrange Gas Logs Place the largest ceramic logs on the bottom to serve as the foundation for the fire. Leave 2 inches (5 centimeters) between logs. Make sure none of the logs is blocking the gas flow. Arrange smaller logs on top of the foundation logs.
How do you install gas logs in a wood burning fireplace?
How to install a gas log set in your fireplace Read the installation manual thoroughly. Turn gas off and locate the gas supply stub in the side of the firebox. Connect the gas supply to the burner using a flexible gas line. Place the burner in the proper position in the firebox.
How many logs should I put in my fireplace?
Depending on how you choose to build your fire, four to six logs should be sufficient in creating a warm, long-lasting fire in your fireplace. If your fireplace is tall, then you can stack more if there is room.
How long do fake fireplace logs last?
With proper maintenance and usage, one of these units can last for the lifetime of the house, though the false embers and logs may need eventual replacing. If you end up selling your house, you can see up to 90% return on investment for your gas log fireplace. How Do You “Start” a Gas Log?Feb 23, 2016.
How can I make my gas logs more realistic?
Use vermiculite instead. You can find rock wool, silica sand, vermiculite and crackling ash granules at a fireplace supply store or order online. You may need to turn the fireplace off and shift the rock wool around until it resembles a realistic pile of embers.
What goes in the bottom of a gas fireplace?
Silica sand is used in the bottom of the burn pan of VENTED NATURAL GAS log sets. The gas is dispursed though the sand spreading it around before it is ignited. This gives you more flame action in your gas logs.
What do you put under gas logs?
Supplies Needed To Freshen Up Your Gas Fireplace Silica Sand (not needed for a propane fireplace) Vermiculite (optional for natural gas fireplace) Rock Wool. Platinum Embers (optional for more dimension) Lava Rock.
Can I install gas logs myself?
Gas log installation should only be done by a certified professional. Homeowners should never install their own gas logs unless they have the tools and training to do so.
Can you put gas logs in a wood insert?
In most cases, yes, both vented and ventless gas logs can be installed in a fully functioning wood burning fireplace. There are some scenarios that will not allow for the installation of a gas log set in your fireplace.
Can a wood-burning fireplace have a gas starter?
You wouldn’t dare start a wood burning fire in there. Gas starters, also known as log bars, are a wonderful, convenient and safe way to start your wood fire. The biggest benefit to a gas starter is you will have less creosote and a healthier start to your fire.
Why are my gas fireplace logs turning black?
Soot buildup is commonly caused by clogged burner ports and improperly positioned fire-logs. A fire-log that’s out of position can obstruct the flame path that ensures the clean-burning of gas. This contributes to soot formation on the fireplace. If this happens, you’ll need to clean off the fire-logs and doors.
Does log placement matter in a gas fireplace?
Gas fireplace logs, coals and other forms of media must always be arranged inside a gas fireplace in line with the requirements set by the manufacturer in the instruction manual. Arranging gas fireplace media in an incorrect order can be a safety hazard and can also affect flame performance and increase sooting.
Can I use a gas fireplace without logs?
You can use a gas fireplace without logs because the heat source is the burner connected to your gas line. Don’t use wood in your gas fireplace, as they weren’t built for wood to be their fuel source. Instead, use a ceramic log in your fireplace for additional reflective heat.
When should I add a log on fire?
You need to start your fire off small and be patient until it grows hot enough to be able to burn a large log. If your logs won’t catch fire, it may be that you have started too big. Light some kindling wood or paper first, and wait for it to catch fire to some small logs or pieces of coal.
Can I leave wood fireplace on all night?
You should never leave a fireplace burning overnight, regardless of the source. Before you go to sleep, be sure to put out the fire and let the materials cool down. Unattended fire is a hazard, and even the slightest gust of wind can reignite it or blow embers to a nearby flammable material.
When can you add logs to log burner?
Not keep adding more logs This is because cool air gets in each time you open the stove door and new wood needs to heat up before it burns – which is where you lose the burning efficiency. The best time to add more logs to a fire that’s already lit is allow it to burn down to a bed of embers before adding any more.
